SpectraLink 7520 User manual

QUICK START GUIDE
1
Spectralink® 7520
for 8x8 Virtual Oce
Charge your handset 14-16 hours prior to rst use for
best performance.
Quick Start User Guide
For detailed information, see the Spectralink 7520 for 8x8 Virtual
Oce User Guide available for download at
www.8x8.com/Support/BusinessSupport/Documentation.aspx.
Basic Handset Options
Removing the Battery Protection Strip
1. To remove the battery, press down the back cover and slide it
towards the bottom of the handset.
2. Lift o back cover.
3. Remove the battery, and then remove the green slip from the
bottom of the battery.
Installing the Battery
1. To install battery press down back cover and slide it towards
the bottom of the handset.
2. Lift o back cover.
3. Insert battery with the label readable. Align the contacts of
the battery with the corresponding connectors on the battery
compartment and insert the battery towards the connectors.
Warning: Make sure that the contacts of the battery and the
connectors of the battery compartment are aligned before
sliding the battery in the battery compartment.
4. Press back cover back in locked position (when you hear a click
the back cover is in position).
Note: The product label, including the CE logo, can be found in the
battery compartment.
Turning Handset On/O
• To turn on the handset, press left softkey.
• To turn o the handset, press left softkey and hold down until
the question Turn o? appears in the display. Conrm
with Yes.
Adjusting Speaker Volume
Use the key placed at the upper right side of the handset for volume
control.
Locking Keypad
• Press Menu followed by *to lock keypad.
• Press Unlock followed by *to unlock keypad.
Shortcuts
Predened Shortcuts
Predened shortcuts are unchangeable and assigned to dierent
keys on the handset.
Silent mode On/O: Press the Menu button, followed by the #
button to turn the handset silent mode on/o. In silent mode the
ringer will be muted and the vibrator activated.
Call list: Press left side of the navigation key to enter Call list.
Missed Calls: Press right side of navigation key.

QUICK START GUIDE
Spectralink Handset
2
Find Name: Press top or bottom of navigation key.
Exit Menu: While navigating menus, press the Rbutton to exit the
menu and return to the main screen.
Save contact: Dial number and press Save.
Personal Shortcuts
Personal shortcuts consist of functions you have chosen to add
from a list of shortcuts. The list is assigned to the right softkey.
To add a shortcut:
1. Press Shortcut.
2. Scroll to Edit shortcut and press Select.
3. Press Select to add the function to the list of personal
shortcuts.
To use a shortcut:
1. Press Shortcut.
2. Scroll to the desired shortcut and press Select.
Making Calls
O Hook Dialing (Dial Directly)
1. Press to make a call.
2. Dial number.
3. Press to terminate the call.
On Hook Dialing (Pre-Dial)
1. Dial number.
2. Press to make a call.
3. Press to terminate the call.
Speed Dial
• Press a key (0-9) continuously for three seconds until a call is
started.
Assigning Speed Dials
1. Press Menu to enter main menu
2. Scroll to Phone Book and press Select.
3. Scroll to Find Name and press Select.
4. Locate the desired name, and press Details.
5. Scroll to the desired number and press Select.
6. Scroll to Add to speed dial and press Select.
7. Scroll to the desired position and press Add name.
Dialing From Call List
1. Press left side of navigation key to enter Call list.
2. Scroll to desired name or number and press .
Dialing From Phone Book
1. Press Menu to enter main menu.
2. Scroll to Phone Book and press Select.
3. Scroll to Find name and press Select.
4. Find the desired name and press to make a call.
Last Call Return
• Dial *69 and press .
Auto Attendant
• Dial 444 and follow the voice prompts.
Voicemail
• Dial 555 and follow the voice prompts.
Transfer Call to Voicemail
1. Press Rto put the call on hold.
2. Dial 594 and follow the voice prompts.
Conference Bridge
• Dial 556 and follow the voice prompts.
Intercom Call
• Dial *64 followed by the number you want to make an
intercom call to.

QUICK START GUIDE
Spectralink Handset
3
Answering Calls
• Press to answer a call when your handset rings.
Mute a Call
• Press Silence and the ring signal is muted.
Reject a Call
• Press Reject to refuse the call.
Call Hold
• Press R.
• To return to the call, press Ragain.
Call Transfer
• While o hook, press R. Then dial the number you wish to
transfer call to.
Call Waiting
• Press R to answer a waiting call (puts original call on hold).
• Press Rto toggle back and forth between two calls.
Call Park
1. Press Rto put the call on hold.
2. Dial 460.
Turning Speakerphone On/O
• While on a call, press Loud on to turn speakerphone on.
• Press Loud o to turn speakerphone o.
Turning Microphone Mute On/O
• While on a call, press Mic Mute to turn microphone mute on.
• Press Mic on to turn microphone mute o.
Turning Call Record On/O
• While on a call, press *0 to turn call record on.
• Press *0 again to turn call record o.
Move Active Calls
(8x8 Adjunct accounts only)
If your Spectralink 7520 handset is congured as an adjunct to your
desktop phone, you can move active calls back and forth between
your desktop phone and the handset.
To Move an Active Call to the 7520
1. While on an active call on your desktop phone, dial *88 on
the handset.
2. Press .
To Move an Active Call from the 7520
• Dial *88 on your desktop phone.
Forwarding Calls
Note: 8x8 recommends using online call forwarding instead
of phone-based call forwarding so your call forwarding
instructions are stored online instead of on your phone. If
you set your call forwarding rules on your phone, they will not
be in eect if your phone is disconnected from an Internet
connection.
To enable online call forwarding (Virtual Oce):
1. Log on to your Virtual Oce Online dashboard at
http://virtualoce.8x8.com.
2. Select Settings then Call Forwarding.
3. Update your Call Forwarding Rules and press Save.
You can return to Virtual Oce Online at any time to update your
Call Forwarding Rules.
Local call forwarding (phone based):
• To enable local call forwarding, dial *21*, plus the number you
want to forward calls to, plus #.
• To disable local call forwarding, dial #21#.
• For Adjunct cordless phones, use online call forwarding (above)
to forward calls for both your cordless phone and desk phone.
Changing Settings
Adjusting Ringing Volume
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Ringing volume and press Select.
4. Press left or right side of navigation key to adjust the volume.
5. Press Set and then Back.
Changing Ringing Tone
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.

QUICK START GUIDE
Spectralink Handset
NASDAQ: EGHT
www.8x8.com
© 2014. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM466/1211
The Champion
For Business
Communications
3. Scroll to Ringing tone and press Select.
4. Scroll to desired ringing tone and press Change to listen to
chosen ringer tone.
5. Press Back.
Turning Vibrator On/O
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Vibrator and press Select.
4. Scroll to On or O and press Change.
5. Press Back.
Adding Contact to Phone Book
1. Press Menu to enter main menu.
2. Scroll to Phone Book and press Select.
3. Scroll to Add name/number and press Select.
4. Type the name of the contact using the keys 2-9.
5. Scroll to number and enter the number of the contact
(max. 24 digits).
6. Press Save to store name and number.
Handset Options Status
To display the status of the handset options (battery, ringer volume,
rmware, etc.)
1. Press Menu to enter main menu.
2. Scroll to Status and press Select.
3. Press the top or bottom of the navigation key to highlight the
appropriate menu item, and then press Select to enter the
menu of the selected item.
Headset Volume
1. Press Menu to enter main menu.
2. Scroll to Settings and press Select.
3. Scroll to Advanced and press Select.
4. Scroll to Headset and press Select.
5. Scroll to Headset volume... and press Change.
6. Press left or right side of navigation key to adjust the volume.
7. Press Set.
Switch Between Headset and Handset
When the headset is active and the handset is o hook, the audio
can be switched between the headset and the handset.
1. Activate handset / headset soft key by pressing the left or the
right side of the navigation key.
2. Press Handset, and the audio is switched to the handset.
3. Press Headset, and the audio is switched back to the headset.
Handset Icons
External incoming call
Internal incoming call
Missed call
Battery charging
Keypad locked
Microphone muted
Silent mode
For more icons, refer to the full user guide available for download at
www.8x8.com/Support/BusinessSupport/Documentation.aspx.