Sportline 480 User manual

480
Tough Timer
Stopwatch
©2008 EB Sport Group#4413
GUARANTEE CERTIFICATE
For purchases made in the U.S.
If at any time within one (1) year from the purchase date of this
product, it fails to perform properly because of defects in material
or manufacturing, return it prepaid to:
EB SPORT GROUP, 585 Oak Ridge Road, Hazleton, PA 18202
Complete this Guarantee Certicate and enclose it
(or a copy of it) with the product.
(PLEASE PRINT CLEARLY)
NAME TEL
ADDRESS
CITY
STATE ZIP
STORE PURCHASED FROM
DATE OF PURCHASE PURCHASE PRICE
PROBLEM WITH PRODUCT
REPLACEMENT
This product has been carefully designed, manufactured and
packaged. If any parts are missing or damaged, please contact
us at the address above and we will replace the unit at no
charge. (Guarantee does not cover crystal or battery.)
For purchases made in the UK:
Should you experience problems with this item, please return
it to the point of purchase. This will not aect your statutory
rights. Alternatively return it to the address shown below for a
repair/replacement: StarCase (UK) Ltd, Berkeley Business Park,
Wainwright Road, Worcester WR4 9FA
www.sportline.com
Sportline® is a trademark of SPORTLINE, a division
of E & B Exercise, LLC, Yonkers, NY 10701
Distributed in the UK by
StarCase (UK) Ltd., Worcester, WR4 9FA
All Rights Reserved. ©2008
WV4413IS01SPT
OPERATING INSTRUCTIONS
1. Remove the plastic lm from the LCD display on the front of the
stopwatch.
2. Slowly pull the battery protector tab out from the battery door
located on the back to activate.
IMPORTANT: READ THROUGH ALL INSTRUCTIONS BEFORE
BEGINNING TO USE YOUR STOPWATCH
FEATURES
• Time/Calendar Display
• Hour (12-24 Hour format), minute,
second, year, month, date and day
• Stopwatch: Times to 1/100 second
for 40 minutes, 1 second to
40 hours after the rst 40 minutes
• Tally Counter: Counts up to 3999
• Electroluminescent Backlight
MAIN FUNCTION BUTTONS
A— Mode Button
Switch between normal time mode, stopwatch mode and tally
counter mode and time setting mode.
B— Start/Stop Button
Used to start and stop the stopwatch function
Also for value setting when in time setting mode
Used to display the calendar screen.
Used in combination with the Split/Reset Button to clear the tally
counter
C— Split/Reset Button
Used to split times in stopwatch mode
Clear timing records in stopwatch mode
Select time/calendar segment to be set in time setting mode
Used to advance 1 count in tally counting mode.
Used in combination with the Start/Stop Button to clear the tally
counter
D—Light
Used to turn on the electroluminescent backlight
DISPLAY SYMBOLS
NORMAL TIME MODE
1. Day of the Week
2. Hour
3. Minute
4. Second
CALENDAR DISPLAY
1. Day of the Week
2. Month
3. Date
4. Year
TALLY COUNTER MODE
1. Press Atwo times (from normal time mode) to get to tally
counting mode.
2. The tally counter symbol will appear on the display in the
upper right hand side of the display with a ‘0”.
3. Press either Bor Cto count. Each press will advance the
counter in values of 1.
4. To clear the count, press Band Csimultaneously.
EL BACKLIGHT
To turn on the backlight simply press the light button (D)
Note: The light will remain on for about 5 seconds each time it is
pressed. Please note that the more the light is used, the more
drain it will put on the battery shortening the lifetime of the
battery.
CALENDAR
To see the calendar display (month/date/year), press Band hold
while in normal time mode.
STOPWATCH MODE BASIC FUNCTION
Press Ato until you reach Stopwatch Mode.
Press Bto activate the Stopwatch to count
Press Cto reset the stopwatch to "0:00:00" before using the
stopwatch.
1. Accumulate elapsed time measurement: B-B-B-B-C
2. Split time measurement: B-C-C-B-C
3. Measurement between two competitors: B-C-B-C-C
Press Ato return to the normal time mode.
TIME/CALENDAR SETTING
1. Press Athree times (from normal time mode) to reach time
setting mode. The seconds and day of the week bar will ash to
let you know you are time setting mode.
2. Press Cto select the time/calendar segment to be set. The
sequence will be: minute > hour > year > month > date >
seconds. (Seconds will reset to 00). The day of the week will
automatically be set when the year, month and date are set.
3. Press Bto increase the setting value and change 12/24-hour
format when setting the hour.
4. Press Ato return to the normal mode.
BATTERY REPLACEMENT
When the LCD becomes dim, replace with a new type CR2032, 3
Volt battery.
To replace battery, open battery compartment door with a coin
and remove the door. Replace with a fresh CR2032 battery
making sure to observe the correct +/- polarity. Replace the
battery compartment door and close securely by twisting into
place with a coin. The triangle on the battery door should align
with the triangle on the red rim at the top to ensure the battery
door is properly closed.
CAUTION – Battery Safety Information
• Non-rechargeable batteries are not to be recharged
• Rechargeable batteries must be removed before recharging
• Rechargeable batteries only to be recharged under adult
supervision
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries
• Do not mix old and new batteries
• Exhausted batteries to be removed
• Do not dispose of battery in re; battery may explode or leak
• Do not dispose of product in re; battery may explode or leak
0:0000
- - - - - - -
0:0000
- - - - - - -
20:0008
- - - - - - -
0:1000 0:1808
- - - - - - - - - - - - - -
Start Stop Restart
Reset Stop
0:0000
- - - - - - -
0:0000
- - - - - - -
2:1012
- - - - - - -
26:1321 29:2145
- - - - - - - - - - - - - -
Start Split Split/release
Reset Stop
TOUGH TIMER
WATERRESISTANT
SUMO TU WE TH FR SA
D
A
B
C
AM 5:30 36
1
24
3
-
6:2608
1
24
3
-
0:0000
- - - - - - -
0:0000
- - - - - - -
0:1528
- - - - - - -
0:1208 0:1208
- - - - - - - - - - - - - -
Start Split Stop
Reset Split/release
AM
000
DATE
AM AM
10:09 36
2 8 DATE
2 8 DATE 2 8
10:09 36 10:09 A
Second Minute Hour
MonthDate Yea r