Speco WDR705H User manual

INSTRUCTION
MANUAL
SPECO 960H WDR Series
4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
WDR705H
(Miniature Camera)

- 1 -
Ł

Contents...................................................... 1
Ł

Precautions................................................. 2, 3
Ł

Safety Instructions ...................................... 4
Ł

Package Contents....................................... 5
Ł

Camera Installation..................................... 5
Ł

Camera Dimension ..................................... 5
Ł

.............................................. 6
Ł

Features...................................................... 7
Ł

OSD Menu Details ...................................... 8-30
Ł

Trouble Shooting......................................... 31
Precautions

- 2 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

- 3 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
ōDo NOT use power sources other than those specified.
In USA and Canada, Use Class 2 Power Supply Only

- 4 -
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł

Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device

- 5 -
Package Contents
Please make sure that the following items are included in the Package:
WDR705H


- 2 Tapping Screws M3x10
- 2 Machine Screws M2x3
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
2. CONNECT VIDEO CABLE
- CONNECT BNC CABLE TO THE BNC JACK.
G
kjGXY}GwGz
wGpGaylk
j GaGORP
CAMERA DIMENSION
WDR705H
1.34” 1.38”
1.34”

- 6 -
SPECIFICATIONS
Speco Technologies
(Miniature Camera)
4mm Fixed Board Lens
:'5+

02'(/ WDR705H
1/3'' SONY HAD CCD 960H (DUAL SCAN)
NTSC


2:1 Interlace
Internal
Available
ON/OFF

52dB (AGC off, Weight on)
0.000006LUX
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)
Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)
ON/OFF (4 Zone)
ON/OFF (15 Zone)

0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT
ON/OFF
Auto: 64 Points
Coaxial



4mm Fixed Board Lens
-4ºF ~ +140ºF RH 95% Max
-4ºF ~ +140ºF RH 95% Max
1.34"(W) * 1.34"(H) * 1.38"(D)
0.78 lbs
Image Sensor

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D
BLC / HLC
Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch
IR OPT (SMART- IR, ATR WD-EX)
Digital E-ZOOM
DIS

Communication
Language
Power
Power Consumption
Lens
Storage Temperature
Operating Temperature
Dimension
Weight

- 7 -
FEATURES
&&04(KNVGTKPI/GVJQFQH0GYN[#FXCPEGF&04(WPEVKQP
1HZO\GHYHORSHG'ILOWHULQJHQKDQFHV'LJLWDO1RLVHUHGXFWLRQDWORZOLJKWOHYHOV'
)LOWHULQJRIWKH9LGHR6LJQDO2SWLPLVHVWKH6LJQDOWR1RLVHUDWLR
*KIJ4GUQNWVKQP
7KHFRPELQDWLRQRID6RQ\6XSHU+$'&&'LPDJHVHQVRUDQG'15'63SURYLGHVDQ
H[FHOOHQWUHVROXWLRQRI79OLQHV
9KFG&[PCOKE4CPIG
:'5LVDSRZHUIXODQGXOWUDDGYDQFHGWHFKQRORJ\WKDWFDSWXUHVFOHDQHUDQGVXSHULRU
KLJKUHVROXWLRQSLFWXUHVHYHQZKHUHWKHLPDJHVDSSHDUGDUNEHFDXVHWKHUHLVDVWURQJ
EDFNOLJKWSUHVHQW
*KIJ5RQVNKIJV$.%(WPEVKQP
8VHUV&DQ$GMXVWDQG 6HOHFWWKH 6SHFLDO5HTXLUHG$UHDWR2EVHUYHWKH7DUJHW2EMHFW
8QGHUWKH6WURQJ6SRWVRI/LJKW([LVW
+NNWOKPCVKQP
:LWKDQ ,QFUHGLEO\PLQLPXPLOOXPLQDWLRQ RI/X[ WKHVHQVRU FDQFDSWXUHJRRG
LPDJHVHYHQ LQH[WUHPHO\ORZ OLJKWFRQGLWLRQV1RLVHLVVLJQLILFDQWO\UHGXFHGE\WKH
XOWUDDGYDQFHG'15'LJLWDO1RLVH5HGXFWLRQWHFKQRORJ\
#FFKVKQPCN(WPEVKQPU
26'2Q6FUHHQ'LVSOD\PHQXZLWKPXOWL/DQJXDJHVXSSRUW
3ULYDF\0DVNLQJ]RQHV0RWLRQ]RQHV

- 8 -
Menu items can be selected by using the OSD buttons of the camera.
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
0HQX6HW8S63(&27(&+
SPECO TECH 1/3
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
AUTO
AUTO
ANTI CR
SAVE ALL
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.

- 9 -
This function is used to set the mechanical iris of the lens.
1. Move the arrow indicator to Lens using the Up and Down buttons on the Set Up menu screen.
2. Select the mechanical iris type by pressing the left or right button between Manual and Auto.
NOTE
* Move to the available submenu by moving arrow to desired feature.
/HQV
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
AUTO IRIS
TYPE
MODE
SPEED
MODE
RETURN
DC
AUTO
075
OUTDOOR

4. Press the RETURN to return to the SETUP menu.

- 10 -
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select SHUTTER/AGC by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
6KXWWHU$*&
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
AUTO SETUP
SHUT+AUTO IRIS
126
AGC->SLOW1
-----
HIGH LUMINANCE
MODE
BRIGHTNESS
LOW LUMINANCE
MODE
BRIGHTNESS
RETURN
HIGH LUMINANCE
* MODE : Shutter is fixed at 1/60, 1/50 and average brightness maintains.
* BRIGHTNESS : Adjust the brightness level 0~255 by pressing the left or the right button.
LOW LUMINANCE
* MODE
- OFF : AGC and SLOW(SENSE-UP) OFF.
- AGC : AGC ON and SLOW(SENSE-UP) OFF.
Enter the LOW LUMINANCE SETUP and adjust GAIN level by pressing the left or the right button.
- SLOW(SENS-UP) : SLOW(SENSE-UP) ON and AGC OFF.
Enter the LOW LUMINANCE SETUP and adjust SLOW(SENSE-UP) level by pressing the left or the right
button.

- 11 -
- AGC->SLOW1(SENS-UP) : AGC and SLOW(SENSE-UP) ON.
When over the selected AGC MAX level, SLOW(SENSE-UP) turns on.
- AGC->SLOW2(SENS-UP) : AGC and SLOW(SENSE-UP) ON.
When over the selected AGCMIN level, SLOW(SENSE-UP) turns on.
- SLOW(SENS-UP)->AGC : AGC and SLOW(SENSE-UP) ON.
When over the selected SLOW(SENSE-UP) level, AGC turns on.
* BRIGHTNESS : Adjust the bright level x0.25 , x0.5 , x0.75 , x1.0 by pressing the left or the right button.
* RETURN : Move previous page.
NOTE
* AGC (Auto Gain Control)
A higher gain increases brightness but also increases noise.
MANUAL SETUP
MODE
SHUT
AGC
RETURN
SHUT
1/60(S)
6(DB)
* SHUTTER : Adjust the shutter level 1/60, FLK, 1/100, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000 (S)
adjust the red color GAIN by pressing the left or the right button.
* Adjust the AGC level 6, 12, 18, 24, 30, 36, 42, 44.8, (DB) by pressing the left or the right button.
* RETURN : Move previous page.

- 12 -
3,&7$GMXVW

SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
PICT ADJUST
MIRROR
CONTRAST
SHARPNESS
HUE
R-GAIN
B-GAIN
RETURN
OFF
039
008
050
158
158

button.
* CONTRAST : Adjust the contrast level 0~063 by pressing the left or the right button.
* SHARPNESS : Adjust the sharpness level 0~015 by pressing the left or the right button.
* HUE : Adjust the color level 0~100 - RED, GREEN, BLUE, YELLOW, CYAN, MAGENTA.
* R-GAIN : Adjust the red color GAIN 0~255 by pressing the left or the right button.
* B-GAIN : Adjust the blue color GAIN 0~255 by pressing the left or the right button.
* RETURN : Move previous page.

- 13 -
:KLWH%DODQFH
This function is used to set the white balance operation mode.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
ATW SETUP
SPEED
DELAY CNT
ATW FRAME
ENVIRONMENT
RETURN
005
005
x1.5
INDOOR
* ATW : Auto tracking white, normal environment setting under fluorescent lamp or outdoors.
- SPEED : Select the start point of auto tracking speed and time by pressing the left or the right button.
- DELAY CNT : Select the start point of Auto tracking speed and time by pressing the left or the right button.
- ATW FRAME : Set up the frame megnification by pressing the left or the right button.

Select the environment by pressing the left or the right button.
- RETURN : Select return to save the changes in the ATW menu and return to the SETUP menu.
* PUSH : Regardless of subject condition, adjust white balance. Always control locking mode with full-in
frame, white color as set point.

- 14 -
* USER1 WB: The gain values for the outdoor fixed mode are used as the adjustment items of USER1 on the
internal OSD menu.
* USER2 WB: The gain values for the fluorescent light fixed mode are used as the adjustment items of
USER2 on the internal OSD menu.
* ANTI CR : COLOR rolling control
* MANUAL WB: The B and R gain values for manual WB are set on this screen.


* PRESET : Reset the adjusted color temperature side.
* PUSH LOCK : To get the most suitable status at current lighting environment, push the SET button while
camera focuses on a white plain paper.
:'5:LGH'\QDPLF5DQJH
* WDR : The wide dynamic range (WDR) function of a camera is intended to provide clear images even
under back light circumstances where intensity of illumination can vary excessively, namely when there are
both very bright and very dark areas simultaneously in the field of view of the camera.
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
WDR SETUP
MODE
CONTRAST
RETURN
ON
MIDHIGH

- 15 -
* MODE : Adjust WDR function ON or OFF.
* CONTRAST : Increase bright illuminance and dark illuminance level over average value and then control
the contrast. Select the LOW, MIDLOW, MID, MIDHIGH, HIGH by pressing the left or the right button.
* RETURN : Move previous page.
WDR OFF WDR ON
2DNR function does Y,C filtering and decrease noise.
The level of 3DNR noise removal mode is getting higher, noise removal effect will be good, but ghost effect
may be shown up. Select OFF, LOW , MIDLOW , MID , MIDHIGH , HIGH by pressing the left or the right
button.
''15
SPECO TECH 1/3
LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR
NEXT
EXIT
AUTO
AUTO
ANTI CR
SAVE ALL
Move to next page.(SETUP MENU 2/3)
1(;7

- 16 -
Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.
(;,7
This function is used to save the various settings of the internal OSD menu in the EEPROM together.

6$9($//

- 17 -
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
0HQX6HW8S63(&27(&+
SPECO TECH 2/3
SPECO TECH 2/3
HLC/BLC
DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET
BACK
EXIT
HLC/BLC
DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET
BACK
EXIT
AUTO
OFF
OFF
NEXT
SAVE ALL
AUTO
OFF
OFF
NEXT
SAVE ALL
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting, move the arrow indicator to EXIT and press the
SET button to EXIT.

- 18 -
This function is used to set the mechanical iris of the lens.
1. Move the arrow indicator to Lens using the Up and Down buttons on the Set Up menu screen.
2. Select the mechanical iris type by pressing the left or right button between Manual and Auto.
NOTE
* Move to the available submenu by moving arrow to desired feature.
+/&%/&
SPECO TECH 2/3
HLC/BLC
DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET
BACK
EXIT
AUTO
OFF
OFF
NEXT
SAVE ALL
HLC/BLC
HLC
CLIP LEVEL
SCALE
BLC
RETURN
OFF
000
010
-----
* HLC : HLC, control and mask process for a strong light source. Select OFF, ON , AUTO by pressing the
left or the right button.

* SCALE : Adjust the Brightness signal control level by pressing the left or the right button.
* BLC : Turn off or on the Back light compensation
* RETURN : Move previous page.

- 19 -
Picture can be displayed in either color of black and white.
1. Select DAY/NIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired mode using the Left and Right buttons.
'$<1,*+7
SPECO TECH 2/3
HLC/BLC
DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET
BACK
EXIT
AUTO
OFF
OFF
NEXT
SAVE ALL
* BURST : Adjust color signal ON/OFF in night(B/W) mode.
* DELAY CNT : Adjust the DELAY time level 0~255 for day&night switch by pressing the left or the right
button.
* DAYNIGHT : Adjust the DAYNIGHT switch level 0~255 by pressing the left or the right button.
* NIGHTDAY : Adjust the NIGHTDAY switch level 0~255 by pressing the left or the right button.
* IR OPT : If you select AUTO, SMART IR function will be applied to the whole field.
DAY&NIGHT SETUP
BURST
DELAY CNT
DAY->NIGHT
NIGHT->DAY
IR OPT
EXTON
RETURN
OFF
003
000
000
OFF
ON