StarTech.com HSB13SATSASB User manual

Manual Revision: 05/08/2017
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/HSB13SATSASB.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
HSB13SATSASB
3.5” SATA/SAS Hard Drive Mobile Rack
for 5.25” Bay - Trayless
*actual product may vary from photos

Instruction manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction manual
i
Table of Contents
Product diagram ....................................................................................1
Front view .................................................................................................................................................... 1
Rear view...................................................................................................................................................... 1
Package contents ...................................................................................2
Requirements .........................................................................................2
About the LED indicators......................................................................2
Install the mobile rack...........................................................................3
Install a hard drive .................................................................................4
Remove a hard drive..............................................................................4
Technical support...................................................................................5
Warranty information............................................................................5

Instruction manual
1
Product diagram
Front view
Activity LED
Power LED
Security lock Door
Rear view
SATA or SAS
power connector
LED connector
SATA or SAS data
connector

Instruction manual
2
Package contents
• 1 x mobile rack
• 2 x keys
• 4 x backplane-mounting screws
• 1 x SATA/SAS data cable
• 1 x Molex to SATA and LED cable
• 1 x SATA to SATA and LED cable
• 1 x quick-start guide
Requirements
• 1 x 5.25” drive bay
• 1 x 3.5” SATA or SAS hard drive
Requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/HSB13SATSASB.
About the LED indicators
The HSB13SATSASB features two LED indicators located on the front of the mobile
rack, to the left of the door.
LED LED behavior Signicance
Power LED, blue LED is illuminated Mobile rack is
receiving power
Activity LED, red LED is blinking Computer system is
accessing the hard drive

Instruction manual
3
Install the mobile rack
Warning! Always handle storage devices with caution. Make sure that you’re properly
grounded by wearing an anti-static strap when you install any computer component.
If an anti-static strap isn’t available, touch a large, grounded metal surface for several
seconds to discharge any built-up static electricity.
1. Turn o your computer and any devices or peripherals that are connected to it.
2. Unplug the power cable from the back of your computer.
3. Disconnect any peripheral devices that are connected to your computer.
4. Open your computer case. For more information about how to do this, consult the
documentation that came with your computer system.
5. Remove the cover of a 5.25”drive bay.
6. Insert the mobile rack into the drive bay slot, making sure that the screw holes on
the mobile rack are aligned with the holes in the drive bay.
7. If necessary, use the provided screws to secure the mobile rack to the drive bay.
8. Do one of the following to connect the mobile rack to the computer’s power
supply:
• Connect the Molex to SATA and LED cable to the SATA or SAS power
connector on the mobile rack and to the power supply.
• Connect the SATA to SATA and LED cable to the SATA or SAS power
connector on the mobile rack and to the power supply.
9. Connect the LED cable to the LED connector on the mobile rack.
10. Connect the SATA/SAS data cable to the SATA or SAS data connector on the
mobile rack and to a SATA or SAS port on the computer motherboard or controller
card.
11. Place the cover back onto your computer case.
12. Reconnect the power cable to the back of your computer.
13. Reconnect any devices or peripherals that were connected to your computer.
14. Turn on your computer.

Instruction manual
4
Install a hard drive
Warning! Drives should be handled carefully, especially when you transport them. If
you’re not careful with your drives, you may experience lost or corrupted data.
1. Open the Door on the mobile rack.
2. Position the hard drive so that the label faces upwards and the rear panel of the
hard drive is aimed towards the inside of the computer.
3. Gently push the hard drive into the mobile rack until the Door begins to close.
4. Close the Door on the mobile rack and make sure that it clicks shut.
Warning! Do not forcibly close the Door on the mobile rack. If you encounter
resistance when you try to close the Door, the hard drive could be inserted incorrectly.
Remove the hard drive and make sure that it’s inserted correctly.
5. To lock the hard drive in the mobile rack, insert the provided key into the Security
lock and turn the key counterclockwise 90°, and then remove the key.
Remove a hard drive
Warning! If the Activity LED on the front of the mobile rack is blinking, do not remove
the hard drive. Wait until the LED stops blinking and then remove the hard drive from
the mobile rack.
1. If the Door on the mobile rack is locked, insert the provided key into the Security
lock and turn the key clockwise 90°, and then remove the key.
2. Open the Door on the mobile rack and make sure that it’s out of the way of the
hard drive.
3. Slowly pull the hard drive out of the mobile rack.
4. Close the Door on the mobile rack.

Instruction manual
5
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.