Stanley KEYPAD EZ LOCKS User manual

KEYPAD EZ LOCKS
KEYPAD EZ LOCKS

2
ELECtrOniC
HArdwArE fEATurEs
• eavy-duty mechanical platform designed and manufactured for the toughest applications.
•When the deadbolt is projected, deadbolt sensing prevents access by unauthorized PIN’s.
(Key override feature standard on Keypad EZ.)
•Mechanical override allows for emergency access.
•Available in common finishes and trims to match Stanley/BEST’s 9K cylindrical series and 40 mortise series, providing
aesthetic continuity.
•Available in cylindrical, mortise, and exit device trim platforms to meet most common applications.
•12 position keypad design with audible and visual feedback.
•Standard battery pack yields a minimum of 65,000 cycles / 2–5 year battery life for cylindrical chassis, 130,000 cycles /
3–5 year battery life for mortise or exit trim platform.
•Optional extended battery pack yields twice the battery life as the standard battery pack.
•Local factory-trained technical services are available 24 hours a day to meet any emergency need.
•Replacement parts available.
•Features Stanley/BEST’s standard 3 Year warranty.
•Weather-resistant for versatile applications, including doors exposed to inclement weather.
•Remote unlock standard.
sofTwArE fEATurEs
• Variable PIN length from 3 – 6 digits.
•Maximum of 50 users.
•All programming occurs through the keypad.
• Passage Mode privilege – authorized users can unlock device for extended periods of time.
• Deadbolt Override privilege – authorized users can gain access even when a mortise deadbolt is thrown.
• Provides for 1 Administrator PIN and 5 Supervisor PIN’s to allow easy management of groups of users.
tAbLE Of COntEntS & fEAturES
KZ cylindrical specifications . . . . . . . . . . . . . . . . . . . . . .5
KZ cylindrical functions . . . . . . . . . . . . . . . . . . . . . . . . .6
KZ cylindrical levers . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
EXZ exit hardware specifications & trim chart . . . . . . . .6
Order procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Patented keying system . . . . . . . . . . . . . . . . . . . . . . . . .8
TAblE of coNTENTs
ardware / Software Features . . . . . . . . . . . . . . . . . . . .2
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Z mortise specifications . . . . . . . . . . . . . . . . . . . . . . .3
Z mortise functions . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Z mortise levers/knob . . . . . . . . . . . . . . . . . . . . . . . . .4
PagePage
EZ – oPTioNs
AL– Besides complying with a wide variety of accessibility codes and ordinances, Stanley/BEST lever handles are available with a
special abrasive feature. Abrasive strip on the lever im me di ate ly identifies warnings on doors to hazardous areas for the blind.
EXBB– Extended life battery pack for double the operating life. (93KZ & 45 Z ONLY)
LM– Lost motion feature allows the lever handle to move 45 degrees from parallel to the horizontal plane without engaging the
latchbolt assembly. When the lockset is in the locked mode, this feature makes over-torque or over-leverage abuse more
difficult to achieve. ote: Available in 9K cylindrical only.
on-IC– The 9KZ may be adapted to existing keying systems by using a special retrofit lever and throw member that will accept
6-pin single shear-line cylinders from the following manufacturers: Corbin-Russwin, Medeco, Sargent, Schlage, Yale.
ote: Available in #15 lever style only. (Cylinder not supplied).
SH– Security head provided for all exposed screws.
Thick door–Specify thickness if other than 1 3⁄4 ".
TL– Tactile levers may be used in areas where improved grip is required or as a warning in hazardous or Safety First areas.
Grooves are machined into the back of the hand grasp portion of the lever to improve grip and/or provide a sensory warning.
This option can be used for blind, safety, or accessibility applications.
EZ – OPtiOnS
EZ – AccEssoriEs (not shown)
McGard™ Battery Door Screw (Specify Finish) VPD - S - SCRW
McGard™ Driver Bit VPD - S - DRVR
Standard Driver Bit VPD - T15
Replacement Battery Pack VPD-BB
Extended Battery Pack VPD-EXBB
Part Description Catalog umber
EZ–ACCESSOriES

3
C PrODuCtS
HZ SPECifiCAtiOnS
HZ – MorTisE sPEcificATioNs
MEcHANicAl
Case: 0.095"cold rolled steel, 5 7/8" x 7/8"D x 4 1/16"W. Steel is zinc dichromate plated
for corrosion protection.
Faceplate: Brass or bronze material, 8" x 1 1/4"W x 1/16"T. Lock face automatically
adjusts to proper bevel during installation.
Strike: Brass, bronze, or stainless steel base material, 4 7/8" x 1 1/4"W x 3/32"T. Fits
standard door frame cut out as specified in ANSI A115.1. Universal (non-handed) strike
supplied standard with lock.
Backset: 2 3/4"
Certification: UL listed for GYQS electrically controlled single point locks or latches for
use on 3 hour A label doors. The listing applies for both U.S. and Canadian applications.
Door Thickness: Standard lock configuration designed for doors 1 3/4"thick. Thick door
configuration available for doors up to 3"thick (specify thickness when ordering).
Latchbolt: Solid stainless steel, 3/4"throw. Latch is oil-impregnated for anti-friction
operation. Reversible without opening case.
Deadbolt: Stainless steel, 1"throw.
Auxiliary bolt: Stainless steel, non-handed.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 3, 14, and 15
return to a minimum of 1/2"of door surface. Lever 12, 16 and 17 do not return.
Escutcheon: 10 3/8" x 3 1/4"W x 1"D (1"at the top, sloping down to 3/4"at the bottom)
Finishes: 605 - bright brass, clear coated; 606-satin brass, clear coated; 611-bright bronze,
clear coated; 612-satin bronze, clear coated; 613*-oxidized satin bronze, oil rubbed; 619-satin
nickel plated; 625-bright chromium plated (brass base material); 626-satin chromium plated
(brass base material); 690*-dark bronze coated (brass base material)
*613 finish is designed to wear over time, providing an “antique” appearance.
690 finish will continue as a dark brown appearance over time.
ElEcTroNic
Primary power: Alkaline battery pack.
Memory backup: Maintains programming 100 years.
User feedback indicators: Visual and audible.
Operating & Storage temperature: -30°C to +60°C (-22°F to +140°F).
Relative humidity: 10% to 90% non-condensing.
Shock: 2000 Gs RMS (maximum door-slam shock).
Compliance to FCC, Canadian, EMC requirements; for interference FCC Class A digital ap pa ra tus.
KEYPAd
Bezel size: 2 5⁄8 "x 3 1⁄4 ".
Material: Bezel– igh impact ABS,
Keypad–Encapsulated elastomer.
ESD Protection: 15KV
Button operating life: 3-5 million cycles.
Button operating force: 3.88 ounces.
Operating & Storage temperature: -35°C to +65°C
(-31°F to +149°F).
Sealing: Weatherproof lens and gasket provides protection for out door use. (Usable in all environmental/exterior applications.)
40HZ

4
ELECtrOniC
HZ – mOrtiSE funCtiOnS
Latch w/o
key override
Deadbolt w/o
key override
Deadbolt w/
key override
Latch w/key
override Internal motor drive mechanism operated
by electronic signal, when pre sent ing
valid token. Green light in di cates valid
access. Red light and sound er in di cate
invalid access attempt.
HZ – MorTisE fuNcTioNs
Latchbolt operated by lever either side,except
when outside lever is locked by internal motor
drive mechanism; latchbolt is re tract ed by key
outside. Deadbolt operated by key outside
and turn lever inside. When deadbolt is
extended, turning inside le ver or electronically
unlocked out side lever re tracts both deadbolt
and latchbolt simultaneously. Auxiliary latch
dead locks latchbolt.
Internal motor drive mechanism
op er at ed by electronic signal when
presenting valid token. Green light
indicates valid ac cess. Red light and
sounder in di cate invalid access
attempt. Elec tron ic sensor recognizes
whether dead bolt is retracted or
thrown. Lock grants access only to
deadbolt-authorized per son nel when
deadbolt is thrown.
Latchbolt operated by lever either side, except
when outside lever is locked by internal motor
drive mech a nism. Deadbolt operated by turn
knob inside. When deadbolt is extended,
turning inside lever or elec tron i cal ly unlocked
outside lever retracts both deadbolt and
latchbolt simultaneously. Auxiliary latch
dead locks latchbolt.
TV
LV
Latchbolt operated by lever ei ther side, except
when outside lever is locked by internal motor
drive mech a nism. Auxiliary latch deadlocks the
latch bolt.
V
DV
Latchbolt operated by lever ei ther side,except
when outside lever is locked by internal motor
drive mech a nism; latchbolt is retracted by key
outside. Auxiliary latch deadlocks the latch bolt.
Diagram Function Mechanical Electronic
Code
HZ – lEVErs/KNob
HZ – mOrtiSE LEVErS
#14 lever
#16 lever #17 lever
#3 lever #12 lever
#4 knob
#15 lever

5
C PrODuCtS
MEcHANicAl
Materials: Internal parts are brass, zinc or corrosion-treated steel.
Chassis: 2 1⁄16 "diameter to fit 2 1⁄8 "diameter hole in door.
Strike: Brass or bronze, 4 7⁄8 "x 1 1⁄4 "x 3⁄32 ". Fits standard door frame cut out as spec i fied in ANSI
A115.1. Correct strike automatically supplied with unit.
Backset: 2 3⁄4 "standard, 3 3⁄4 "and 5"available.
Door thickness: For doors 1 3⁄4 "- 2 1⁄4 "thick.
Installation: Lock dimensions requires modified door prep ANSI A156.2 Series 4000, Grade 1 to
mount housing.
Latchbolt: 9⁄16 "throw.
Forged trim housing: Dimensions: 10 3⁄8 " x 3 1⁄4 "W x 1"D sloping down to 3⁄4 ".
Lever: Made from high-quality zinc alloy. Body is approximately 1 5⁄8 "in diameter: andle
is approximately 4 3⁄4 "in length (from center-line of chassis). (#14 and #15 conform to
Cal i for nia Titles 19 and 24.)
Certification: UL listed For GYQS Electrically controlled single point locks or latches for
use on 3 hour A label doors. The listing applies for both U.S. and Canadian applications.
Finish: 605 - bright brass, clear coated; 606-satin brass, clear coated; 611-bright bronze,
clear coated; 612-satin bronze, clear coated; 613*-oxidized satin bronze, oil rubbed;
619-satin nickel plated; 625-bright chromium plated (brass base material); 626-satin
chromium plated (brass base material); 690*-dark bronze coated (brass base material).
* 613 finish is designed to wear over time, providing an “antique” appearance.
690 finish will continue as a dark brown appearance over time.
ElEcTroNic
Primary power: Alkaline battery pack.
Memory backup: Maintains programming 100 years.
User feedback indicators: Visual and Audible.
Operating & Storage temperature: -30°C to +60°C (-22°F to +140°F).
Relative humidity: 10% to 90% non-condensing.
Shock: 2000 Gs RMS (maximum door-slam shock)
Compliance to FCC , Canadian, EMC requirements; for in ter fer ence FCC Class A digital apparatus.
KEYPAd
Bezel size: 2 5⁄8 "x 3 1⁄4 "
Material: Bezel–high impact ABS, Keypad–silicone rubber.
ESD Protection: 15KV.
Button operating life: 3-5 million cycles.
Button operating force: 3.88 ounces.
Operating temperature: -35°C to +55°C (-31°F to +131°F).
Storage temperature: -40°C to +55°C (-40°F to +131°F).
Sealing: Weatherproof gasket provides protection for outdoor use. (Usable in all environmental/exterior applications.)
KZ SPECifiCAtiOnS
KZ – cYliNdricAl sPEcificATioNs
KZ funCtiOnS
KZ trimS
KZ – cYliNdricAl lEVErs
KZ – cYliNdricAl fuNcTioNs
Diagram Function Mechanical Electronic
Code
DV Dead locking latchbolt operated by lever either Internal motor drive mechanism operated by
Cylindrical lever either side, except when outside le ver is electronic signal when presenting valid token.
Latch w/key locked by internal motor drive mech a nism; Green light in di cates valid access. Red light
override latchbolt is deadlocked. and sound er in di cate invalid access attempt.
#14 lever #15 lever #16 lever
9KZ

ELECtrOniC
6
ExZ SPECifiCAtiOnS
EXZ – EXiT HArdwArE sPEcificATioNs
Ex trim CHArt
EX TriM cHArT
MEcHANicAl
Materials: Internal parts are brass, zinc or corrosion-treated steel.
Brass or bronze, 4 7⁄8
"x 1 1⁄4 "x 3⁄32 ". Fits standard door frame cut out as
spec i fied in ANSI A115.1. Correct strike automatically supplied with unit.
Strike box sup plied stan dard. Forged trim housing
Lever handle: Brass or bronze. (Lever #14 and #15 conform to California Titles 19 and 24.)
Certification: UL listed For GYQS Electrically controlled single point locks or latches for use on 3 hour A label doors. The
listing applies for both U.S. and Canadian applications.
Finish: 606-Satin brass, clear coated; 613*-oxidized satin bronze, oil rubbed; 626-satin chromium plated; 690*-dark bronze
coated (brass base material).
*613 finish is designed to wear over time, providing an “antique” appearance. 690 finish will continue as a dark brown appearance over time.
ElEcTroNic
Primary power: Alkaline battery pack.
Memory backup: Maintains programming to 100 years.
User feedback indicators: Visual and Audible.
Operating & Storage temperature: -30°C to +60°C (-22°F to +140°F).
Relative humidity: 10% to 90% non-condensing.
Shock: 2000 Gs RMS (maximum door-slam shock)
Compliance to FCC , Canadian, EMC requirements; for in ter fer ence FCC Class A digital apparatus.
KEYPAd
Bezel size: 2 5⁄8 "x 3 1⁄4 "
Material: Bezel–high impact ABS, Keypad–silicone rubber.
ESD Protection: 15KV.
Button operating life: 3-5 million cycles.
Button operating force: 3.88 ounces.
Operating temperature: -35°C to +55°C (-31°F to +131°F).
Storage temperature: -40°C to +55°C (-40°F to +131°F).
Sealing: Weatherproof gasket provides protection for outdoor use. (Usable in all environmental/exterior applications.)
EXIT HARDWARE SUPPORTED
• Adapts to Precision’s 1000 & 2000 series and Von Duprin 98/99 series
Devices supported:
– Rim device
– Surface vertical rod
– Concealed vertical rod
– Mortise
EXZ Keypad

45HZ 7 TV 14 MS 626 RH
Series Core Function Lever Trim Finish Door Options
Housing Code Style Style Hand
* Extra cost option. Must specify keymark and number of keys.
** Cost deduction.
C PrODuCtS
7
OrDEr PrOCEDurE
HZ – MorTisE
KZ – cYliNdricAl
93KZ 7 DV 14 MS STK 626
Backset Core Function Lever Rose Strike Finish Options
Housing Code Style Style Package
* Extra cost option. Must specify keymark and number of keys.
** Six-pin cylinder in Schlage “C” keyway included with 0B, KA, KD options. Must specify “6” for core housing.
*** Cylinder not included with COR, MED, SAR, SC , YAL, or SC RC options. Must specify “0” for core housing.
ordEr ProcEdurE
EXZ – EXiT HArdwArE
EXZ 7 EV 14 MS 626 RHR PH1 RM
Series Core Function Lever Trim Finish Door Manufacturer Locking Options
Housing Code Style Style Hand Type
* Extra cost option. Must specify keymark and number of keys
** EV function (key override) is not available on P 1000 (all models) Von Duprin (mortise type), or Sargent (rim type) device.
*** SA8– available (only) with rim type device.
Levers:
3**– solid tube/
w/return
12*– solid tube/
no return
14– curved
return
15– contour
angle return
16– curved
no return
17*– gull wing
Knobs:
4– round
EXZ–
Keypad EZ
0** –
keyless
7– 7 pin
housing;
accepts
all BEST
cores
EV– with
key**
V– w/out
key
14– curved
return
15– contour
angle return
KP– keypad 626 690
satin*
606 613
R RB
L RB
VD9– VonDuprin
98/99 series
PH1– Precision
hardware 1000
PH2– Precision
hardware 2000
SA8– Sargent
8000 series ***
RM– rim***
MO–mortise
RD– surface
& concealed
vertical rods
SH*–
security
head
screws
Thick
Door*–
specify
thickness
EXBB*– extended
life battery pack
(Battery door
available in 622
finish only)
SH*– security
head screws
Thick Door*–
specify thickness
TAC*– tactile lever
7/8" LTC*– flat lip
strike
0**–
keyless
7– 7 pin
housing;
accepts
all BEST
cores
45HZ– lever DV– latch
with key
TV– deadbolt
with key
LV– deadbolt
without key
V– latch
without key
KP– keypad
KPA– other cylinder
626 690
Satin*
606 612
613 619
Bright*
605 611
625
R
R RB
L
L RB
14– curved
return
15– contour
angle return
16– curved
no return
EXBB*– extended life battery pack
(Battery door available in 622
finish only)
LM– lost motion
SH*– security head screws
TAC*– tactile lever
3/4*– 3/4"throw latch
7/8" LTC*– flat lip strike
0B**– non-IC zero-bitted
KA**– non-IC keyed alike
KD**– non-IC keyed different
COR***– non-IC
Corbin-Russwin
MED***– non-IC Medeco
SAR***– non-IC Sargent
SCH***– non-IC Schlage
YAL***– non-IC Yale
SCHRC***– Schlage
0– keyless
6– 6 pin
non-IC cyl.
7– 7 pin
housing;
accepts
all BEST
cores
93KZ– 23/4"
94KZ*– 33/4"
95KZ*– 5"
DV– latch
with key
KP– keypad 626 690
Satin*
606 612
613 619
Bright*
605 611
625
STK–
standard
S3– ANSI

For more inform tion on St nley Security Solutions’ products, services, nd office loc tions visit our web site t www.st nleysecuritysolutions.com
Stanley Security Solutions, Inc.
6161 E. 75th Street Indianapolis, Indiana 46250
© 2011 Stanley Security Solutions, Inc. • www.stanleysecuritysolutions.com
Product inform tion cont ined in this c t log h s been com piled nd presented with s much c re nd com plete ness s is re son bly possible. Errors or
mist kes m y be present, nd in m ny c ses, reli nce h s been pl ced on inform tion supplied by other m nuf cturers which m y be in error or which m y
be subject to ch nges or mod i fi c tions by the m n u f c tur er with out no tice nd without oblig tion. Therefore, no gu r n tee c n be m de or should be
ssumed or implied with reg rds to product in for m tion con t ined in this c t log.
10M R311
BAS023
CORMAX™ PAtented KeYInG SYSteM
CORMAX™ PATENTED KEYING SYSTEM
BEST®CORMAX™is the premier p tented keying system offered by St nley Security Solutions.
CORMAX will meet your needs for security, key control, nd convenience. A simple solution
with no compromising llowed.
CORMAX is the upgr de p th for existing BEST St nd rd, Premium, nd MX8 customers;
nd it is n essenti l element of non-residenti l ccess control s security dministr tors
strive to elimin te the un uthorized duplic tion of keys.
CORMAX offers the following fe tures nd benefits:
• A long-term US utility p tent th t gu r ntees the extended useful life of the system through 2027.
• A second, independent locking mech nism th t utilizes p tented set of built-in side pins to provide higher security.
• Sever l levels of geogr phic l exclusivity, including n tion l exclusivity, re v il ble vi the p tented side pin fe ture.
• CORMAX cores nd keys re v il ble exclusively through St nley s les offices. Key bl nks re only sold to individu ls
uthorized by the customer to ensure key bl nks do not end up in the possession of un uthorized personnel either inside
or outside the customer’s f cility.
• CORMAX cores re certified to meet the security, s fety, nd reli bility requirements of BHMA A156.5 Gr de 1.
• Picking nd drilling resist nce options re v il ble if higher levels of security re desired.
• Complete f ctory m sterkeying service offered, nd t no ch rge with purch se of BEST locksets nd PHI exit devices.
• Keyw ys re org nized in f milies of four keyw ys e ch, with double-milled nd qu d-milled key levels to f cilit te the
design of m sterkey systems in multi-building c mpuses.
• BEST CORMAX cores re comp tible with ll existing BEST interch nge ble core housings, elimin ting the need for new
or modified locksets.
CORMAX™
Patented Keying System