Sper scientific 800012 User manual

RH/Temperature Pen
800012
Instruction Manual
FIVE YEAR WARRANTY
Sper Scientific warrants this product
against defects in materials and workman-
ship for a period of five years from the date
of purchase, and agrees to repair or
replace any defective unit without charge. If
your model has since been discontinued,
an equivalent Sper Scientific product will be
substituted if available. This warranty does
not cover damage resulting from accident,
misuse, or abuse of the product. In order to
obtain warranty service, simply ship the unit
postage prepaid to:
SPER SCIENTIFIC LTD.
7720 East Redfield, Suite 7
Scottsdale, Arizona 85260
[phone]
www.sperscientific.com
Please Note: The defective unit must be
accompanied by a description of the
problem and your return address. Be sure
to register your product online or return
your warranty card within 10 days of
purchase.
Rev. 2/26/2010
- 8 -

RH/ Temperature Pen 800012
Copyright ©2009 by Sper Scientific
ALL RIGHTS RESERVED
Printed in the USA
7720 E. Redfield Rd. Suite #7, Scottsdale, AZ 85260
Tel: [phone] Fax: [phone]
Web: www.sperscientific.com
The contents of this manual may not be
reproduced or transmitted in any form or
by any means electronic, mechanical, or
other means that do not yet exist or may
be developed, including photocopying,
recording, or any information storage
and retrieval system without the express
permission from Sper Scientific.
- 2 - - 7 -

MEASUREMENT PROCEDURES
1. Press Afor 3 seconds to turn the
meter on or off.
2. The meter will turn off automatically
after 10 minutes of inactivity.
3. To view the ∆(difference)
measurement, press Afor 0.5 second.
The unit will start at zero and then
display the ∆reading.
4. Press A for 0.5 second to return to
Normal Mode.
Minimum/Maximum Modes
1. To change mode, press B for 0.5
second to cycle through Max, Min and
Normal Modes, respectively.
2. In Min and Max Modes only, press A
to reset memory.
3. Wait 10 seconds and the unit will
automatically return to Normal Mode.
A B
SPECIFICATIONS
High Poly (Sensor) Response Time: 30 ~ 90%: 120 seconds
90 ~ 30%: 150 seconds
Measurement and Display Range:
Humidity: 20~95% RH Temp: -20~60°C (-4~140°F)
Accuracy: Humidity: 30 to 80% ± 3%, otherwise ±5% RH
Temp: ± 1°C (±2°F)
Battery: 1 AAA Battery Operating Temperature: 0 to 40°C (<90% RH) Storage Temperature: -10 to 60°C (<70% RH) Dimensions: 14.2 x 160.0mm Weight: 1.7oz (50g)
- 6 - - 3 -

MEASUREMENT PROCEDURES
4. The Max and Min data will be
reset when the unit is turned off.
Changing Temperature Scale
1. To switch from °C to °F or vice
versa, use a pointed tool (such as
a disassembled paper clip) to
poke straight (perpendicular to the
unit, not at an angle) into the
small hole located on the back of
the unit.
2. Press in (you will feel a button
push down inside the unit) until
the LCD display switches from °C
to °F or vice versa.
BATTERY REPLACEMENT
1. Turn the unit off by pressing Afor 3 se-
conds.
2. Twist off the battery cover and replace with
one AAA 1.5V battery ensuring correct
polarity.
- 4 - - 5 -