Spraying Systems TeeJet Technologies AEROS 9040 Manual

USER SETTINGS
118
98-01547-EN R4
AEROS 9040
SETUP OPTIONS FOR SOFTWARE v4.41
To make a suggestion, unselect the Use Default checkmark.
HOME> JOB
Current Name Notes
TABLE OF CONTENTS
HOME> JOB ..........................................................................119
CONFIGURATION SETTINGS..............................................120
Implement...................................................................................120
Multiple Section Output Modules ..................................121
Straight Mode...............................................................121
Spreader Mode – TeeJet ..............................................122
Spreader Mode – OEM.................................................123
Staggered Mode...........................................................124
Mapping and Guidance..........................................................126
GNSS Receiver Conguration ...............................................127
Video..............................................................................................128
Sensors-> IOM Pressure Sensor ...........................................128
Tip Flow Monitor .......................................................................129
ISOBUS ..........................................................................................130
Product .........................................................................................130
AutoSteer with FieldPilot Pro or UniPilot Pro..................130
Manage Vehicles..........................................................130
Select QI Values...........................................................132
AutoSteer .....................................................................................132
Tilt Correction.............................................................................133
DATA MANAGEMENT...........................................................133
Joba Data .....................................................................................133
Options .........................................................................................133
Machine Settings ......................................................................133
CONSOLE SETTINGS ............................................................134
GUIDANCE SETTINGS..........................................................134
Guidance Bar ..............................................................................134
Guidelines....................................................................135
Boundaries & Polygons ................................................135

119
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
CONFIGURATION SETTINGS
Implement
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
Machine Type Front Wheel Front Wheel,
Tracked,
Articulated
GNSS Antenna Height 12.5 ft. / 3.81 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Implement Type Straight Straight,
Spreader,
Staggered
Symmetric Implement Layout Enabled Enabled, Disabled
Number of Implement Sections 5 1 - 30
Application/Working Width 144 in. / 3.6576 m Single Section:
3.28 - 246.06 ft. /
1.0 - 75.0 m.
Multiple Sections:
Range for
each section is
0.0 - 246.06 ft. /
0.0 - 75.0 m.
Total for all
sections must
be greater than
3.28 ft. / 1.0 m.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26

120 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
27
28
29
30
Droplet Size Monitor Disabled Enabled, Disabled
Tip Selection-> Current Tip and Tip Presets --- #1
#2
#3
#4
#5
Tip Spacing 24 in. / 60.96 cm 0.39 - 2,952.76 in.
/ 1.0 - 7,500.0 cm
Applied Alert Disabled Enabled, Disabled
Entry Time 0.0 sec 0.0 - 10.0 sec
Exit Time 0.0 sec 0.0 - 10.0 sec
Allow BoomPilot In Reverse Enabled Enabled, Disabled
BoomPilot Start Mode Enabled Enabled, Disabled
BoomPilot Icon Enabled Enabled, Disabled
Reverse Signal Delay 0.0 sec 0.0 - 10.0 sec
Multiple Section Output Modules
Sections Module ID Notes
Straight Mode
Active Inactive
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Implement In-Line Offset Direction Backward Backward,
Forward
Implement In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Implement Lateral Offset Direction Left Left, Right
Implement Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Connection Point In-Line Offset Direction Backward Backward,
Forward

121
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Connection Point In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Connection Point Lateral Offset Direction Left Left, Right
Connection Point Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Overlap 100% 0%, 50%, 100%
Delay On Time 1.0 sec 0.0 - 10.0 sec
Delay Off Time 1.0 sec 0.0 - 10.0 sec
Spreader Mode – TeeJet
Active Inactive
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
Setup Type TeeJet TeeJet, OEM
Antenna to Disks In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Implement Lateral Offset Direction Left Left, Right
Implement Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Overlap 100% 0%, 50%, 100%
Delay On Time 0.0 sec 0.0 - 10.0 sec
Delay Off Time 0.0 sec 0.0 - 10.0 sec
Spread Offset Distance 0.0 ft. / 0.0 m 0.0 - 246.1 ft. /
0.0 - 75.0 m
Section Offsets 0.0 ft. / 0.0 m Section 1:
Always 0.0 ft. /
0.0 m
Sections 2-30:
0.0 - 246.1 ft. /
0.0 - 75.0 m
Offset Length
1 0.0
2
3
4
5
6
Spread Lengths 1.64 ft. / 0.5 m 1.64 - 246.1 ft. /
0.5 - 75.0 m
7
8
9
10
11
12
13
14
15

122 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Spreader Mode – OEM
Active Inactive
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
Setup Type TeeJet TeeJet, OEM
Antenna to Disks In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Implement Lateral Offset Direction Left Left, Right
Implement Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Start Distance 0.0 ft. / 0.0 m 0.0 - 246.1 ft. /
0.0 - 75.0 m
Stop Distance 0.0 ft. / 0.0 m 0.0 - 246.1 ft. /
0.0 - 75.0 m
Section Start/Stop Offsets 0.0 ft. / 0.0 m 0.0 - 246.1 ft. /
0.0 - 75.0 m Start Stop
1
2
3
4
5
6
7
8

123
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Staggered Mode
Active Inactive
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
Section 1 In-line Offset Direction Backward Backward,
Forward
Section 1 In-line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Implement Lateral Offset Direction Left Left, Right
Implement Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 32.8 ft. /
0.0 - 10.0 m
Overlap 100% 0%, 50%, 100%
Delay On Time 1.0 sec 0.0 - 10.0 sec
Delay Off Time 1.0 sec 0.0 - 10.0 sec

124 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
Section Offsets 0.0 ft. / 0.0 m Section 1:
Always 0.0 ft. /
0.0 m
Sections 2-30:
0.0 - 246.1 ft. /
0.0 - 75.0 m
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

125
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Mapping and Guidance
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Mapping Location Default Location Default Location,
User Entry 1-5
Location Name User Entry 1
Mapping Location In-Line Offset Direction Backward Backward,
Forward
User
Entry 1
Mapping Location In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Mapping Location Lateral Offset Direction Left Left, Right
Mapping Location Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Location Name User Entry 2
Mapping Location In-Line Offset Direction Backward Backward,
Forward
User
Entry 2
Mapping Location In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Mapping Location Lateral Offset Direction Left Left, Right
Mapping Location Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Location Name User Entry 3
Mapping Location In-Line Offset Direction Backward Backward,
Forward
User
Entry 3
Mapping Location In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Mapping Location Lateral Offset Direction Left Left, Right
Mapping Location Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Location Name User Entry 4
Mapping Location In-Line Offset Direction Backward Backward,
Forward
User
Entry 4
Mapping Location In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Mapping Location Lateral Offset Direction Left Left, Right
Mapping Location Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Location Name User Entry 5
Mapping Location In-Line Offset Direction Backward Backward,
Forward
User
Entry 5
Mapping Location In-Line Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Mapping Location Lateral Offset Direction Left Left, Right
Mapping Location Lateral Offset Distance 0.0 ft. / 0.0 m 0.0 - 164.0 ft. /
0.0 - 50.0 m
Guidance Width 60.0 ft. / 18.288 m 3.28 - 246.1 ft. /
1.0 - 75.0 m

126 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Guidance Sensitivity 1.50 ft. / 0.46 m 0.03 - 9.84 ft. /
0.01 - 3.0 m
Display Mode Swath Swath, Vehicle
LED Spacing 1.50 ft. / 0.46 m 0.03 - 9.84 ft. /
0.01 - 3.0 m
External Lightbar Enabled Enabled, Disabled
External Lightbar LED Brightness 25% 0% - 100%
External Lightbar Text Brightness 25% 0% - 100%
External Cross Track Enabled Enabled, Disabled
External Swath Number Disabled Enabled, Disabled
External Speed Disabled Enabled, Disabled
External Actual Rate Disabled Enabled, Disabled
External Target Rate Disabled Enabled, Disabled
External Applied Product Disabled Enabled, Disabled
GNSS Receiver Conguration
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
GNSS Type GPS, GLONASS GPS, GLONASS,
SBAS, DGPS
required
GNSS Port Internal Internal, External
GNSS Data Rate Fast (115,200 +
10 Hz)
Fast (115,200
+ 10 Hz), Slow
(19,200 + 5 Hz)
GNSS
Status
Infor-
mation
Baud Rate
Baud Rate Status
GGA Data Rates 10 Hz 0.0 Hz - 20.0 Hz
VTG Data Rates 10 Hz 0.0 Hz - 20.0 Hz
Number of Satellites
HDOP
PRN
GGA Quality
Receiver
Receiver Version
UTM Zone
Model
PRN Automatic Automatic,
Specic Number
Alternate PRN 120 Specic Number

127
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Show refresh GNSS position button Disabled Enabled, Disabled
Video
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Reverse Camera Disabled Enabled, Disabled
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Reverse Inactive Active, Inactive
Upside Down Inactive Active, Inactive
Sensors-> IOM Pressure Sensor
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Maximum Pressure Rating 145 psi / 10.0 bar 1.0 - 435 psi /
0.1 - 30.0 bar
Low Pressure Alarm 0.0 psi / bar 0.0 - 1450 psi /
0.0 - 100.0 bar
High Pressure Alarm 217.6 psi /
15.0 bar
0.0 - 1450 psi /
0.0 - 100.0 bar

128 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Tip Flow Monitor
Description Factory Default Range Suggested Setting
Use
Default Notes
Tip Alarm Percentage 10% 0% - 100%
Tip Alarm Delay 1 sec 1 - 10 sec
Number of Sections 1 1 - 30
Number of Tips per Section 10 0 - 120 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Tip Balance Percentage 15% 0% - 100%
Tip Flow Monitor Balance

129
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
ISOBUS
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Machine Speed Broadcast Enabled Enabled, Disabled
Navigation Speed Broadcast Enabled Enabled, Disabled
Ground Speed Broadcast Enabled Enabled, Disabled
Time/Date Broadcast Enabled Enabled, Disabled
Universal Terminal (UT) Number 1 1 -32
Task Controller (TC) Number
Number of UT Object Pools
Number of ISOBUS Control Functions
Product
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Product Name ---
Maximum Rate Color Dark Blue
Minimum Rate Color Light Blue
Color Range Automatic Automatic,
Manual
Applied Rate Mapping Upper Limit
Applied Rate Mapping Lower Limit
AutoSteer with FieldPilot Pro or UniPilot Pro
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Maximum DOP 3.0 0.0 - 10.0
Transport Mode Enabled Enabled, Disabled
Service Mode Enabled Enabled, Disabled
Operator Presence Enabled Enabled, Disabled
Manage Vehicles
Vehicle Name:
Vehicle Prole
New Edit
Description Range/Options
Suggested
Setting
Use
Default Notes
Vehicle Type Articulated, Combine, Floater, MFWD,
Sprayer, Swather, Track
Vehicle Make Manufacturer Specic, Generic
Vehicle Model Manufacturer Specic, Generic

130 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Range/Options
Suggested
Setting
Use
Default Notes
Controller Type Standard - Hydraulic, UniPilot Pro,
AccuGuide Ready, Auto-Guide2,
AutoTrac Ready, Vehicle - CAN,
IntelliSteer Ready, AutoTrac Ready ISO
Wheel Base 0.0 - 65.6 ft. / 0.0 - 20.0 m
Antenna In-line Offset Direction Backward, Forward
Antenna In-line Offset Distance 0.0 - 10.0 ft. / 0.0 - 3.048 m
Antenna Lateral Offset Direction Left, Right
Antenna Lateral Offset Distance 0.0 - 10.0 ft. / 0.0 - 3.048 m
Antenna Height 0.0 - 65.6 ft. / 0.0 - 20.0 m
SCM Pro In-line Offset Direction Backward, Forward
SCM Pro In-line Offset Distance 0.0 - 10.0 ft. / 0.0 - 3.048 m
SCM Pro Lateral Offset Direction Left, Right
SCM Pro Lateral Offset Distance 0.0 - 10.0 ft. / 0.0 - 3.048 m
SCM Pro Height 0.0 - 65.6 ft. / 0.0 - 20.0 m
Wheel Angle Sensor (WAS) None, Present
SCM Pro Orientation Orthogonal, Non-orthogonal
X Angle/Pitch 0-360 degrees
Y Angle/Roll 0-360 degrees
Z Angle/Yaw 0-360 degrees
Auto Calibration
Complete Not Complete
Description Notes
Compass Calibration
Wait for Heading
Tilt Zero Initial Direction
Tilt Zero Opposite Direction
Valve Deadband
Angle Sensor
Valve
UniPilot Pro Deadband
UniPilot Pro
Curvature
Vehicle Adjust
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Manual Disengage

131
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Motor Aggressiveness 10 1 - 20
UniPilot Pro Freeplay 0 1 - 20
Steering Response 10 1 - 20
Heading Aggressiveness 10 1 - 20
Cross Track Error 10 1 - 20
Line Acquisition 10 1 - 20
Reverse Response 10 1 - 20
Tilt Calibration
Wheel Angle Sensor (WAS) Calibration
Select QI Values
Description Factory Default Range/Options Suggested Setting
Use
Default Notes
QI Value Enabled Enabled, Disabled 1
2
3
4
5
AutoSteer
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Assisted/Auto Steering Enabled/Disabled Enabled Enabled, Disabled
Valve Setup
Valve Type Standard/PWM Standard/PWM,
Standard Voltage,
Reverse Voltage,
One-Wire PWM,
UniPilot
Valve Frequency 175 Hz 1 Hz - 15,000 Hz
Minimum Left Duty Cycle 20% 0.0% - 50.0%
Minimum Right Duty Cycle 20% 0.0% - 50.0%
Maximum Left Duty Cycle 50% 25.0% - 100.0%
Maximum Right Duty Cycle 50% 25.0% - 100.0%
Steering
Settings
Coarse Steering Adjustment 25 1.0 - 100.0
Fine Steering Adjustment 25 1.0 - 100.0
Deadband 9 0 - 9
Lookahead 4.0 sec 0.0 - 10.0 sec
Valve Test
Valve Diagnostics
Options -> Steering Wheel Sensor Disabled Enabled, Disabled

132 98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Steering Angle
Sensor
Enabled/Disabled Enabled Enabled, Disabled
Sensor Calibration
On Line Calibration
Tilt Correction
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Enabled/Disabled Disabled Enabled, Disabled
Field Level
DATA MANAGEMENT
Joba Data
Name Notes
Options
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Job Mode Advanced Advanced, Simple
Machine Settings
Name Notes

133
98-01547-EN R4
USER SETTINGS TEEJET TECHNOLOGIES
CONSOLE SETTINGS
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
About
Display
Color Scheme Style 1 Style 1: light gray,
Style 2: dark gray,
Style 3: light blue,
Style 4: green,
Style 5: red,
Style 6: white
LCD Brightness 50 1 - 100
Night Mode Disabled Enabled, Disabled
Screenshot Disabled Enabled, Disabled
Screen Calibration
Cultural
Units US US, Metric
Language English-US DE, EN, EN-US,
ES, FR, HU, IT,
LT, PL, PT-BR,
RU
Time Zone America - Denver (Too many to list)
Audio Volume 60 1 - 100
Demo GNSS Disabled Enabled, Disabled
Feature Unlock
BoomPilot for Spreader Disabled Enabled, Disabled
FieldPilot Pro / UniPilot Pro Disabled Enabled, Disabled
GUIDANCE SETTINGS
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Guidance Mode Straight AB No Guidance,
Straight AB,
Curved AB,
Circle Pivot, Last
Pass, NextRow,
Adaptive Curve
Curved Lookahead Disabled Enabled, Disabled
Guidance Bar
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Navigation Activity Cross Tract Error Decimal Feet [1.5]
/ Meters [1.5]
Decimal Feet
[1.5], Feet and
Inches [1′06″],
Inches [18] /
Meters [1.5],
Meters [1.50],
Centimeters [150]

98-01547-EN R4 English
© TeeJet Technologies 2019
www.teejet.com
USER SETTINGS
Description Factory Default Range/Options
Suggested
Setting
Use
Default Notes
Selectable Information - Left Side Speed Speed, Heading,
Total applied area,
Application time,
Selectable Information - Right Side Applied Area
Time, Swath number, System pressure, Droplet size, Actual application
rate, Target application rate, Volume/product applied, Tank/bin amount
remaining
Guidelines
Name Guideline Type Notes
Boundaries & Polygons
Name Boundary/Polygon Type Notes