SpeedyBee Bee 35 User manual

 
1

M2.5 (8mm) button head hex socket screw
M2.5 (20mm) aluminum stando
M2 (6mm) button head hex
socket screw
CNC head pa installation
1
2
Antenna Installation Sequence
inse the O-ring into the antenna to
secure it on the TPU antenna base.
2

Motor installing hole distance: 12*12mm
M2 (6mm) screws are recommended
30.5*30.5 ight controller mounting holes
20*20 ight controller mounting holes
25.5*25.5 AIO ight controller mounting holes
FC Mounting Hole | Motor Mounting Hole
3

*(Note: Assembly diagram, motor not included
in the frame)
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
1�1 Scale
Recommended cable length for 25.5 AIO: 52mm
Recommended cable length for 20mm MINI: 62mm
ESC
4

Select the corresponding
inteace to connect to the FC Micro USB
Tpye-C
Multi-function Antenna Mount
M3 (15mm) aluminum stando
Adjustable GPS Mount (12*16mm)
TYPE-C Module
Self-tapping Screw M2.5 (6mm)
SMA antenna installation position.
*(注：装配示意图，机架不包含天线）
(*Note: pictures for assembly reference only.
Frame doesn’t include antenna)
5

Install the video transmitter into the
aluminum bracket (pay attention to
the orientation), and then secure it
with the TPU video transmitter mount.
CNC cooling pa installation
2
3
1First, install the aluminum
alloy at the bottom position.
Install the video transmitter
antenna into the TPU antenna mount.
6
2
Note: BEE35 comes with a carbon ber base plate, while BEE35 PRO comes with an
aluminum alloy heat sink base plate.

Suggesting place for main power cable
It is recommended to keep the power cable of ESC to be about 100mm.
Please refer to your own batte for actual length.
7

M2 (6mm) button head hex socket screw
O3 Air Unit or RunCam Link installation
O3 Air Unit或RunCam Link
M2 (3mm) button head hex socket screw
CNC cooling pa installation
8
M3 (14mm) button head
hex socket screw

M3 (14mm) button head
hex socket screw
Bottom screw installation
9

Installation Illustration
M3 (9mm) at hex socket screw
M3 (10mm) button head
hex socket screw
M3 (14mm) button head
hex socket screw
M3 (8mm) button head
hex socket screw
M3 (7mm) at hex socket screw
10

M2 (7mm) button head hex socket screw
T-antenna installation
M2(6mm)
11

M3 nut
M3 (20mm) button head hex socket screw
M3 (10mm) button head hex
socket screw
M3 (8mm) button head hex socket screw
Detachable anti-vibration camera base mount
Note: This accesso needs to be purchased separately
12