Spectrex SharpEye 40/40I User manual

Model 40/40I
Triple IR (IR3) Flame Detector
User Guide
FM, CSA Approved
Class I Div. 1 Groups B, C, D
Class II/III Div. 1 Groups E, F, G
ATEX, IECEx Approved
Ex II 2G D
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T96°C Db
www.acornfiresecurity.com
www.acornfiresecurity.com

www.acornfiresecurity.com
www.acornfiresecurity.com

Warranty iii
Legal Notice
The SPECTREX SharpEye Optical Flame Detector described in this document is the property of
Rosemount.
No part of the hardware, software or documentation may be reproduced, transmitted,
transcribed, stored in a retrieval system or translated into any language or computer language,
in any form or by any means, without prior written permission of Rosemount.
While great efforts have been made to assure the accuracy and clarity of this document,
Rosemount assumes no liability resulting from any omissions in this document, or from misuse
of the information obtained herein. The information in this document has been carefully
checked and is believed to be entirely reliable with all of the necessary information included.
Rosemount reserves the right to make changes to any products described herein to improve
reliability, function, or design, and reserves the right to revise this document and make
changes from time to time in content hereof with no obligation to notify any persons of
revisions or changes. Rosemount does not assume any liability arising out of the application or
any use of any product or circuit described herein; neither does it convey license under its
patent rights or the rights of others.
Warning: This manual should be read carefully by all individuals
who have or will have responsibility for using, maintaining or
servicing the product.
The detector is not field-repairable due to the meticulous
alignment and calibration of the sensors and the respective
circuits. Do not attempt to modify or repair the internal circuits
or change their settings, as this will impair the system's
performance and void the SPECTREX product warranty.
Warranty
SPECTREX agrees to extend to Purchaser/Distributor a warranty on the SPECTREX supplied
components of the SharpEye products. SPECTREX warrants to Purchaser/Distributor that the
products are free from defects in materials and workmanship for a period of five (5) years,
commencing with the date of delivery to Purchaser/Distributor. SPECTREX expressly excludes
damage incurred in transit from the factory or other damage due to abuse, misuse, improper
installation, or lack of maintenance or “Act of God” which are above and beyond its control.
SPECTREX will, upon receipt of any defective product, transportation prepaid, repair or replace
it at its sole discretion if found to have been defective when shipped. Said repair or
replacement is SPECTREX’S sole liability under this warranty and SPECTREX’S liability shall be
limited to repair or replacement of the component found defective and shall not include any
liability for consequential or other damages. The customer is responsible for all freight charges
and taxes due on shipments both ways. This warranty is exclusive of all other warranties
express or implied.
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
iv Release History
Release History
Rev
Date
Revision History
Prepared by
Approved by
0
May 2008
First Release
Ian Buchanan
Eric Zinn
1
September 2008
Second Release
Ian Buchanan
Eric Zinn
2
July 2010
Third Release
Ian Buchanan
Eric Zinn
3
August 2010
Fourth Release
Ian Buchanan
Eric Zinn
4
November 2010
Fifth Release
Ian Buchanan
Eric Zinn
5
February 2013
Sixth Release
Ian Buchanan
Eric Zinn
6
July 2013
Seventh Release
Ian Buchanan
Eric Zinn
7
February 2015
Eighth Release
Ian Buchanan
Eric Zinn
8
June 2015
Ninth Release
Ian Buchanan
Eric Zinn
9
August 2015
Tenth Release
Ian Buchanan
Eric Zinn
10
January 2016
Eleventh Release
Ian Buchanan
Eric Zinn
11
July 2016
Twelfth Release
Ian Buchanan
Eric Zinn
12
October 2016
Thirteenth Release
Jay Cooley
Ian Buchanan
13
January 2017
Fourteenth Release
Jay Cooley
Ian Buchanan
14
February 2017
Fifteenth Release
Jay Cooley
Ian Buchanan
www.acornfiresecurity.com
www.acornfiresecurity.com

Table of Contents v
Table of Contents
Model 40/40I Triple IR (IR3) Flame Detector .................................................. i
Legal Notice....................................................................................................iii
Warranty........................................................................................................iii
Release History ...............................................................................................iv
About this Guide ............................................................................................10
Abbreviations and Acronyms............................................................................11
1Introduction ............................................................................................ 13
1.1 Overview .............................................................................................13
1.2 Model and Types...................................................................................14
1.3 Features and Benefits............................................................................17
1.4 Principles of Operation...........................................................................17
1.4.1 Hydrocarbon Fire Detection..............................................................18
1.4.2 Heated Optics.................................................................................18
1.4.3 HART Protocol ................................................................................18
1.4.4 RS-485 Modbus ..............................................................................19
1.4.5 Product Certification........................................................................19
1.5 Performance Considerations ...................................................................21
1.5.1 Detection Sensitivity .......................................................................21
1.5.2 Cone of Vision ................................................................................23
1.5.3 False Alarm Prevention ....................................................................24
1.5.4 Visual Indicators.............................................................................25
1.5.5 Output Signals................................................................................26
1.5.6 Detector Status ..............................................................................27
1.5.7 Auxiliary Relay as End-of-Line ..........................................................28
1.6 Internal Detector Tests..........................................................................28
1.6.1 Continuous Feature Test ..................................................................28
1.6.2 Built-In-Test (BIT) ..........................................................................29
2Installing the Detector ............................................................................ 33
2.1 General Guidelines................................................................................33
2.2 Unpacking the Product...........................................................................34
2.2.1 Checking the Product Type...............................................................34
2.3 Required Tools......................................................................................35
2.4 Certification Instructions........................................................................35
2.4.1 Special Instructions for Safe Use.......................................................35
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
vi Table of Contents
2.4.2 General Instructions........................................................................36
2.5 Installation Cables ................................................................................37
2.5.1 Conduit Installation.........................................................................37
2.6Installing the Tilt Mount.........................................................................38
2.6.1 Tilt Mount Assembly........................................................................39
2.7 Connecting the Detector ........................................................................40
2.7.1 Verifying the Detector Wiring ...........................................................41
2.8 Configuring Your Detector......................................................................43
2.8.1 Sensitivity......................................................................................44
2.8.2 Alarm Delay ...................................................................................44
2.8.3 Address Setup................................................................................44
2.8.4 Function Setup ...............................................................................45
2.8.5 Heated Optics.................................................................................45
3Operating the Detector ............................................................................ 47
3.1 Powering Up.........................................................................................47
3.2 Safety Precautions ................................................................................48
3.2.1 Default Functions Settings ...............................................................48
3.3 Testing Procedures................................................................................49
3.3.1 Automatic BIT Test .........................................................................49
3.3.2 Manual BIT Test..............................................................................49
3.3.3 Testing with Flame Simulator Model FS-1100 .....................................49
4Maintenance and Troubleshooting ........................................................... 51
4.1 Maintenance.........................................................................................51
4.1.1 General Procedures.........................................................................51
4.1.2 Periodic Procedures.........................................................................52
4.1.3 Keeping Maintenance Records ..........................................................52
4.2 Troubleshooting....................................................................................53
Appendix ....................................................................................................... 55
ASpecifications .......................................................................................... 57
A.1 Technical Specifications .........................................................................57
A.2 Electrical Specifications..........................................................................58
A.3 Outputs ...............................................................................................59
A.4 Approvals.............................................................................................61
A.5 Mechanical Specifications.......................................................................61
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
Table of Contents vii
A.6 Environmental Specifications..................................................................62
BWiring Instructions.................................................................................. 65
B.1 General Instructions for Electrical Wiring..................................................65
B.2 Typical Wiring Configurations .................................................................67
CRS-485 Communication Network ............................................................. 71
C.1 RS-485 Overview..................................................................................71
DAccessories.............................................................................................. 73
D.1 Flame Simulator FS-1100.......................................................................73
D.1.1 Ordering Information.......................................................................74
D.1.2 Unpacking......................................................................................74
D.1.3 Operating Instructions.....................................................................74
D.1.4 Range ...........................................................................................75
D.1.5 Charging the Battery.......................................................................75
D.1.6 Battery Replacement.......................................................................76
D.1.7 Technical Specifications ...................................................................77
D.2 Tilt Mount ............................................................................................78
D.3 Duct Mount ..........................................................................................79
D.4 Weather Cover .....................................................................................80
D.5 Cone Viewer.........................................................................................81
D.6 Air Shield.............................................................................................82
ESIL-2 Features ......................................................................................... 83
E.1 40/40I Flame Detector ..........................................................................83
E.1.1 Safety Relevant Parameters .............................................................83
E.1.2 Guidelines for Configuring, Installing, Operating, and Service...............83
Technical Support...........................................................................................88
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
viii List of Figures
List of Figures
Figure 1: Horizontal Field of View........................................................................23
Figure 2: Vertical Field of View............................................................................23
Figure 3: Indicator LED......................................................................................25
Figure 4: Detector with Tilt Mount .......................................................................38
Figure 5: Tilt Mount Assembly.............................................................................39
Figure 6: Tilt Mount Assembly (dimensions in millimeters and inches) .....................39
Figure 7: Detector with Cover Removed...............................................................41
Figure 8: Wiring Terminals .................................................................................67
Figure 9: Typical Wiring for 4 Wire Controllers (Using Option 1 or 2 Wiring) .............68
Figure 10: 0–20mA Wiring Option 1 (Sink 4-Wire) –Default...................................69
Figure 11: 0–20mA Wiring Option 1 (Converted to Source 3-Wire)..........................69
Figure 12: 0–20mA Wiring Option 1 (Non-isolated Sink 3-Wire)..............................70
Figure 13: 0–20mA Wiring Options 2 and 3 (Source 3-Wire available with the HART
Protocol)..........................................................................................................70
Figure 14: RS-485 Networking............................................................................71
Figure 15: Flame Simulator FS-1100 ...................................................................73
Figure 16: Flame Simulator Battery Replacement..................................................75
Figure 17: Tilt Mount .........................................................................................78
Figure 18: Duct Mount .......................................................................................79
Figure 19: Weather Cover ..................................................................................80
Figure 20: Cone Viewer......................................................................................81
Figure 21: Air Shield..........................................................................................82
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
List of Tables ix
List of Tables
Table 1: Wiring Options .....................................................................................16
Table 2: Sensitivity Range Levels ........................................................................22
Table 3: Fuel Sensitivity Ranges..........................................................................22
Table 4: Immunity to False Alarm Sources ...........................................................24
Table 5: Welding Immunity Distance ...................................................................25
Table 6: LED Indications ....................................................................................25
Table 7: Available Output Types..........................................................................26
Table 8: Detector Status ....................................................................................27
Table 9: Output Signals Versus Detector State......................................................27
Table 10: Results of a Successful BIT...................................................................30
Table 11: Results of an Unsuccessful BIT .............................................................30
Table 12: Results of a Successful Manual BIT........................................................31
Table 13: Results of an Unsuccessful Manual BIT ..................................................31
Table 14: Tools.................................................................................................35
Table 15: Model 40/40I Wiring Options................................................................42
Table 16: Sensitivity Settings .............................................................................44
Table 17: Functions...........................................................................................45
Table 18: Default Function Values .......................................................................48
Table 19: Results of Successful Flame Simulator Test ............................................50
Table 20: Troubleshooting Table .........................................................................53
Table 21: Electrical Specifications........................................................................58
Table 22: Contact Ratings ..................................................................................59
Table 23: 20mA Current Output..........................................................................60
Table 24: Electromagnetic Compatibility (EMC).....................................................63
Table 25: Maximum DC Resistance at 68°F/20ºC for Copper Wire ...........................65
Table 26: Wiring Length in Feet/Meters................................................................66
Table 27: Wiring Connections .............................................................................68
Table 28: Sensitivity Ranges...............................................................................75
Table 29: Immunity Tests ..................................................................................77
Table 30: Emission Tests....................................................................................77
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
10 About this Guide
About this Guide
This guide describes the SharpEye Model 40/40I Triple IR (IR3) Flame
Detector and its features and provides instructions on how to install,
operate, and maintain the detector.
This guide includes the following chapters and appendices:
Chapter 1, Introduction, provides a general overview of the product,
principles of operation, and performance considerations.
Chapter 2, Installing the Detector, describes how to install the
detector, including preparations before installation, wiring, and mode
settings.
Chapter 3, Operating the Detector, describes how to power up and
test the detector. The chapter also lists safety precautions you should
take when operating the detector.
Chapter 4, Maintenance and Troubleshooting, describes basic
maintenance, troubleshooting, and support procedures.
Appendix A, Technical Specifications, lists the detectors’technical
and other specifications.
Appendix B, Wiring Instructions, lists the wiring instructions for
connecting the detector and also provides examples of typical wiring
configurations.
Appendix C, RS-485 Communication Network, provides an overview
of the RS-485 communications network.
Appendix D, Accessories, describes the accessories available for the
detector.
Appendix E, SIL-2 Features, describes the special conditions for
compliance with EN 61508 for SIL-2 requirements according to TÜV.
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
Abbreviations and Acronyms 11
Abbreviations and Acronyms
Abbreviation
Meaning
ATEX
Atmosphere Explosives
AWG
American Wire Gauge
BIT
Built-In-Test
EMC
Electromagnetic Compatibility
EOL
End of Line
FOV
Field of View
HART
Highway Addressable Remote Transducer-
communication protocol
IAD
Immune at Any Distance
IECEx
International Electrotechnical Commission Explosion
IPA
Isopropyl Alcohol
IR
Infrared
JP5
Jet Fuel
Latched
Refers to relays remaining in the On state even after the
On condition has been removed
LED
Light Emitting Diode
LPG
Liquefied Petroleum Gas
mA
Milliamps (0.001 amps)
MODBUS
Master-slave messaging structure
N.C.
Normally Closed
N.O.
Normally Open
N/A
Not Applicable
NFPA
National Fire Protection Association
NPT
National Pipe Thread
SIL
Safety Integrity Level
UNC
Unified Coarse Thread
VAC
Volts Alternating Current
www.acornfiresecurity.com
www.acornfiresecurity.com

www.acornfiresecurity.com
www.acornfiresecurity.com

Overview 13
1 Introduction
➣In this chapter…
Overview
page 13
Model and Types
page 14
Features and Benefits
page 17
Principles of Operation
page 17
Performance Considerations
page 21
Internal Detector Tests
page 28
1.1 Overview
The SharpEye 40/40I is a flame detector that utilizes improved IR3
technology to provide state-of-the-art fire protection. The 40/40I uses
patented digital signal processing to analyze the spectral and dynamic
characteristics of the measured infrared radiation, to identify fire events
with exceptional sensitivity and extreme immunity to false alarms.
All 40/40 series detectors include a heated optical window for improved
performance in ice, snow, and condensation conditions.
Detection performance can be easily adapted to all environments,
applications, and requirements, by changing the detector’s configuration
parameters. Adjusting these parameters, as well as performing other
maintenance and monitoring tasks, is possible by means of RS-485-based
Modbus communication or HART communication (in models with 0–20mA
output).
The detector enclosure is ATEX certified Exd flameproof with an integral,
segregated, rear, Exe terminal compartment (avoiding exposure of the
sensors and electronics to the surrounding environment). Hence the
combined approval:
Ex II 2G D
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T96°C Db
(–55°C ≤ Ta ≤ +75°C)
or
Ex II 2G D
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T106°C Db
(–55°C ≤ Ta ≤ +85°C)
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
14 Model and Types
The SharpEye 40/40 detector is designed to operate as a stand-alone unit
directly connected to an alarm system or an automatic fire extinguishing
system. The detector can also be a part of a more complex system, where
many detectors and other devices are integrated through a common control
unit.
1.2 Model and Types
The 40/40I Flame Detector is provided in various configurations depending
on:
Wiring options
Temperature ranges
Type of cable entries
Housing material type
Required approval
The configuration detail is included in the product part number on the
product label and takes the form: 40/40I-XXXXX, where XXXXX defines the
model according to the above requirements.
To modify the default or pre-ordered configuration and perform maintenance
tasks, please refer to the HART Protocol TM777030, the RS-485 Manual TM
777050 or TM777070.
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
Model and Types 15
The Part Numbers are defined as:
Note:
*Aluminum housing is not available in the FM version.
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
16 Model and Types
Table 1 describes the wiring options in detail.
Table 1: Wiring Options
Wiring
Option
Connections Provided
1
Power
Manual
BIT
Fault
Relay
N.C.
Alarm
Relay
N.O.
0–20mA
Sink
RS-485
HART
2
Power
Manual
BIT
Fault
Relay
N.C.
Alarm
Relay
N.O.,
N.C.
0–20mA
Source
RS-485
HART
3
Power
Manual
BIT
Fault
Relay
N.O.
Alarm
Relay
N.O.,
N.C.
0–20mA
Source
RS-485
HART
4
Power
Manual
BIT
Fault
Relay
N.C.
Alarm
Relay
N.O.
Auxiliary
N.O.
RS-485
-
5
Power
Manual
BIT
Fault
Relay
N.O.
Alarm
Relay
N.O.
Auxiliary
N.O.
RS-485
-
Note: Wiring option 1 is the default. The mA “Sink”output can be altered to
“Source”type, with a link between terminals 1 and 8. No other wiring
options can be changed onsite.
For example, product number 40/40I-321SC has the following options:
Wiring Option: 3 (Power, Manual BIT, RS-485, 0–20mA [Source] with
the HART protocol, Fault Relay [N.O.], Alarm Relay [N.O., N.C.])
Temperature Range: 2 (85°C)
Cable Entry: 1 (M25)
Housing: S (Stainless Steel)
Approval: C (ATEX, IECEx)
Note: Check your specific part numbers against the information in Checking
the Product Type on page 34.
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
Principles of Operation 17
1.3 Features and Benefits
Detection Range: Up to 215ft/65m for a 1ft2/0.1m2n-heptane fire.
Ultra High Immunity to False Alarms: See Table 4 on page 24.
Advanced Digital Processing of the Dynamic Characteristics of Fire:
Flickering, threshold correlation and ratio.
Multi IR Channels: Between 2–5µm.
Field Programmable Sensitivity: 4 ranges to avoid zone crossover.
Built-In-Test (BIT): Manual and Automatic (see Built-In-Test (BIT) on
page 29).
Heated Window: Prevents effects of ice, snow, and condensation.
Electrical Interface:
Dry contact relays
Communication network RS-485
0–20mA output
HART Protocol: Communication protocol (see HART Protocol on page 18).
Exde: Integral junction box for easy wiring.
SIL-2: TÜV approved.
Hazardous Area Certification: ATEX, IECEx, FM, CSA.
Functionality Approval:
EN54-10 approved by VdS
FM approved per FM3260
Accessories are approved as part of ATEX and IECEx approval.
1.4 Principles of Operation
This section describes the 40/40I principles of operation and includes:
Hydrocarbon Fire Detection, page 18
Heated Optics, page 18
HART Protocol, page 18
RS-485 Modbus, page 19
Product Certification, page 19
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
18 Principles of Operation
1.4.1 Hydrocarbon Fire Detection
The SharpEye 40/40I Detector is designed to detect flames in which carbon
dioxide (CO2) is produced in the combustion process. These include all
hydrocarbon flames, as well as other types of flames and burning materials
such as wood or alcohol.
The detector’s principle of operation is based on patented IR3 technology.
This technology identifies the unique spectral signature that hot CO2has in
the infrared (IR), i.e. a peak of intensity at wavelengths of 4.2–4.7µm.
The original IR3 technique (such as implemented in the SharpEye 20/20I
Flame Detector) utilizes 3 infrared sensors, each sensitive to its own
wavelength range. The first sensor is sensitive to wavelengths within the
emission peak of hot CO2. The other 2 sensors are sensitive to wavelengths
above and below this peak. In the event of fire, the signal measured in the
first sensor is significantly higher than those measured in the other 2
sensors. In order to trigger a fire alarm, these and other conditions must be
met (for example, radiation is flickering in frequencies typical of flames).
The detector does not react when exposed to non-fire radiation sources.
The SharpEye 40/40I also includes an additional IR sensor, sensitive to a
different band within the emission peak of hot CO2. This sensor’s signal is
compared to those of the other 3, thereby increasing sensitivity for some
types of flames, such as gas flames.
1.4.2 Heated Optics
The SharpEye 40/40 Flame Detector uses heated optics. The heater
increases the temperature of the optical surface by 5–8°F / ~3–5°C above
the ambient temperature to improve performance in ice, condensation, and
snow conditions.
The heated optics can be set to one of the following:
Not operated.
On continuously.
Automatic, per temperature change (default): you can define the start
temperature below which the window is heated. (The default is
41°F/5°C.) This temperature can be defined from 32°F/0°C to
86°F/30°C. The heating stops when the temperature is 27°F/15°C above
the start temperature.
For more information, see Configuring Your Detector on page 43.
1.4.3 HART Protocol
The 40/40 Flame Detectors use the HART protocol.
HART Communication is a bi-directional industrial field communication
protocol used to communicate between intelligent field instruments and host
systems. HART is the global standard for smart process instrumentation and
the majority of smart field devices installed in plants worldwide are HART-
enabled. HART is available in wiring options 1, 2, and 3 (see Table 1, page
16).
www.acornfiresecurity.com
www.acornfiresecurity.com

TM 40/40I, Rev (14) February 2017
Principles of Operation 19
HART technology is easy to use and very reliable.
Through the HART connection, you are able to perform:
Detector setup
Detector troubleshooting
Detector health and status
For more details, refer to the HART Manual TM 777030.
1.4.4 RS-485 Modbus
For more advanced communications, the 40/40I detector has an RS 485
Modbus-compatible output that provides data communication from a
network (up to 247 detectors) to a host computer or universal controller for
central monitoring. This feature allows for reduced installation costs, easy
maintenance, and local or remote diagnostic tools.
1.4.5 Product Certification
The 40/40I Flame Detectors have the following certifications:
ATEX, IECEx, page 19
FM, CSA, page 20
SIL-2 , page 20
EN54-10, page 20
Inmetro (UL), page 20
TR CU/EAC, page 8
1.4.5.1 ATEX, IECEx
The 40/40I Flame Detector is certified to:
ATEX per SIRA 07ATEX1250X and IECEx per IECEx SIR 07.0085X
Ex II 2G D
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T96°C Db
(–55°C ≤ Ta ≤ +75°C)
or
Ex II 2G D
Ex db eb op is IIC T4 Gb
Ex tb op is IIIC T106°C Db
(–55°C ≤ Ta ≤ +85°C)
The accessories, Tilt Mount P/N 40/40-001, Weather Cover P/N 777163 and
P/N 777268, Duct Mount P/N 777670 and Air Shield P/N 777650 are
included in the approval.
This product is suitable for use in hazardous zones 1 and 2 with IIC gas
group vapors present, and zones 21 and 22 with IIIC dust type present.
www.acornfiresecurity.com
www.acornfiresecurity.com

SharpEyeTM IR3 Flame Detector User Guide
20 Principles of Operation
1.4.5.2 FM, CSA
The 40/40I Flame Detector is certified for FM and CSA Explosion Proof and
Functionality per FM3260:
Class I, Division 1, Groups B, C, and D.
Dust Ignition Proof –Class II/III Division 1, Groups E, F, and G.
Ingress Protection –IP67, IP66, NEMA 250 Type 6P.
Fuel Test Response including: Gasoline, N-Heptane, Diesel, JP5,
Kerosene, Ethyl, Alcohol 95%, IPA, Methanol, Methane, LPG,
Polypropylene, and Paper.
For more details see FM Report Project ID3029553, and CSA Report No.
2451134.
1.4.5.3 SIL-2
The 40/40I Flame Detector is certified for the SIL-2 requirement per IEC
61508.4, Chapter 3.5.12.
The alert condition according to SIL-2 can be implemented by:
Alert signal via 0–20mA current loop.
or
Alert signal via alarm relay and fault relay.
For more details and guidelines for configuring, installing, operating, and
service, see SIL-2 Features on page 83 and TÜV Report No. 968/EZ
348.04/16.
1.4.5.4 EN54-10
The 40/40I Flame Detector is certified to EN54-10 and CPD.
The detector has been tested and approved per EN54-10 by VdS.
This test includes a functional test, environmental test, EMI/EMC test,
and software check.
For more details see VdS Report No. BMA 12118.
1.4.5.5 Inmetro (UL)
The 40/40I Flame Detector is in compliance with the standards ABNT NBR
IEC 60079-0, ABNT NBR IEC 60079-1, ABNT NBR IEC 60079-7, ABNT NBR
IEC 60079-18, ABNT NBR IEC 60079-31, and INMETRO decree No. 179 as of
May 18th, 2010. Further details may be found on Certificate of Compliance
No. UL-BR 16.065XX.
www.acornfiresecurity.com
www.acornfiresecurity.com