Stairmaster SC916 StairClimber User manual

Owner’s Manual
SC 916 StairClimber
001-7200-040510C

Owner’s Manual
2
Thank you for purchasing the StairMaster® Commercial SC916 StairClimber.
For more than 25 years StairMaster has been producing superior tness
equipment used in health clubs and homes around the globe. We hope this
product exceeds your expectations and proves to be a valuable tool.
Read through this manual to familiarize yourself with the operation of your new
SC916 StairClimber. Doing so will help to insure that you get the most out of your
SC916 StairClimber, enjoying safe and eective workouts in the many miles ahead.
StairMaster
8000 NE Parkway Drive, Suite 220
Vancouver, WA 98662
USA
1-888-678-2476
www.stairmaster.com
Introduction

Owner’s Manual
3
Product Specications ...........................................................................................
Safety Warnings & Labels .....................................................................................
Getting Started .......................................................................................................
Guidelines for Getting O and On the StairClimber ..................................7
Operations ..................................................................................................................
Display Denitions and Functions .....................................................................
Key Functions ............................................................................................................
Programs ........................................................................................................
Workout Program Keypad ....................................................................................
Quick Start Program ...............................................................................................
Manual Program ......................................................................................................
Fat Burner Program ................................................................................................
Calorie Burner Program ........................................................................................
Intervals Program ....................................................................................................
Heart Rate Zone Trainer Program ......................................................................
Nautilus®Fit Test Program ...................................................................................
Calorie Goal ...............................................................................................................
HR Intervals Program .............................................................................................
Random Play Program ..........................................................................................
Custom Intervals Program ...................................................................................
CPAT Program ...........................................................................................................
Workout Program Options ..................................................................................
Heart Rate Monitoring....................................................................................
Telemetry Heart Rate .............................................................................................
Maintaining the Transmitter Belt ......................................................................
Contact Heart Rate .................................................................................................
Heart Rate Priority..........................................................................................
Console Codes................................................................................................
Default and Custom Codes .................................................................................
Machine Status Codes ..........................................................................................
Diagnostic Codes ....................................................................................................
Conguration Codes ..............................................................................................
Maintenance ...........................................................................................................
Moving Your Machine ...........................................................................................
Schedule .....................................................................................................................
Checking the Battery Charge .............................................................................
Recharging the Battery Backup .........................................................................
Battery Disposal & Recycling ..............................................................................
Contacting StairMaster....
......................................................................................
Table of Contents
4
5
7
8
8
10
12
12
14
14
15
17
18
19
21
26
27
28
28
29
30
32
32
33
33
34
36
37
38
39
41
43
43
44
45
45
45
46

Owner’s Manual
4
Product Specifications
Model SC 916
Dimensions: 27” W x 43” L x 68” H (68 cm x 109 cm x 173cm)
Unit Weight: 150 lbs (68 kg)
Shipping Package Weight: 178 lbs (81 kg)
Workout Area: 50” W x 81” L (127 cm x 205.74 cm)
Input Power Rating: 9V DC 1.00 Amps
External Power Adapter Ratings:
USA & Canada, 120V 60 Hz input, 9V DC 1.5 A output
Japan, 100V 50-60 Hz input, 9V DC1.5 A output
International (EU & Australia/New Zealand), 230V (or 220-240V) 50 Hz input, 9V DC
1.0 A output
Max user weight: 300lbs (136 kg)

Owner’s Manual
5
Owner’s Manual
5
This icon means a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Before using this equipment, obey the following warnings:
Read and understand the complete Owner's Manual.
Read and understand all Warnings on this machine.
Important Safety Instructions
If this machine is being used in a commercial setting, end users may not have access to this Owner’st
Manual. It is the responsibility of the facility to instruct users as to the proper usage of the equipment,
as well as making them aware of potential hazards.
Keep children away from this machine. Watch them closely when near the machine. Moving partst
that appear dangerous to adults may not appear so to children.
Consult a physician before starting an exercise program. Stop exercising if you feel pain or tightness int
your chest, become short of breath, or feel faint. Contact your doctor before using the machine again.
Examine this machine for loose parts or signs of wear. Pay special attention to the pedals. Contactt
StairMaster® Customer Service for repair information. Use only genuine StairMaster® replacement
parts.
Set up and operate your StairClimber on a hard, level surface.t
Do not wear loose clothing or jewelry while exercising.t
Maximum user weight limit: 300 lb. (136 kg). Do not use if you are over this weightt
Stabilize the pedals before stepping on them and use caution when stepping o the machine.t
Keep at least 19 inches (50 cm) clear area around the machine. This is the recommended safe distancet
for access and passage around and emergency dismounts from the machine.
Warn bystanders to keep a safe distance, at least 3 feet (1 m). Do not allow anyone to touch thet
operator while the machine is in motion.
Do not over exert yourself during exercise. Do not try to exercise with more resistance than you cant
physically handle.
When you use an electrical appliance, basic precautions must always be followed, including the following:
DANGER – To decrease the risk of electric shock always unplug this appliance from the electrical outlet
immediately after use and before cleaning.
To decrease the risk of burns, fire, electric shock, or injury to persons:
An appliance must not be left unattended when plugged in. Unplug from outlet when not int
operation, and before you put on or removing parts.
Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabledt
persons.
Use this appliance only for its intended use as described in this manual. Do not use attachments thatt
are not recommended by the manufacturer.
Do not operate this appliance if it has a damaged cord or plug, if it is not working correctly, if it hast
been dropped or damaged, or fallen into water. Return the appliance for examination and repair.
Keep the cord away from heated surfaces.t
Do not drop or put any object into any opening.t
Do not use outdoors.t
To disconnect, turn all controls to the o position, then remove plug from outlet.t
KEEP THESE INSTRUCTIONS

Owner’s Manual
6
Owner’s Manual
6
Before Using Your Product : Find and read all warning labels located on the
StairMaster® Commercial Series SC 916 StairClimber, prior to using your product.
Be sure to replace any warning label if damaged, illegible, or missing. If you
need replacement labels, please call a StairMaster representative at
1-888-678-2476.
®
Label 1: General warning label.
Location: Affixed to the lower front of the left side cover (see Figure 1).
Label 2: General exercise warning label.
Location: Affixed to the mast below the console (see Figure 2).
Warning
Label Serial
number
SafetyWarning Labels
Figure 1
SC916
STOP
123
456
78 9
0
STOP
STOP STOP
STOP
QUICK
START
MORE
WORKOUTS
HR ZONE
TRAINER
CALORIE
BURNER
INTERVALS
MANUAL FAT
BURNER
Warning
Label
Figure 2

Owner’s Manual
7
Getting Started
To avoid injury, please carefully follow the instructions.
Note: Throughout this manual, all references to the left or right side and to the front
or back, are made as if you were on the machine, ready to exercise.
Guidelines for Getting On and O the SC 916 StairClimber:
Instruct each user in the following guidelines for getting on and o the
StairClimber.
1. You should see the “SELECT WORKOUT” message on the display.
2. Select the MANUAL exercise program so you can control the pace of your first
workout and get used to the exercise motion. Press [MANUAL] and then press
[ENTER].
3. The console will prompt you to enter your body weight. Enter your weight in
pounds (or kilograms if the console is set to metric units). Correct entry errors
by pressing [CLEAR] before you press [ENTER].
4. The console will prompt you to enter your step rate. Enter your desired step
rate from 26 (very easy) to 174 (extremely hard). First time users may want
to select a low step rate, for example, 26. Correct entry errors by pressing
[CLEAR] before you press [ENTER].
5. The console will prompt you to enter the workout time in one-minute
increments between 5 and 99 minutes. Press [1], [0], [ENTER] to exercise
for ten minutes. After time is entered, the console will display “ENJOY
WORKOUT” and your program will begin. If you do not start exercising within
30 seconds, the console will return to the start screen and shut down.
6. Begin pedaling so the pedals do not hit the ground during the workout. When
you begin to exercise, the MANUAL program starts at the level you selected
during data entry.
7. As you become comfortable with the exercise motion, press [LEVEL:]
and [LEVEL:] to adjust the step rate.
8. Relax while exercising.
9. Before stepping o the StairClimber, stop and let the pedals slowly bring you
to the floor. Use the Side rails for support and lift one foot slowly until the
pedal arm contacts the upper stop. Place that foot on the floor. Repeat for
the other foot.Do not let the pedals slam into the upper stops, since this may
cause unnecessary wear and tear.

Owner’s Manual
8
Operation
UNDERSTANDING THE DISPLAY AND CONTROLS
The SC916 console is a computerized panel used to operate the SC916
StairClimber, display workout data and operational status . Take time to read
through and familiarize yourself with the operation of the SC916 StairClimber, and
the location of all keys, to take full advantage of all of your machine’s workout
options.
DISPLAY DEFINITIONS AND FUNCTIONS
Computer Display and Functions:
TIME The selected workout time is displayed in the upper left
section of the upper display window. In most of the
workouts, the timer will count down, in minutes and
seconds, until the workout is finished or stopped. If (0) is
entered in the (MANUAL) or (HR ZONE TRAINER) workout,
the timer will count up.
INTERVAL TIMER The interval timer is displayed in the lower display, upper
left corner. The interval timer counts down the remaining
time
within each interval.
SC916
STOP
123
456
78 9
0
STOP
STOP STOP
STOP
QUICK
START
MORE
WORKOUTS
HR ZONE
TRAINER
CALORIE
BURNER
INTERVALS
MANUAL FAT
BURNER

Owner’s Manual
9
STEP RATE Pressing the key increases the workload intensity and
pressing thekey decreases the workload intensity.
HEART RATE Current Heart Rate (HR), in Beats Per Minute (BPM), is
displayed next to the heart icon on the lower display.
Percentage of Maximum HR -An approximation of maximal HR is calculated
based on the latest American College of Sports Medicine predictive equation as
follows:
Max Heart Rate = 215 – (Age * .75)
Percentage of maximum HR will only be shown in HRC programs.
Example: For a person 40 years of age, max HR is estimated as (215 – (40 (age) *
.75) = 185 . 185 BPM would be the approximate maximum HR for a
40-year-old user. If the user works out at 140 BPM, then 76% (140 / 185
= 76%) will be displayed in the upper left corner of the lower display
area. This means that the 40-year-old user working at 140 BPM is at
76% of their maximum HR.
(See the Heart Training programs for more information.)
DISTANCE Provides a cumulative total of the equivalent distance, in
miles (or kilometers if your display is set to metric units),
you have traveled.
CALORIES Provides a current total of the number of calories burned
during a workout.
Note: This number is only an approximation as a user’s
caloric expenditure will vary significantly based on a
person’s age, gender, weight and metabolism.
CALORIES/HOUR Provides the rate at which calories are burned per hour at
the current resistance level and steps per minute.
SPEED Displays the step rate in steps per minute (SPM).
User should consult a physician to determine an appropriate Target
Heart Rate (THR) in which to exercise, based on age, weight, and physical
condition. While StairMaster provides some THR ranges, these are only
approximations and should not be viewed as a medical recommendation.
Operation

Owner’s Manual
10
WATTS During a workout, this statistic displays the power output at
the current RPM and intensity level, displayed in watts (746
watts = 1 hp).
METs MET (multiple of the resting metabolic rate) indicates the
relative energy cost of exercise. While you are sitting
quietly, your body consumes oxygen at the rate of 1 MET
or about 3.5 milliliters per kilogram of body mass per
minute. When you exercise, your body needs more oxygen
in order to function. For example, exercising at 10 METs
requires ten times the resting rate of oxygen consumption,
or about 35 milliliters per kilogram per minute. During a
workout, the display shows the current MET level. During
the workout summary, the average MET level is displayed.
During your workout, keeping track of the METs will show
you how hard you are working—the higher the MET level,
the harder you are working.
WORKOUTPROFILE The dot-matrix area of the display shows the actual course
profile of the selected exercise program. The taller the
column, the higher the step rate and/or METs for that
interval. The flashing column shows your current interval.
Operation
KEY FUNCTIONS
Display LOCK / UNLOCK - Statistics Key
During the exercise program, the Display LOCK / UNLOCK key is used to track
workout statistics which are shown in the text line of the display window. When
a workout is started, the display is in an unlocked mode and the various exercise
statistics will scroll in order. Press the [DISPLAY] key once to turn o the scan
feature and show the current statistic in the display window. Press the [DISPLAY]
key a second time and the scan feature will turn back on to scroll through the
dierent statistics.
When in the Display Unlock mode, the console will cycle through the following
statistics in order: Miles, Calories/Hour, Steps/Min, Floors, Watts, METs.
At the completion of a workout, the statistic averages are calculated based on the
accumulation of data during the workout program.

Owner’s Manual
11
Operation
QUICK START KEY The Quick Start Key provides an immediate start to a
workout session without having to provide any user
information.
LEVEL(STEPRATE) The exercise Step Rate may be changed at any time during
UP & DOWN KEYS a workout. Pressing thekey increases the step rate
and pressing thekey decreases the step rate. After the
rst press of a Level key, the text line will show the target
step rate. Further presses will increase or decrease the
step rate.
STOP KEY Press the STOP Key any time you want to pause the workout
program for up to 2 minutes. Press the STOP Key a second
time, and the workout statistics will be displayed, then the
console will return to the “SELECT WORKOUT” prompt.
NUMERIC KEYPAD The numeric keypad is located on the right side of the
(0-9) console. During program setup, this keypad allows you to
quickly enter requested information such as Time, Age,
Intensity Level , Weight and HR.
Enter: The ENTER Key conrms workout selections and
stores the information used by the console to
calculate workout statistics.
Clear: During data entry, the CLEAR Key erases information
from the console memory and backs up to the
previous data entry prompt.

Owner’s Manual
12
Operation
PROGRAMS
The StairMaster®Commercial Series SC916 StairClimber has a wide variety of
programming options with a great amount of exibility to allow anyone of any
tness level to use.
Workout Program Keypad
The workout program keypad is located to the left of the display. There are six
workout program keys, including a More Workouts key with multiple advanced
program options.
While the console is in the “SELECT WORKOUT” mode, press one of the exercise
program keys to preview the desired workout. After selecting the desired
workout, simply follow the prompts to enter the required user data for that
program.
When entering data, the user can select the standard default values by pressing
[ENTER] at the display prompt without rst typing data. This will set up the
console with the following default data:
SC916
STOP
123
456
78 9
0
STOP
STOP STOP
STOP
QUICK
START
MORE
WORKOUTS
HR ZONE
TRAINER
CALORIE
BURNER
INTERVALS
MANUAL FAT
BURNER

Owner’s Manual
13
Operation
STEP RATE : 41
CHR PERCENT : 70
WEIGHT : 175 lbs. (80 kg)
INTENSITY LEVEL : 3
AGE : (HR Zone Trainer program only) 40 years
WORKOUT TIME : The default time in the programmed workouts and Quick
Start is 20 minutes. The Manual and HR Zone Trainer programs do not have a
specied default time. In this program, the console timer will count up to the
maximum time of 99 minutes.
Once you have selected a program, follow the console prompts.
ENTER WEIGHT : Type in your body weight in pounds (or kilograms if your
console is set to metric units).
ENTER STEP RATE : Type in your desired step rate. The StairClimber has
a step rate range of 26 to 174.
ENTER TIME 5-99 : Select the workout duration in one minute increments
from 5 to 99.

Owner’s Manual
14
Operation
The Quick Start Program
Provides an immediate start, without having to enter any user information. This
program uses the standard default settings to calculate calories burned during a
workout session.
To use the Quick Start program:
1. Press the [QUICK START] key. A message, “ENJOY WORKOUT” is
displayed, the workout begins with exercise statistics accumulating.
2. During the workout:
The step rate may be changed at any time during the workout by pressing
the [Level: UP] key to increase the step rate, or the [Level: DOWN] key to
decrease the step rate. Any changes to the step rate will be displayed in the
current ashing column. The new step rate will continue through the rest of
the workout until changed using the Level keys.
3. Press [STOP] to pause the workout. Press [STOP] again to end the workout.
The workout statistics will be displayed, and then the console will revert
back to the “SELECT WORKOUT” message.
CALORIES BURNED: Your weight and step rate are used to calculate the
number of calories burned for each minute of exercise and the total number of
calories burned for the exercise session.
The Manual Program
The Manual Program allows you to control the step rate of the SC916
StairClimber during the workout, while accurately calculating exercise statistics
based on your weight. The default step rate is 41 unless changed during the data
entry mode. The workout prole in the display window is divided into 30 equal
intervals within the selected workout time. The prole is based on the MET
level, with every 1 MET equating to one vertical bar. MET level is based on a
combination of step rate and time.
To use the Manual program:
1. Press the [MANUAL] key. The message, “MANUAL WORKOUT” will be
displayed in the text line and the workout prole displayed in the lower
display. Press [ENTER] to accept.

Owner’s Manual
15
2. The console will display “ENTER WEIGHT - LBS” (or “ENTER WEIGHT - KG”
if in Metric mode). Enter your weight using the numeric keypad and press
[ENTER]. Or, press [ENTER] to accept the default value.
NOTE: Your weight is used to calculate the number of calories
burned for each minute of exercise and the total number of calories
burned for the exercise session.
3. The console will display “STEP RATE”. Enter the desired step rate using the
numeric keypad (26 - 174) and press [ENTER]. Or, press [ENTER] to accept
the default value.
4. Next, the console will display “ENTER TIME 5 – 99”. Enter the desired time
and press [ENTER]. Or, press [ENTER] to select the default time.
If you press [0], then the timer will count-up from 0:00 to the maximum time of
99:00.
5. The console will display “ENJOY WORKOUT” and the timer will begin.
The step rate may be changed at any time during the workout by pressing
the [Level: UP] key to increase the step rate, or the [Level: DOWN] key to
decrease the step rate. Any changes to the step rate will be displayed in the
current ashing column. The new step rate will continue through the rest of
the workout until changed using the Level keys.
6. Press [STOP] to pause the workout. Press [Stop] again to end the workout.
The workout statistics will be displayed, and then the console will revert back
to the “SELECT WORKOUT” message.
The Fat Burner Program
The Fat Burner program is a 30-interval workout designed with moderate changes
in intensity level designed to stimulate fat store assimilation for users on a weight
control program. The prole in the center display indicates relative intensity. Any
changes to the intensity level will not change the look of the remaining prole;
however, the new intensity level will continue through the rest of the workout.
Operation

Owner’s Manual
16
To use theFat Burner program:
1. Press the [FAT BURNER] key. The message, “FAT BURNER”, will be
displayed on the text line with the workout prole displayed in the lower
display. Press [ENTER] to accept.
2. The console will display “ENTER WEIGHT - LBS” (or “ENTER WEIGHT - KG”
if in Metric mode). Enter your weight using the numeric keypad and press
[ENTER]. Or, press [ENTER] to accept the default value.
Your weight is used to calculate the number of calories burned for each
minute of exercise and the total number of calories burned for the exercise
session.
3. The console will display “ENTER LEVEL 1-20”. Enter the desired intensity
level using the numeric keypad and press [ENTER]. Or, press [ENTER] to
accept the default value.
4. Next, the console will display “ENTER TIME 5–99”. Enter the desired time
and press [ENTER]. Or, press [ENTER] to select the default time.
5. The console will display “ENJOY WORKOUT” and the timer will begin.
The intensity level may be changed at any time during the workout by
pressing the [Level: UP] key to decrease the resistance, or the [Level:
DOWN] key to increase the resistance. Any changes to the intensity level
will not change the look of the remaining prole; however, the new intensity
level will continue through the rest of the workout.
6. Press [STOP] to pause the workout. Press [Stop] again to end the workout.
The workout statistics will be displayed, and then the console will revert
back to the “SELECT WORKOUT” message.
CALORIES BURNED : Your weight and intensity level are used to calculate the
number of calories burned for each minute of exercise and the total number of
calories burned for the exercise session.
Operation

Owner’s Manual
17
The Calorie Burner Program
The Calorie Burner program is a 30 interval workout designed for users wanting to
increase their aerobic capacity. The changes of the intensity in the program are
greater than the changes in the Fat Burner program, and are designed specically
to tax the cardiorespiratory system. The prole in the center display indicates
relative intensity. Any changes to the intensity level will not change the look of
the remaining prole; however, the new intensity level will continue through the
rest of the workout.
To use the Calorie Burner program:
1. Press the [CALORIE BURNER] key. The message, “CALORIE BURNER”, will
be displayed on the text line with the workout prole displayed in the lower
display. Press [ENTER] to accept.
2. The console will display “ENTER WEIGHT - LBS” (or “ENTER WEIGHT - KG”
if in Metric mode). Enter your weight using the numeric keypad and press
[ENTER]. Or, press [ENTER] to accept the default value.
Your weight is used to calculate the number of calories burned for each minute
of exercise and the total number of calories burned for the exercise session.
3. The console will display “ENTER LEVEL 1-20”. Enter the desired intensity
level using the numeric keypad and press [ENTER]. Or, press [ENTER] to
accept the default value.
4. Next, the console will display “ENTER TIME 5-99”. Enter the desired time and
press [ENTER]. Or, press [ENTER] to select the default time.
5. The console will display “ENJOY WORKOUT” and the timer will begin.
The intensity level may be changed at any time during the workout by pressing
the [Level: UP] key to decrease the resistance, or the [Level: DOWN] key to
increase the resistance. Any changes to the intensity level will not change
the look of the remaining prole; however, the new intensity level will
continue through the rest of the workout.
6. Press [STOP] to pause the workout. Press [Stop] again to end the workout.
The workout statistics will be displayed, and then the console will revert back
to the “SELECT WORKOUT” message.
Operation

Owner’s Manual
18
The Intervals Program
The Intervals program is an interval workout containing 8 alternating rest
intervals with 7 exercise intervals.
An interval cycle consists of a work phase and a rest phase. You may scale the
rest intensity level and the work intensity level independently–which will be
saved for the remainder of the workout.
To use the Intervals program:
1. Press the [INTERVALS] key. The message, “INTERVALS”, will be displayed
on the text line with the workout prole displayed in the lower display. Press
[ENTER] to accept.
2. The console will display “ENTER WEIGHT - LBS” (or “ENTER WEIGHT - KG”
if in Metric mode). Enter your weight using the numeric keypad and press
[ENTER]. Or, press [ENTER] to accept the default value.
Your weight is used to calculate the number of calories burned for each
minute of exercise and the total number of calories burned for the exercise
session.
3. The console will display “ENTER WORK RATE”. Enter the desired work rate
level using the numeric keypad and press [ENTER]. Or, press [ENTER] to
accept the default value.
4. The console will display “ENTER REST RATE”. Enter the desired rest rate
level using the numeric keypad and press (ENTER). Or, press (ENTER) to
accept the default value.
5. Next, the console will display “ENTER TIME 5–99”. Enter the desired time
and press [ENTER]. Or, press [ENTER] to select the default time.
6. The console will display “ENJOY WORKOUT” and the timer will begin.
The rate level may be changed at any time during the workout by pressing
the [Level: UP] key to decrease the resistance, or the [Level: DOWN] key to
increase the resistance. Any changes to the rate level will only change the
level in the current rest or work phase.
Operation

Owner’s Manual
19
To change the rate level of the work phase, you must change the intensity
level during a work phase. To change the rate level of the rest phase, you
must change the rate level during a rest phase. Changing the rate level will
not change the look of the remaining prole; however, the new intensity rate
will continue through the rest of the workout.
7. Press [STOP] to pause the workout. Press [STOP] again to end the workout.
The workout statistics will be displayed, and then the console will revert
back to the “SELECT WORKOUT” message.
Heart Rate (HR) Zone Trainer Program
The HR Zone Trainer program allows you to exercise at a selected THR by
automatically varying the intensity level (resistance) during the workout. The
default THR is equal to 70% of your maximum HR which is calculated by the
following equation:
Max HR = 215 - (Age * .75). Target HR = Max HR * .7
To choose a dierent THR (between 100 and 180 beats per minute) at any time
during the workout, use the numeric keypad to enter the new THR, followed by
the [ENTER] key.
To use theHR ZoneTrainer program:
1. For best results, use a telemetry HR chest belt. However, you can also use
the contact HR grips located just below the console on the handlebars.
If you are using the telemetry HR method, put the chest strap on. Remember
to wet the electrodes underneath the chest strap. The console must detect a
HR signal to allow selection of the HR Zone Trainer program.
If you will be using contact HR, then place your hands on the contact HR
grips below the console on the handlebars.
2. Press the [HR ZONE TRAINER] key. The message, “HR ZONE TRAINER”, will
be displayed on the text line with the workout prole in the lower display.
Press [ENTER] to accept.
3. The console will then display “Checking for HR. Need HR belt or Hold HR
sensors”. When the console detects a valid signal it will then proceed to the
next step.
Operation

Owner’s Manual
20
4. The console will display “ENTER WEIGHT - LBS” (or “ENTER WEIGHT - KG”
if in Metric mode). Enter your weight using the numeric keypad and press
[ENTER]. Or, press [ENTER] to accept the default value.
Your weight is used to calculate the number of calories burned for each
minute of exercise and the total number of calories burned for the exercise
session.
5. The console will display “ENTER AGE 10 -99.” Enter your age using the
numeric keypad and press [ENTER]. Or, press [ENTER] to accept the default
value of 40 years old.
6. The console will display “TARGET HR.” A suggested THR will be displayed,
based on your the numeric keypad and then press [ENTER]. Or, press
[ENTER] to accept the default value.
7. The console will display “ENTER TIME 5-99.” Enter the desired time and
press [ENTER]. Or, press [ENTER] to accept the default value.
8. The console will display “ENJOY WORKOUT” and the timer will
begin.
The following messages may be displayed during a workout:
9. Press [STOP] to pause the workout. Press [STOP] again to end the
workout. The workout statistics will be displayed, and then the console will
revert back to the “SELECT WORKOUT” message.
CALORIES BURNED - Your weight and intensity level are used to calculate the
number of calories burned for each minute of exercise and the total number of
calories burned for the exercise session.
“CHECK HR BELT” Indicates that the telemetry HR signal has
been missing for the last 30 seconds.
“HOLD HR SENSORS” Indicates that the contact HR signal has been
missing for the last 30 seconds.
“HR BELT NEEDED” No telemetry belt signal has been sensed
during the initial setup time.
“HR MODE DIS ABLED” No HR signal is allowed due to the set up
option that was chosen. HR monitoring is not
possible. To change HR option, refer to the HR
Priority section of this manual.
Operation