Spypoint TINY-W2s User manual

SURVEILLANCE CAMERA
CAMÉRA DE SURVEILLANCE
ÜBERWACHUNGS KAMERA
TINY-W2s model / Modèle TINY-W2s /
Modell TINY-W2s
User manual / Manuel d'utilisation /
Bedienungsanleitung
www.spypoint.com

3
English
English
Thank you for choosing the SPYPOINT
TINY-W2s monitoring system. This manual will help you get
the most out of your new device. For the latest version of the
user manual or for additional information, visit our website at
www.spypoint.com.
v.1.3

45
English
English
FEATURES
Photo recording:
Photo resolution 8 MP
File format JPG
Time Lapse Predefined intervals from
30sec to 1h
Multi-shot Up to 6 pictures per detection
Stamp Date, time, temperature and
moon phase printed on photo
Capture mode Color by day, black and white
by night
Video recording:
Video resolution 640 x 480
File format AVI
Sequence length Adjustable from 10 to 90sec
Capture mode Color by day, black and white
by night
Sound recording: Automatically recorded in
video mode
Memory storage:
(Camera1/ Receiver2)
SD/SDHC card up to 32GB1 /
up to 8GB2(No internal memory)
Viewing:
Built-in screen 2.4" LCD
TV output Composite video (PAL/NTSC)
Computer output USB 2.0
Power supply (Camera):
(accessories sold separately, see OPTIONS)
Alkaline or lithium
batteries
6x AA
Lithium battery pack Rechargeable battery pack
(LIT-09/LIT-C-8)
External (12V jack) 12-volt battery
(KIT-12V/BATT-12V)
12-volt adapter (AD-12V)
Solar panel (12V jack) Solar panel (SP-12V)
combined with rechargeable
battery pack (LIT-09)
Power supply (Receiver):
(accessories sold separately, see "OPTIONS")
Alkaline or lithium
batteries
6x AA
External (12V jack) 12-volt battery
(KIT-12V/BATT-12V)
12-volt adapter (AD-12V)
Detection system:
Motion sensor PIR
Main sensor's detection
angle
30°

67
English
English
Side sensor's detection
angle
70°
Detection range Adjustable from 5 to 50ft
Delay between each
detection
Adjustable from 1 to 30min
*Additional 10 sec. setting
(see "DELAY")
Electricity option Instant trigger time
(Connected to a 12V DC
Main source only)
External trigger 1/8" jack for normally open
contact
Night time illumination system:
LEDs 38 LEDs
Type Infrared LEDs
Exposure Automatic infrared level
adjustment
Optical field of view: 40°
Wireless photo transmission system:
Wireless range Maximum 250 ft.
Recommendations:
Operating temperature (-20 °C to + 50 °C)
(-4 °F to +122 °F)
Storage temperature (-30 °C to + 75 °C)
(-22 °F to +167 °F)
KIT INCLUDES
• SPYPOINT TINY-W2s
• Blackbox receiver
• Installation straps (2)
• USB Cable
• Audio/video Cable
• User manual
REAR VIEW
BOTTOM VIEW
OK
BUSY
1.
2.
3.
4.
5.
6.
7.
10.9. 11.
13.
8.
12.
14.

89
English
English
1. Power button
2. Recording indicator LED
3. UP button
4. BACK button
5. OK button
6. DOWN button
7. ALK / RECH (switch for battery)
8. SD card slot
9. USB port
10. 12-volt / Solar panel jack
11. External trigger jack
12. TV OUT
13. Removable battery case
14. Microphone
POWER (TINY-W2S CAMERA)
The battery level is shown in the bottom right corner of the
screen when the camera is in "TEST" mode. When a single
line remains, the camera will continue to take pictures but we
strongly recommend changing the batteries before they are
empty. (See figure below)
AA batteries
This camera requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
During the installation of alkaline batteries, place the switch
inside the battery case to "ALK". Insert the batteries in the
battery case as indicated and insert it inside the camera (see
figure below). Exact polarity must be followed. We also
recommend the use of new batteries to ensure maximum
performance of your camera.
Lithium battery pack
This camera can be powered by a rechargeable lithium
battery LIT-09/LIT-C-8 (sold separately, see OPTIONS).
This type of battery is less affected by cold temperatures
and lasts up to 3 times more than alkaline batteries.
During the installation of lithium battery, place the switch
inside the battery case to "RECH". Insert the battery
in the case as indicated and insert it inside the camera
(see figure below)
Connectors
PINTSPY
TM
INTPSPY
Top Top
6 x AA Lithium battery pack (LIT-09)

10 11
English
English
TO INSERT THE BATTERY CASE INSIDE THE CAMERA
External (12V)
This camera can be powered from an external 12-volt DC
input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
When using a 12-volt input, we recommend you to remove
the alkaline batteries to prevent surcharges. During the
installation of 12-volt battery, place the switch inside the
battery case to "ALK". If combined with a lithium battery
pack, slide the switch to "RECH". To find the accessories
available for the 12-volt, see "OPTIONS".
TINY-W2s
PINTSPY
TM
INTPSPY
ConnectorConnector
Solar panel
This camera also offers the possibility of a connection to a
solar panel SP-12V (sold separately, see "OPTIONS") to
maintain the charge of the lithium battery (sold separately,
see "OPTIONS") or the 12-volt battery (sold separately, see
"OPTIONS"). During the installation of the rechargeable
lithium battery or 12-volt battery, slide the switch inside the
battery case to "RECH" to activate the charging system of
the solar panel.
POWER (BLACKBOX RECEIVER)
It is possible to know the battery level of the receiver when it
is turned on. The TEST LIGHT stays on for 8 seconds when
the batteries are full. When the TEST LIGHT flashes for 8
seconds, the batteries are low and need to be replaced. If
the TEST LIGHT remains off, the batteries are completely
empty or are possibly installed in the wrong direction.
AA batteries
The receiver requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
Insert the batteries as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to
ensure maximum performance of the receiver.

12 13
English
English
External (12V)
The receiver can be powered from an external 12-volt DC
input such as a 12-volt battery (KIT-12V/BATT-12V, sold
separately) or a 12-volt adapter (AD-12V, sold separately).
When using a 12-volt connection, we recommend you
remove the alkaline batteries to prevent surcharges. To find
the accessories available for the 12-volt, see "OPTIONS".
Solar panel
The receiver can be powered with a 12-volt battery
combined with a solar panel SP-12V (sold separately, see
"OPTIONS") to maintain the charge of the 12-volt battery
(sold separately, see "OPTIONS").
MEMORY CARD
Using a memory card (sold separately, see "OPTIONS") is
required to operate both the camera SPYPOINT TINY-W2s
and the Blackbox receiver. When the camera is turned on, the
screen displays Insert memory card in "PHOTO", "VIDEO"
or "TEST" mode if no memory card is used, the camera also
beeps. The camera supports a 32GB memory capacity, the
receiver supports 8GB. Before inserting or removing the
memory card, the camera or the receiver must be turned
off. Failing to do so may cause loss of pictures or damage
the pictures already recorded on the memory card. When the
SD card is full in the camera, the viewing screen indicates
Disk full when "PHOTO", "VIDEO" or "TEST" mode
are selected. When the SD card is full in the receiver, the
transmission and recording of images continues by clearing
the first photos on the memory card. The following data
shows an approximate quantity of photos or video length that
can be taken by the camera depending on the memory card
capacity.
RESOLUTION 2.0 GB 4.0 GB 8.0 GB 32 GB
3 MP
5 MP
8 MP
2000
1700
1200
4100
3400
2400
8200
6800
4800
32800
27300
19000
VIDEO RESOLUTION
640 x 480 65 min 2h10 4h10 16h40
"BUSY" LED
The "BUSY" light, located beside the LCD screen, lights up
when the camera records a file.
TEST LIGHT
SD card slot
(bottom view)
12 volt connection
Batteries
compartment
ON/OFF

14 15
English
English
PROGRAMMING
Turn on the camera to navigate in the interface by pressing
"" or "" and press "OK" for selection. To modify the
selection, press "" and "" again and press "OK" to
confirm. To return to the previous menu press "".
PHOTO
To take pictures. The "PHOTO" mode must be selected by
pressing "OK"; the test light in the front of the camera will
blink for 60 seconds to allow the operator to walk away from
the camera.
VIDEO
To take videos. The "VIDEO" mode must be selected by
pressing "OK"; the test light in the front of the camera will
blink for 60 seconds to allow the operator to walk away from
the camera.
TEST
To set the camera or the distance. When "TEST" mode
is selected, no picture or video is recorded. Walk
perpendicularly in front of the camera. When the camera
detects movement, the light blinks to indicate that normally,
a photo or video would have been recorded. If the system
does not detect the movement, increase the distance detection
using the SETTINGS menu (the option "SENSITIVITY"
allows the user to set the sensitivity to "HIGH", "MEDIUM
"or "LOW"). You can also realign the camera differently.
Once you understand how the device responds to detections,
you can better adjust the direction or the height of the camera
How to properly install your camera
using the supplied installation strap:
(Recommended installation height: about 3 feet).
In "TEST" mode, it is possible to take a picture by
pressing the "OK" button. The photo is saved and
appears in "VIEW" mode.
TINY-W2s
Test Light

16 17
English
English
SIGNAL
Wireless signal test
The quality of the wireless signal between the TINY-W2s
camera and the Blackbox receiver can be checked on the
camera in "SIGNAL" mode by choosing the "RANGE
TEST" option. If the icon of the wireless signal is red, the
signal is too weak. Bring closer or move the receiver. If
the icon of the wireless signal is green and stays green for
at least 10 seconds, the signal is strong and stable enough
to enable wireless transmission of images to the receiver.
For best results, the antennas of the two devices must
point upwards and their respective height should be
approximately the same.
Note: To see the wireless signal icon on the main menu, the
"Transmission" option in "Settings" should be "On" "
Note: If the receiver is not powered and synchronized with
the camera , the signal icon remains red.
Manually synchronizing one or multiple sets (TINY-W2s
camera + Blackbox receiver) in the same perimeter
Note: By default, the camera is synchronized with its
receiver on channel 1 and the icon SYNC is green. If you
want to change the synchronization channel or to add other
sets (TINY-W2s camera + Blackbox receiver) in the same
area, refer to the following procedure.
When more than one TINY-W2s cameras are located in
the same area of transmission, it is necessary to manually
synchronize each camera with its receiver on a different
channel. To do so:
1. Turn on the first camera and choose the "SIGNAL" mode.
2. Turn on the first receiver.
3. Choose the "CHANNEL" option on the camera and
press "OK".
4. Use the "" and "" buttons to select a channel and
press "OK".
5. Choose the "SYNC" option on the camera and press
"OK". The camera synchronizes with the powered
receiver and the icon "Sync" goes from red to green when
the synchronization is complete.
6. Turn off the camera and the corresponding receiver.
7. Repeat these steps for each additional camera, up to 9
devices can be paired in the same area.
Note: In the minute following turning on the receiver, the
first 8 seconds allows you to know the battery status by
the test light (see "POWER (blackbox Receiver)" section).
Then, for the rest of the time, the test light flashes rapidly to
indicate the synchronization period.
Note:After a synchronization or when the test light turns off
(after 60 seconds), the receiver can't be synchronized unless
it is turned off and on again.
+

18 19
English
English
SETTINGS
To define the options of the camera. To configure the system
in English, hold the button "" until "LANGUAGE" is
highlighted. Press "OK", select "ENGLISH" and confirm
your choice with "OK". The system will change all the
menus to English.
Time Start /
Time Stop:
Allow the user to set the period of operation
of the camera. The start and stop time are
the hours during the camera is in action and
records pictures or videos. Example: if the
user selects a start time "7:00 am" and a stop
time "11:00 am", the camera will only detect
for that period of time and will stay inactive
for the remaining hours. Press "OK" and use
"" or "" to adjust the hour.
Press "OK" again to set the minutes. When
the time is properly set, press "OK" once
more to go back to other settings. For an
activation of 24 hours, the same start and stop
time must be entered (example: 00:00 as start
time and 00:00 as stop time. These hours are
the basic configuration of your camera)
Note: The hours can be recorded over a
12 or 24 hours period. Refer to "SETTINGS/
TIME FORMAT" (00:00 means midnight)
Transmission:
(On/Off)
Enables or disables the wireless transmission
of images to the Blackbox receiver.
When the transmission is enabled:
• Only pictures are transmitted to the
receiver, not videos.
• The quality of the photos on the receiver
is reduced to maximize transmission:
8MP = 800 x 600 pixels
5MP = 640 x 480 pixels
3MP = 320 x 240 pixels
• When in "TIME-LAPSE" mode, photos
are sent to the receiver except for the
"30s" setting.
• When the delay setting "10s" is selected,
the time between each detection is
calculated when the transmission
is completed. For example, if the
transmission takes two seconds, the time
between the two detections is 12 seconds.
Delay:
(10s/1m/3m/5m/
10m/15m/30m)
Select the time interval between two photos
or videos.
Additional setting: it is possible to reduce
the delay between detections to 10 seconds
(instead of 1 minute) by using the following
procedure. Note that the battery life will be
affected.

20 21
English
English
Turn "OFF" the camera. Press and hold the
"" button and turn the camera "ON". "10sec
enabled" appears on the screen meaning
the minimum delay is now 10 seconds. If
this option is used, the 30 minute delay
disappears. To reset the camera to 1 minute
delay, follow the same procedure. "10sec
disabled" appears on the screen (see figure
below)
Multi-shot:
(1/2/3/4/5/6
consecutive shots)
Take up to 6 consecutive shots at each
detection, with a 10 second delay between
each photo. This option allows up to 6
pictures from different angles when the
camera is in "PHOTO" mode.
Video length:
(10s/30s/60s/90s)
Allow the user to select the recording duration
when the camera is set in "VIDEO" mode.
Language:
(English/Français/
Deutsch/Italiano)
Select a language for the camera’s menu.
Sensitivity:
(High/Medium/
Low)
Allow the user to choose between three
different levels of sensitivity: "HIGH",
"MEDIUM" or "LOW". The camera will
only detect sources of heat in movement.
Make sure to have the least possible objects
in front of the camera during the positioning.
This prevents picture taken by the camera
when oriented towards the sun while an
object moves in front of the camera (e.g. a
branch).
Date: Set the date as Month / Day / Year
Time format:
(12h/24h)
Allow the user to choose between a 12 or
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
Time: Set the time as Hour / Minute
Stamp:
(Yes/No)
Select or cancel date, time, temperature and
moon phases stamp on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
10SEC DISABLED10SEC ENABLED
10 sec delay 1 min delay

22 23
English
English
Resolution:
(High/Medium/
Low)
Set the photo resolution.
High: 8 MP
Normal: 5 MP
Low: 3 MP
Temperature:
(°C/°F)
Select the temperature display in °F or °C.
Continuous:
(Yes/No)
Allow the user to take pictures or videos
even if the memory card is full. The camera
will continue to record photos or videos by
deleting the first files recorded.
Power:
(Batteries/
Electricity)
Allow the user to select the battery power or
the electricity power.
Choose "ELECTRICITY" if the camera
is powered of a main electric supply.
(using a 12-volt DC adapter AD-12V,
sold separately). Main electric supply is
recommended for security purposes. It
provides an instant trigger time when a
movement is detected. The lithium battery
pack and the AA batteries can remain safely
inside the camera and it is ideal in case of
a blackout. A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See "OPTIONS" for accessories).
Note: When using the electricity power, the
"MULTI-SHOT" mode and the "DELAY"
between photos are disabled as the camera
starts instantly every time it detects motion.
Also, the imprinting temperature on each
picture is disabled.
Infrared:
(On/One LED/Off)
Allow the user to choose how many LEDs
will be turned on.
On: Every LEDs work when taking photos
or videos at night.
One LED: Only a single LED works (see
figure). This option can be useful when using
an IR-Booster/Black LEDs IR-Booster (sold
separately, see "OPTIONS").
Off: LEDs are deactivated so your night
photos or videos are pitch black.
TINY-W2
LED for
infrared
sensor

24 25
English
English
Side Sensors:
(On/Off)
When the side sensors are activated, a total
of 7 zones are covered. The central sensor
covers 5 zones. The side detectors are mainly
used to prepare the camera so when your
target passes through the central sensor, the
system is already pre triggered, increasing
greatly the reaction time of your camera.
Note: The side sensors require more battery
power.
Time Lapse:
(Off/30s/1m/3m/
5m/15m/30m/1h)
Allow the user to set the frequency at which
time the camera takes a picture, without
detection. For example, if the option
"5 minutes" is selected in the "TIME LAPSE"
mode, the camera takes a picture every 5
minutes during that period of operation (time
start and time stop) even if there is no detection.
This option allows the user to obtain
pictures of game outside the detection range
of the camera.
Note: The "TIME LAPSE" mode only
applies in "PHOTO" mode, not in "VIDEO"
mode. When "TIME LAPSE" mode is
selected, the "DELAY" mode and the
"MULTI-SHOT "mode are disabled. In
addition, the photo resolution is reduced to
800 x 600 to allow the possibility of video
editing.
REPORT
The report mode keeps a record of the last period of use
of the camera. The beginning date corresponds with the
moment the camera is set to either "PHOTO" or "VIDEO"
mode. Thus, the report is reset when changing modes.
26’
(8m)
30’
(9m)
50’
(15m)
30° 70°40°
6
&
6
Camera
s: side sensors
c: central sensor
Detection distance
(central)
Detection angles
Viewing angle
Detection distance
of the side sensors

26 27
English
English
1.
2.
3.
4.
5.
6.
7.
8.
9.
1. Beginning and end date of the report
2. Number of photos or videos taken during the day
3. Number of photos or videos taken at night
4. Total of photos or videos taken
5. Current time of the camera
6. Current date of the camera
7. Battery level (1/4 = low, 4/4 = full)
8. Remaining space on the SD card estimated by a
number of photos
9. Used space on the SD card (total number of
files, only includes photos and videos taken by a
SPYPOINT camera)
EXTERNAL TRIGGERING
1/8" input which triggers the taking of photos or videos using
a normally open contact. (Example: using a magnetic door
switch connected to an alarm system).
SOUND RECORDING
This camera offers the possibility to record the sound in
"VIDEO" mode. When the "VIDEO" mode is selected, the
camera automatically records the sound. Under the camera,
you can find a rubber cap with the inscription MIC. If the
user does not want to record the sound, the rubber cap
needs to stay in place. If the sound recording is required, the
user must lift the rubber cap and turned it slightly so that
the microphone receiver is completely cleared (See figure
below).
DOWNLOAD TO A COMPUTER
To transfer or view photos and videos on a PC, you must first
turn off the camera and connect the USB cable (supplied)
from the camera to your computer. The computer will
recognize the camera and will install the software itself.
Click on "My Computer" and select "Removable Disk".
Then click "DCIM" and "100DSCIM" to find all your photos
and videos.
Taking the SD card out of the camera and inserting it into
the computer port will achieve the same results. If no SD
slot is built into the computer, a multi-card reader RD25-1
(sold separately, see "OPTIONS").
To upload or view photos stored in the Blackbox receiver,
proceed the same way using the SD memory card.

28 29
English
English
Note: The names of the images recorded by the TINY-W2s
camera starts by PICT while those stored in the receiver
starts by PICW.
VIEW
To view recorded photos or videos on the 2.4" viewing
screen of the camera or on a TV set at home.
• Viewing with the 2.4" screen: When camera is set to
"VIEW", the last recorded photo or video recorded appears
on the screen automatically. Press "" or "" to view next or
previous images.
Press "OK" to view the different options available in "VIEW"
mode.
View Date/Time: To increase the view of the date and time
imprinted on the picture.
Protect: To protect the photo or video on the
screen.
Erase one: To erase the photo or the video on the
screen.
Format: To format memory card and to erase all
protected photos and videos.
Erase All: To erase all stored photos and videos,
with the exception of protected photos
and videos.
Exit: To return to viewing screen.
Note: The number of yellow stars that appear to the right of
the screen corresponds to the resolution of the photos.
=Low (3MP)
=Medium (5 MP)
=High (8 MP)
• Watching on TV: You can view the photos or videos
directly on a TV. Connect the yellow and white ends of the
cable supplied into the “A/V IN” of the TV and the other end
into the “TV OUT” of the camera. The last photo or video
recorded appears on the screen automatically. Press "" or
"" to view next or previous images. The options are the
same as when viewing on the 2.4" screen (see above).
USB EXT
TV OUT

30 31
English
English
TROUBLESHOOTING
No person / animal on photos
1. Rising sun or sunset can trigger sensor. Camera must be
reoriented.
2. At night, motion detector may detect beyond range of
the IR illumination. Reduce the distance setting of the
camera (SETTINGS / SENSITIVITY).
3. Small animals may be triggering unit. Reduce the
distance setting and/or raise height of camera.
4. Motion detector may sense animals through foliage.
5. If person/animal moves quickly, it may move out of
the camera’s field of view before photo is taken. Move
camera further back or redirect camera.
6. Camera must be set on a stable and immovable object
e.g. large tree.
Red light in front of camera that blinks
Camera is set in "PHOTO" or "VIDEO" mode. Red light
on the front of the camera flashes for 60 seconds to allow
the user to leave without being photographed or filmed. The
camera can also be set in «Test» mode.
The camera screen turns off
The camera may be set to « PHOTO » or « VIDEO » mode
and the screen turns off after a period of 60 seconds in order
to preserve battery life.
OPTIONS
See your local dealer or visit www.spypoint.com to find
available products. The following items are popular options
that can be added to a SPYPOINT camera model TINY-W2s.
SD Memory card, SD-8GB
Allows the user to record photos and videos.
Multi-card reader RD25-1
Allows the user to download your photos and
videos directly into a personal computer, without
using the SPYPOINT camera. This reader works
with 25 different types of memory cards and is
compatible with an SD card.
Rechargeable lithium battery pack including
charger, LIT-C-8
Rechargeable lithium battery pack for camera, to
replace alkaline batteries. This type of battery is
less affected by cold temperatures and lasts up to
3 times more than alkaline batteries.
Additional lithium battery pack, LIT-09
An additional lithium battery pack is a handy
spare.
Water-Resistant battery box, KIT-12V
Water-resistant battery box. Includes a 12-volt
rechargeable battery, charger, 12 foot power
cable and carrying strap.
W
W
r

32 33
English
English
12ft power cable, PW-12FT
Spare 12 ft power cable, fits with KIT-12V.
12-volt rechargeable battery and charger,
BATT-12V
To allow using external rechargeable battery
to power the camera.
12-volt power cable, CB-12FT
A 12 ft. cable allowing the user to connect the
camera into an external 12-volt DC power.
12-volt adapter, AD-12V
12-volt adapter for wall outlet, fits all
SPYPOINT cameras.
Water resistant battery box,
KIT6V-12V
Universal kit with two 6V rechargeable
batteries (2.8Ah), with 6V (5.6Ah) and 12V
(2.8Ah) output configuration, AC charger
with water resistant ABS plastic case. 12ft
power cable and strap included. Camo
pattern.
Solar Panel, SP-12V
Solar panel with adjustable steel mounting
kit. Can be used to maintain recharged lithium
battery directly into compatible devices. Can
also be combined with any 12-volt battery.
W
K
U
b
IR-Booster, IRB-W
100 LED wireless infrared module that allows
the user to amplify the infrared lights at night
for clearer shots.
Black LEDs IR-Booster, IRB-W-B
100 invisible LED wireless infrared module
that allows the user to amplify the infrared
lights at night for clearer shots.
Secure Metal Box, SB-T
Metal Box to secure the camera against theft.
It also protects it from breakage that can be
caused by bears or other animals.
Mounting arm, MA-360
Adjustable mounting arm, compatible with
standard 1/4-20" tripod mount screw.
Cable lock, CL-6ft
6 foot long locking cable with key used for
maximum theft protection.
Aluminum Tripod, TP-CAM
Lightweight tripod, aluminum, black color,
with unique anchor system. Max height:
4.9ft (1.5m), Min height: 1.7ft (0.5m). Max
load weight: 5kg (11 lbs). With removable
quick release plate. Fits with most Spypoint
product.

34 35
English
English
LIMITED WARRANTY
SPYPOINT TINY-W2s designed by GG Telecom, is covered
by a one (1) year warranty on material and workmanship
starting from its original date of purchase. The sales receipt
is your proof of purchase and must be presented if
warranty service is needed.
This warranty does not cover any GG Telecom product
whichhas been subjected to misuse, neglect and accidents or
has been improperly used or maintained. Any modification
or tampering of the product will affect its operation,
performance, durability and void this warranty.
REPAIR SERVICE
Repairs for damages not covered by the warranty will be
subject to a reasonable charge. For technical assistance,
write to [email protected]. Give a description of the
problem with a phone number where you can be reached.
IMPORTANT: Under no circumstances will GG Telecom
accept returned products without a Return Material
Authorization number (RMA).
WWW.SPYPOINT.COM
Note: For the latest update of the user manual, refer to our
website. The version number of this manual is on page 2.

36 37
Français
Français
Français
Merci d’avoir choisi le système de surveillance
SPYPOINT TINY-W2s. Ce manuel d’utilisation vous
permettra d’utiliser votre nouvel appareil de façon optimal.
Pour la plus récente version du manuel d’utilisateur ou pour
toutes informations additionnelles, consultez notre site web au
www.spypoint.com.

38 39
Français
Français
SPÉCIFICATIONS
Enregistrement Photo:
Résolution photo 8 MP
Format de fichier photo JPG
Option Time Lapse Intervalles prédéfinis
de 30sec à 1h
Option Multi-photos Jusqu’à 6 photos par détection
Informations imprimées
sur photo
Date, heure, température
et phase de lune
Mode de capture Couleur de jour,
noir et blanc de nuit
Enregistrement Vidéo:
Résolution vidéo 640 x 480
Format de fichier vidéo AVI
Durée des séquences Réglable de 10 à 90 sec.
Mode de capture Couleur de jour,
noir et blanc de nuit
Enregistrement du
son:
Automatiquement enregistré
en mode vidéo
Mémoire de stockage:
(Caméra1+ Récepteur2)
Carte SD/SDHC jusqu’à
32Go1/ jusqu'à 8Go2
(Pas de mémoire interne)
Visionnement:
Écran intégré LCD de 2.4" (6.1 cm)
Sortie TV Vidéo Composite (PAL/NTSC)
Sortie Ordinateur USB 2.0
Alimentation Caméra: (accessoires vendus
séparément, voir OPTIONS DISPONIBLES)
Piles alcalines ou au
lithium
6x AA
Bloc pile lithium Bloc pile rechargeable
(LIT-09/LIT-C8)
Externe (Prise 12V) Batterie 12 volts
(KIT-12V/BATT-12V) ou
Adaptateur 12 volts (AD-12V)
Panneau solaire
(Prise 12V)
Panneau solaire (SP-12V)
combiné avec bloc pile lithium
(LIT-09)
Alimentation Récepteur: (accessoires vendus séparément,
voir section OPTIONS DISPONIBLES)
Piles alcalines ou au
lithium
6x AA
Externe (Prise 12V) Batterie 12 volts (KIT-12V/
BATT-12V) ou Adaptateur
12 volts (AD-12V)
Système de détection:
Détecteur de
mouvement
PIR