Star SDW1 User manual

1
HEAVY DUTY DRAWER
STYLE FOOD WARMERS
MODELS
SDW1 SDW2 SDW3
SDW1N SDW2N SDW3N
SDW1W SDW2C SDW3C
SDW2W SDW2NC SDW3NC
Installation and
Operation
Instructions
2M-Z4061 Rev. C 9/27/2011
SDW3NC

2
2
These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.
Star reserves the right to change specications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specications contained in this sheet are subject to change
without notice. While Star International Holdings Inc., Company exercises
good faith efforts to provide information that is accurate, we are not
responsible for errors or omissions in information provided or conclusions
reached as a result of using the specications. By using the information
provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when
you call to ensure a faster service.
SAFETY SYMBOL
Model No.
Serial No.
Voltage
Purchase Date
Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:
Telephone: [phone]
Fax: [phone]
E-mail [email protected]
[email protected]
W[email protected]
Website: www.star-mfg.com
Service Help Desk
Authorized Service Agent Listing
Reference the listing provided with the unit
or
for an updated listing go to:
Website: www.star-mfg.com
E-mail [email protected]
Mailing Address: Star International Holdings Inc., Company
10 Sunnen Drive
St. Louis, MO 63143
U.S.A

3
SPECIFICATIONS
Model Voltage Hz Phase Watts Plug Dimensions
Length Depth Height
SDW1, SDW1W 120V 60
1ph
475 NEMA5-15P 29 1/4”
(74.3cm) 21 13/16” (55.4cm) 11 1/4”
(28.58cm)
220/240V 50/60 CEE 7/7
SDW1N 120V 60 403/475 NEMA5-15P 21 1/4”
(53.98cm) 29 13/16” (75.72cm)
220/240V 50/60 CEE 7/7
SDW2, SDW2C, SDW2W 120V 60 925 NEMA5-15P 29 1/4”
(74.3cm) 21 13/16” (55.4cm) 24 7/16”
(62.07cm)
220/240V 50/60 CEE 7/7
SDW2N, SDW2NC 120V 60 781/925 NEMA5-15P 21 1/4”
(53.98cm) 29 13/16” (75.72cm)
220/240V 50/60 CEE 7/7
SDW3, SDW3C 120V 60 1,375 NEMA5-15P 29 1/4”
(74.3cm) 21 13/16” (55.4cm) 34 5/8”
(78.94cm)
220/240V 50/60 1,159/1,1375 CEE 7/7
SDW3N, SDW3NC 120V 60 1,375 NEMA5-15P 21 1/4”
(53.98cm) 29 13/16” (75.72cm)
220/240V 50/60 1,159/1,1375 CEE 7/7
Note: “N” versions have the pan positioned with the 20” dimension front to back
Thisequipmentisdesignedandsoldforcommercialuseonlybypersonneltrainedandexperienced
in its operation and is not sold for consumer use in and around the home nor for use directly by
the general public in food service locations.
INSTALLATION AND OPERATING INSTRUCTIONS
These models are equipped for the voltage and wattage indicated on the nameplate. They are designed
to operate on alternating current, two wire single-phase service only. Athree wire grounding cord with a
three-prong attachment plug is provided.
DO NOT CONNECT TO DIRECT CURRENT (DC).
INSTALLATION
1. Single drawer units are supplied with 1” feet
pre-assembled to the unit. Two and three drawer units are supplied with 4” feet. These feet must
be assembled to the bottom of the unit once the shipping pallet has been removed. Do not install
without the feet provided. Contact the factory or one of its representatives for optional 4” feet for
single drawer units.
2. Placetheunitonaatlevelsurface.
3. Thoroughly clean the unit before placing it in service. Remove the drawer by extending it fully then
lifting slightly on the front of the drawer to clear the drawer stop. Replace the drawer by reversing
this procedure. See Figure 1.
4. Connect the power cord to the appropriate receptacle.
5. Units of the same series (either narrow or wide construction) can be stacked directly
on each other when the feet are removed. Do not stack more than four drawers high.
To prevent a tipping hazard do not open more than one heavily loaded drawer at a time. Do not
place more than 30 lbs. of food in each drawer.
DO NOT IMMERSE THE UNIT IN WATER. DO NOT USE PRESSURIZED WATER TO CLEAN
THE UNIT. DO NOT ALLOW ANY LIQUID TO ENTER THE CONTROL COMPARTMENT
THROUGH THE LOUVERED AIR OPENINGS.
CAUTION
WARNING
CAUTION
Figure 1

4
CLEANING
1. Disconnect the unit from the electrical power source before cleaning.
2. Allow the unit to cool thoroughly before cleaning. Avoid contact with the heated parts of the
unit.
3. Clean the unit daily. Use a soft cloth and mild detergent to keep the stainless steel panels
free of scratches. If an abrasive cleaner is used rub in the direction of the grain to prevent
unsightlyscratchestothenish.
OPERATION
1. Thetemperaturecontrolwillregulatetemperaturesinsidethedrawercavityandis adjustable
from 100° to 200°F. Pressing the ON/OFF button of the temperature control activates the
unit. This control will provide close regulation of the temperature in the drawer and give
an indication of the food temperature. The setpoint is displayed by pressing and holding
the TEMP button. Adjust the regulated temperature by pressing the + or – buttons while
holdingtheTEMPbuttondown. Theactualdrawertemperatureisdisplayedwhennobuttons
are pressed and the control is in the ON mode. The dot in the lower corner of the display
indicates when the control is calling for heat.
FOODTEMPERATUREWILLVARYFROMTHECONTROLSETTEMPERATUREBASEDON
THE MOISTURE CONTENT AND CONSISTENCY OF THE FOOD PRODUCT
2. Each drawer is equipped with a moisture control. Turn the black knob above the drawer
handle ¼ turn to the left to free the control adjustment. Slide the knob to align the holes in
the drawer front and vent any excess moisture to produce a crisp product. Position the knob
so that the holes are closed to produce a moist product.
Lock the control in position by turning the knob ¼ turn
to the right. Different combinations of food products
and heat settings will require different moisture
settings.  Breads and rolls are difcult to hold for
prolongedperiods of time because ofthe low moisture
content of the product. These products are best held
between 120° and 140°F. To retain the moisture of
these products place them in a plastic bag when in
the warmer. Time and experience is required to determine the optimum combination of
temperatureandmoisturesettingtoprovidea palatableproductthatwillholdforanextended
period of time.
3. Preheattheunitfor½hourbeforeplacingfoodinthewarmer. Thisunitisintendedtoholdhot
food at the proper serving temperature. Foods should be heated to the proper temperature
prior to being placed in the warmer. Most meat and poultry foods are best held between
160-175°F.
4. Optimumholdingtemperaturesforspecicfoodsarebasedontheproductsmoisturecontent,
product density, volume and proper serving temperature. Safe sanitary temperatures must
be considered when determining the length of time a product can be held and remain
palatable. Allow foods that are heated to extreme temperatures during preparation to cool
before being placed in the warmer to prevent the accumulation of excess condensation.
TOPREVENTATIPPINGHAZARDANDPOTENTIALBODILYINJURYDO NOTOPENMORE
THANONE HEAVILYLOADEDDRAWERATATIME. ITISNOTRECOMMENDEDTOPLACE
MORE THAN 30 LBS OF FOOD IN EACH DRAWER.
CAUTION
CAUTION

5
2M-4497-2 6/1312
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
ALL:
*Pop-Up Toasters
*Butter Dispensers
*Pretzel Merchandisers
(Model 16PD-A Only)
*Pastry Display Cabinets
*Nacho Chip Merchandisers
*Accessories of any kind
*Sneeze Guards
*Pizza Ovens
(Model PO12 Only)
*Heat Lamps
*Pumps-Manual
Visit our Website at: www.star-mfg.com Email: [email protected]
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which
the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation
company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited
to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair
of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken
to the closest Star service agency, transportation prepaid.
>Star will not assume any responsibility for loss of revenue.
>On all shipments outside the United States and Canada, see International Warranty.
*The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor.
*The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor.
*The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
*The warranty period for the Chrome-Max Griddles is ve (5) years on the griddle surface. See detailed warranty provided with unit.
*The warranty period for Teon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identiers and
point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.
>This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts
and ninety (90) days on labor.
>This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or
the Service Center's sub-agency.
>This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
>This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted.
SERVICES NOT COVERED BY WARRANTY
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
1. Travel time and mileage rendered beyond the 50 mile radius limit
2. Mileage and travel time on portable equipment (see below)
3. Labor to replace such items that can be replaced easily during a daily cleaning
routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
4. Installation of equipment
5. Damages due to improper installation
6. Damages from abuse or misuse
7. Operated contrary to the Operating and Installation Instructions
8. Cleaning of equipment
9. Seasoning of griddle plates
10. Voltage conversions
11. Gas conversions
12. Pilot light adjustment
13. Miscellaneous adjustments
14. Thermostat calibration and by-pass adjustment
15. Resetting of circuit breakers or safety controls or reset buttons
16. Replacement of bulbs
17. Replacement of fuses
18. Repair of damage created during transit, delivery, &
installation OR created by acts of God
*The Model 510FD, 510FF Fryer.
*The Model 526TOAToaster Oven.
*The Model J4R, 4 oz. Popcorn Machine.
*The Model 518CMA & 526CMA Cheese Melter.
*The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
*The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
*All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
*All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
*All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
*All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
*All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
*All Fast Steamer Models except Direct Connect Series.

6
MATERIAL
DR. DATE
FINISH
MODEL NO.
TITLE
PART NO.
TOLERANCES UNLESS OTHERWISE NOTED
FRACTIONS ± 1/64 DECIMALS ± .005 ANGLES ± 1° REVISIONS
CK.
LTR DATE DESCRIPTION OF CHANGE DR
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
STAR MANUFACTURING INTERNATIONAL INC.
ST. LOUIS, MO. 63143, USA
#10 SUNNEN DRIVE
TH
01-23-01 -----
-----
SDW1/2/3
WIRE DIAGRAM
SK1850
A4-17-01 PICTORIAL CHANGE
TH
B8/12/05 PICTORIAL CHANGE TO CLEARIFY WERE
WIRES GO TO AND FROM
CG
2
3CL
H
3
2
3
2
2
1C
L
2L
3
H
C
32
BLACK
230 VOLT VERSIONS TYPICAL
BLACK
BLACK
THERMISTER
THERMISTER
THERMISTER
NO
COM
E1
E2
N
THERMISTOR
NC
NO
COM
E1 E2 N
THERMISTOR
NC
NO
COM
E1 E2
N
THERMISTOR
NC
R

7
MATERIAL
DR. DATE
FINISH
MODEL NO.
TITLE
PART NO.
TOLERANCES UNLESS OTHERWISE NOTED
FRACTIONS ± 1/64 DECIMALS ± .005 ANGLES ± 1° REVISIONS
CK.
LTR DATE DESCRIPTION OF CHANGE DR
THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.
STAR MANUFACTURING INTERNATIONAL INC.
ST. LOUIS, MO. 63143, USA
#10 SUNNEN DRIVE
TH 01-23-01 -----
----- SDW2C/3C
WIRE DIAGRAM
SK1851
A4-17-01 PICTORIAL CHANGE TH B8/12/05 PICTORIAL CHANGE TO CLEARIFY WERE
WIRES GO TO ANF FROM CG
230 VOLT VERSIONS
2
1C
1
2
L
C
2
L
L
1
C
1 1
4
C
2
L
2C
L
BLACK
BLACK
THERMISTER
THERMISTER
THERMISTER
THERMISTER
THERMISTER
NO
COM
E1
E2
N
THERMISTOR
NC
NO
COM
E1
E2
N
THERMISTOR
NC
NO
COM
E1 E2
N
THERMISTOR
NC
NO
COM
E1
E2 N
THERMISTOR
NC
NO
COM
E1
E2
N
THERMISTOR
NC
R

8
MODEL - SDW1, SDW2, SDW3
CERTAIN INSTANCES MAY NOT BE AVAILABLE
ILLUSTRATIVE PURPOSES ONLYAND IN
SOME ITEMS ARE INCLUDED FOR
STAR MANUFACTURING INTERNATIONAL, INC.
SK1840 REV. B 12/12/2000
30
25
27
18
17
20
12
28
11
7
3
45
5 9
1
2
29
26
24
31
8
21
19
15
15A
13
6
14
16
34
22
23
12
33
32
DRAWER WARMER
MODEL SDW3 SHOWN
R
CAUTION HOT
OFF
TEMP
ON
6

9
PARTS LIST September 27, 2011, Rev. C
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star International Holdings Inc. Company
Model: SDW1, SDW2, SDW3, SDW1W, SDW2W, Drawer Warmer
Fig No Part No Qty Description Application
1E9-Z4031 1 TOP PANEL
2E9-Z4030 1 BACK PANEL SDW1 E9-Z4089 SDW2
E9-Z4097 SDW2
3E9-Z4027 1ADAPTER PLATE 120V 2E-Y9227 INLET 230V
2K-Y2967 CORD BUSHING 120V
4E9-DW0004 1/2/3 LINERASSEMBLY RIGHT SDW1 / SDW2 / SDW3
E9-DW0040 1/2 LINERASSEMBLY RIGHT SDW1W / SDW2W
5E9-Z3987 2/4/6 BEARING STIFFENER SDW1 / SDW2 / SDW3
6E9-Z4032 2 SIDE PANEL SDW1 E9-Z4090 SDW2
E9-Z4098 SDW3
7 E9-Z4022 1 TOP LINER
82N-Z4057 1/2/3 HEATING ELEMENT 120V SDW1 / SDW2 / SDW3
2N-Z4154 HEATING ELEMENT 230V
9A5-250027 1 LEAD IN CORD 120V
2E-Z0512 230V
10 E9-Z3986 1/2/3 SENSOR BRACKET SDW1 / SDW2 / SDW3
11 E9-DW0003 1/2/3 LINERASSEMBLY LT SDW1 / SDW2 / SDW3
E9-DW0039 1/2 SDW1W / SDW2W
12 2P-Z0315 8/16/24 GUIDE BEARING w/ SCREW SDW1 / SDW2 / SDW3
NI 2C-1810 8/16/24 WASHER SDW1 / SDW2 / SDW3
NI 2C-Z0498 8/16/24 NUT SDW1 / SDW2 / SDW3
13 E9-Z4009 1 BOTTOM LINER
14 E9-DW0002 1 BOTTOMASSEMBLY
15 2R-Z5846 4 FOOT
15A 2R-Y5092 4 4” FOOT SDW2, SDW3
16 E9-Z4001 1 FRONT PANEL SDW1 E9-Z4088 SDW2
E9-Z4096 SDW3
17 E9-DW0012 1 CONTROLPANELASSY SDW1 E9-DW0020 SDW2
E9-DW0022 SDW3
18 2K-Z1971 5CONTROLBOARD SPACER
19 E9-Z4078 1/2 GUSSET SDW2 / SDW3
20 2M-Z4067 1 GRAPHICS PANEL SDW1
21 E9-DW0011 1/2/3 DRAWER LINERASSEMBLY SDW1 / SDW2 / SDW3
22 E9-Z4050 1/2/3 DRAWER FRONT SDW1 / SDW2 / SDW3
23 2R-Y7557 1/2/3 DRAWER PULL SDW1 / SDW2 / SDW3
24 E9-DW0009 1/2/3 DAMPERASSEMBLY SDW1 / SDW2 / SDW3
25 E9-DW0010 1/2/3 DRAWERASSEMBLY SDW1 / SDW2 / SDW3
E9-DW0043 1/2 DRAWERASSEMBLY SDW1W / SDW2W
26 E9-DW0021 1/2 FRONTTRIMASSEMBLY SDW2 / SDW3

10
PARTS LIST September 27, 2011, Rev. C
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 2
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star International Holdings Inc. Company
Model: SDW1, SDW2, SDW3, SDW1W, SDW2W, Drawer Warmer
Fig No Part No Qty Description Application
27 2E-Z4062 1 CONTROL W/ SENSOR 120V
2E-Z4153 230V
28 E9-Z4016 1/2/3 ELEMENT BRACKET SDW1 / SDW2 / SDW3
29 E9-Z4026 1/2/3 REAR LINER SDW1 / SDW2 / SDW3
30 2D-Y6177 1/2/3 FULLSIZE PAN 6” SDW1 / SDW2 / SDW3
31 2R-Z4054 1/2/3 KNOB SDW1 / SDW2 / SDW3
32 E9-DW0030 1/2/3 DRAWER FRONT COMPLETE SDW1 / SDW2 / SDW3
33 E9-DW0031 1/2/3 DRAWER FRAME W/ROLLERS SDW1 / SDW2 / SDW3
E9-DW0042 1/2 SDW1W / SDW2W
32/33 E9-DW0029 1/2/3 DRAWERASSY COMPLETE SDW1 / SDW2 / SDW3
E9-DW0041 1/2 DRAWERASSY COMPLETE SDW1W / SDW2W
34 E9-Z7719 1/2 ELEMENT COVER SDW1W / SDW2W
N/A E9-Z4013 1 INSULATION SIDE SDW1
N/A E9-Z4092 SDW2
N/A E9-Z4100 SDW3
N/A E9-Z4014 1 INSULATION REAR SDW1
N/A E9-Z4093 SDW2
N/A E9-Z4101 SDW3
N/A E9-Z4012 2 INSULATION TOP/BOTTOM
N/A E9-Z4015 1/2/3 INSULATION DRAWER FRONT SDW1 / SDW2 / SDW3

11
STAR MANUFACTURING INTERNATIONAL, INC.
MODEL - SDW1N, SDW2N, SDW3N
CERTAIN INSTANCES MAY NOT BEAVAILABLE
ILLUSTRATIVE PURPOSES ONLY AND IN
SOME ITEMS ARE INCLUDED FOR
SK1838 REV. A 4/17/2001
DRAWER WARMER
MODEL SDW3N SHOWN
R
CAUTIONHOT
OFF
TEMP
ON
2
32
4
7
11
15A
15
29
24
30
26
18
19
33
22
21
17
20
23
31
16
31
28
27
13
34
9
7
6
3
1
5
8
14
35
25
36
12

12
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star International Holdings Inc. Company
Model: SDW1N, SDW2N, SDW3N, Drawer Warmer
Fig No Part No Qty Description Application
1 E9-Z3999 1 TOP PANEL
2 E9-Z3996 1/2/3 REAR LINER SDW1N / SDW2N / SDW3N
3 E9-Z4077 1 REAR LINER COVER SDW2N, SDW3N
4E9-Z3998 1 BACK PANEL SDW1N E9-Z4072 SDW2N
E9-Z4104 SDW3N
5 E9-Z3997 1 TOP LINER
62N-Z4057 1/2/3 HEATING ELEMENT 120V SDW1N / SDW2N / SDW3N
2N-Z4154 HEATING ELEMENT 230V
7E9-Z4027 1ADAPTER PLATE 120V 2E-Y9227 INLET 230V
2K-Y2967 CORD BUSHING 120V
8E9-DW0006 1/2/3 LINERASSEMBLY RIGHT SDW1N / SDW2N / SDW3N
9A5-250027 1 LEAD IN CORD 120V
2E-Z0512 230V
10 E9-Z3986 1/2/3 SENSOR BRACKET SDW1N / SDW2N / SDW3N
11 2K-8043 1/2/3 BUSHING SDW1N / SDW2N / SDW3N
12 E9-Z4000 2 SIDE PANEL SDW1N E9-Z4073 SDW2N
E9-Z4105 SDW3N
13 E9-Z3976 1 BOTTOM LINER
14 E9-DW0001 1 BOTTOMASSEMBLY
15 2R-Z5846 4 FOOT
15A 2R-Y5092 4 4” FOOT SDW2N, SDW3N
16 E9-Z4001 1 FRONT PANEL SDW1N E9-Z4088 SDW2N
E9-Z4096 SDW3N
17 2E-Z4062 1 CONTROL W/ SENSOR 120V
2E-Z4153 230V
18 E9-DW0012 1 CONTROLPANELASSY SDW1N E9-DW0020 SDW2N
E9-DW0022 SDW3N
19 2M-Z4067 1 GRAPHICS PANEL SDW1N
20 2K-Z1971 5 CONTROL BOARD SPACER
21 E9-Z4078 1/2 GUSSET SDW2N / SDW3N
22 E9-DW0007 1/2/3 DRAWERASSEMBLY SDW1N / SDW2N / SDW3N
23 2P-Z0315 8/16/24 GUIDE BEARING SDW1N / SDW2N / SDW3N
NI 2C-1810 8/16/24 WASHER SDW1N / SDW2N / SDW3N
NI 2C-Z0498 8/16/24 NUT SDW1N / SDW2N / SDW3N
24 E9-Z3987 2/4/6 BEARING STIFFENER SDW1N / SDW2N / SDW3N
25 2D-Y6177 1/2/3 FULLSIZE PAN 6” SDW1N / SDW2N / SDW3N
26 E9-DW0009 1/2/3 DAMPERASSEMBLY SDW1N / SDW2N / SDW3N
27 E9-DW0008 1/2/3 DRAWER LINERASSEMBLY SDW1N / SDW2N / SDW3N
28 E9-Z4049 1/2/3 DRAWER FRONT SDW1N / SDW2N / SDW3N
PARTS LIST September 27, 2011, Rev. C

13
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 2
INCLUDE MODEL AND SERIAL NUMBER OF 2
Some items are included for illustrative purposes only and in certain instances may not be available.
Star International Holdings Inc. Company
Model: SDW1N, SDW2N, SDW3N, Drawer Warmer
Fig No Part No Qty Description Application
29 2R-Y7557 1/2/3 DRAWER PULL SDW1N / SDW2N / SDW3N
30 E9-Z3985 2/4/6 ELEMENT BRACKET SDW1N / SDW2N / SDW3N
31 E9-DW0019 1/2 FRONTTRIMASSEMBLY SDW2N / SDW3N
32 E9-DW0005 1/2/3 LINERASSEMBLY LT SDW1N / SDW2N / SDW3N
33 2R-Z4054 1/2/3 KNOB SDW1N / SDW2N / SDW3N
34 E9-Z4260 1 SIDE STIFFENER
35 E9-DW0033 1/2/3 DRAWER FRONT COMPLETE SDW1N / SDW2N / SDW3N
36 E9-DW0034 1/2/3 DRAWER FRAME W/ROLLERS SDW1N / SDW2N / SDW3N
35/36 E9-DW0032 1/2/3 DRAWERASSY COMPLETE SDW1N / SDW2N / SDW3N
N/A E9-Z3978 1 INSULATION SIDE SDW1N
N/A E9-Z4079 SDW2N
N/A E9-Z4107 SDW3N
N/A E9-Z3979 1 INSULATION REAR SDW1N
N/A E9-Z4080 SDW2N
N/A E9-Z4108 SDW3N
N/A E9-Z3981 1 INSULATION TOP
N/A E9-Z3977 1 INSULATION BOTTOM
N/A E9-Z3980 1/2/3 INSULATION DRAWER FRONT SDW1N / SDW2N / SDW3N
PARTS LIST September 27, 2011, Rev. C

14
STAR MANUFACTURING INTERNATIONAL, INC.
MODEL - SDW2NC, SDW3NC
CERTAIN INSTANCES MAY NOT BE AVAILABLE
ILLUSTRATIVE PURPOSES ONLY AND IN
SOME ITEMS ARE INCLUDED FOR
SK1839 REV. A 4/17/01
DRAWER WARMER
MODEL SDW3NC SHOWN
R
CAUTIONHOT
OFF
TEMP
ON
OFF
TEMP
ON
OFF
TEMP
ON
1
12
2
3
9
7
9
4
13
25
35
34
31
14
24 24
26
32
28 27
29
30
23
18A
17
18
22 21 20
19
10 11
833
6
5
16

15
Star International Holdings Inc. Company
PARTS LIST September 27, 2011, Rev. C
Model: SDW2NC, SDW3NC Drawer Warmer
Fig No Part No Qty Description Application
1 E9-Z3999 1 TOP PANEL
2 E9-Z3996 2/3 REAR LINER SDW2NC / SDW3NC
3E9-Z4072 1 BACK PANEL SDW2NC
E9-Z4104 SDW3NC
4 E9-Z3997 1 TOP LINER
5E9-Z4027 1 ADAPTER PLATE 120V 2K-Y2967 CORD BUSHING 120V
2E-Y9227 INLET 230V
6A5-250027 1 LEAD IN CORD 120V
2E-Z0512 230V
7E9-DW0006 2/3 LINERASSEMBLY RIGHT SDW2NC / SDW3NC
82K-8043 2/3 BUSHING SDW2NC / SDW3NC
9E9-Z4073 2 SIDE PANEL SDW2NC
E9-Z4105 SDW3NC
10 E9-Z3987 4/6 BEARING STIFFENER SDW2NC / SDW3NC
11 E9-Z3986 2/3 SENSOR BRACKET SDW2NC / SDW3NC
12 E9-Z3976 2/3 BOTTOM LINER SDW2NC / SDW3NC
13 2N-Z4057 2/3 HEATING ELEMENT 120V SDW2NC / SDW3NC
2N-Z4154 HEATING ELEMENT 230V SDW2NC / SDW3NC
14 E9-DW0005 2/3 LINERASSEMBLY LT SDW2NC / SDW3NC
15 E9-Z4114 1/2 DIVIDER PANEL NARROW SDW2NC / SDW3NC
16 2R-Y5092 4 4” FOOT
17 EP-DW0023 1 CONTROLPANELASSY SDW2NC
E9-DW0024 SDW3NC
18 2M-Z4247 1/2 GRAPHICS PANEL SDW2NC / SDW3NC
19 E9-Z4078 1/2 GUSSET SDW2NC / SDW3NC
20 E9-Z4088 1 FRONT PANEL SDW2NC
E9-Z4096 SDW3NC
21 2E-Z4062 2/3 CONTROLW/ SENSOR 120V SDW2NC / SDW3NC
2E-Z4153 CONTROLW/ SENSOR 230V SDW2NC / SDW3NC
22 2K-Z1971 10/15 CONTROLBOARD SPACER SDW2NC / SDW3NC
23 E9-DW0007 2/3 DRAWERASSEMBLY SDW2NC / SDW3NC
24 2P-Z0315 16/24 GUIDE BEARING SDW2NC / SDW3NC2C-1810 16/24 WASHER
2C-Z0498 16/24 NUT
25 2D-Y6177 2/3 FULLSIZE PAN 6” SDW2NC / SDW3NC
26 E9-DW0009 2/3 DAMPERASSEMBLY SDW2NC / SDW3NC
27 E9-DW0008 2/3 DRAWER LINERASSEMBLY SDW2NC / SDW3NC
28 E9-Z4049 2/3 DRAWER FRONT SDW2NC / SDW3NC
29 2R-Y7557 2/3 DRAWER PULL SDW2NC / SDW3NC
30 E9-Z3985 4/6 ELEMENT BRACKET SDW2NC / SDW3NC
31 E9-DW0001 1 BOTTOMASSEMBLY
32 2R-Z4054 2/3 KNOB SDW2NC / SDW3NC
33 E9-Z4260 1 SIDE STIFFENER
34 E9-DW0033 2/3 DRAWER FRONTASSY COMPLETE SDW2NC / SDW3NC
35 E9-DW0034 2/3 DRAWER FRAME W/ROLLERS SDW2NC / SDW3NC
34/35 E9-DW0032 2/3 DRAWERASSY COMPLETE SDW2NC / SDW3NC
N/A E9-Z4079 1 INSULATION SIDE SDW2NC
N/A E9-Z4107 SDW3NC
N/A E9-Z4080 1 INSULATION REAR SDW2NC
N/A E9-Z4108 SDW3NC
N/A E9-Z3981 1 INSULATION TOP
N/A E9-Z3977 2/3 INSULATION BOTTOM SDW2NC / SDW3NC
N/A E9-Z3980 2/3 INSULATION DRAWER FRONT SDW2NC / SDW3NC

16
STAR MANUFACTURING INTERNATIONAL, INC.
MODEL - SDW2C, SDW3C
CERTAIN INSTANCES MAY NOT BE AVAILABLE
ILLUSTRATIVE PURPOSES ONLYAND IN
SOME ITEMS ARE INCLUDED FOR
SK1841 REV. A 4/17/01
DRAWER WARMER
MODEL SDW3C SHOWN
OFF
TEMP
ON
OFF
TEMP
ON
R
OFF
TEMP
ON
3
29
24
18 15 16
9
5
10
8
28
26
13
11
14
17 31
21
22
20
19
23 20A
24 26
12
2
11
1
6
30
27
33
32 30
7
4

17
PARTS LIST May 7, 2010, Rev. C
Star International Holdings Inc. Company
PARTS LIST September 27, 2011, Rev. C
Model: SDW2C, SDW3C Drawer Warmer
Fig No Part No Qty Description Application
1E9-Z4031 1 TOP PANEL
2 E9-Z4022 1 TOP LINER
32N-Z4057 2/3 HEATING ELEMENT 120V
2N-Z4154 230V
4E9-Z4089 1 BACK PANEL SDW2C
E9-Z4097 SDW3C
5E9-Z4027 1ADAPTER PLATE 120V 2K-Y2967 CORD BUSHING
2E-Y9227 INLET 230V
6 E9-Z4113 1/2 DIVIDER PANEL SDW2C / SDW3C
7E9-DW0004 2/3 LINERASSEMBLY RIGHT SDW2C / SDW3C
8E9-Z3987 4/6 BEARING STIFFENER SDW2C / SDW3C
9A5-250027 1 LEAD IN CORD 120V
2E-Z0512 230V
10 E9-Z3986 2/3 SENSOR BRACKET SDW2C / SDW3C
11 E9-Z4026 2/3 REAR LINER SDW2C / SDW3C
12 2R-Z4054 2/3 KNOB SDW2C / SDW3C
13 E9-Z4009 2/3 BOTTOM LINER SDW2C / SDW3C
14 E9-DW0002 1 BOTTOMASSEMBLY
15 E9-Z4078 1/2 GUSSET SDW2C / SDW3C
16 EP-DW0023 1 CONTROLPANELASSY SDW2C
E9-DW0024 SDW3C
17 2E-Z4062 2/3 CONTROLW/ SENSOR 120V
2E-Z4153 230V
18 2K-Z1971 10/15 CONTROLBOARD SPACER SDW2C / SDW3C
19 E9-Z4088 1 FRONT PANEL SDW2C
E9-Z4096 SDW3C
20 2M-Z4247 1/2 GRAPHICS PANEL SDW2C / SDW3C
21 E9-DW0011 2/3 DRAWER LINERASSEMBLY SDW2C / SDW3C
22 E9-Z4050 2/3 DRAWER FRONT SDW2C / SDW3C
23 2R-Y7557 2/3 DRAWER PULL SDW2C / SDW3C
24 E9-DW0009 2/3 DAMPERASSEMBLY SDW2C / SDW3C
25 E9-DW0010 2/3 DRAWERASSEMBLY SDW2C / SDW3C
26 2P-Z0315 16/24 GUIDE BEARING SDW2C / SDW3CNI 2C-1810 WASHER
NI 2C-Z0498 NUT
27 2D-Y6177 2/3 FULLSIZE PAN 6” SDW2C / SDW3C
28 E9-Z4016 2/3 ELEMENTBRACKET SDW2C / SDW3C
29 E9-DW0003 2/3 LINERASSEMBLY LT SDW2C / SDW3C
30 E9-Z4090 2 SIDE PANEL SDW2C
E9-Z4098 SDW3C
31 2R-Y5092 4 4” FOOT
32 E9-DW0030 2/3 DRAWER FRONT COMPLETE SDW2C / SDW3C
33 E9-DW0031 2/3 DRAWER FRAME W/ROLLERS SDW2C / SDW3C
32/33 E9-DW0029 2/3 DRAWERASSEMBLY COMPLETE SDW2C / SDW3C
N/A E9-Z4092 1 INSULATION SIDE SDW2C
N/A E9-Z4100 1 INSULATION SIDE SDW3C
N/A E9-Z4093 1 INSULATION REAR SDW2C
N/A E9-Z4101 1 INSULATION REAR SDW3C
N/A E9-Z4012 3/4 INSULATION TOP/BOTTOM SDW2C / SDW3C
N/A E9-Z4015 2/3 INSULATION DRAWER FRONT SDW2C / SDW3C

18

19

20
STAR INTERNATIONAL HOLDINGS INC. COMPANY
Star - Holman - Lang - Wells - Bloomeld - Toastmaster
10 Sunnen Drive, St. Louis, MO 63143 U.S.A.
[phone]
www.star-mfg.com