StarTech.com PCI1PECPDV User manual

PCI Parallel Card
PCI1PECPDV Instruction Manual
Actual product may vary from photo
1 Port Parallel Dual Voltage / Dual Profile PCI Card

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other
Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and
do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company in
question. Regardless of any direct acknowledgement elsewhere in the body of this
document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.
Instruction Manual

Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Warranty information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Instruction Manual
i

Introduction
Thank you for purchasing a StarTech.com PCI Parallel Card. This card will allow you to
add DB25 connectivity for optimized performance from your parallel devices, such as
printers, scanners and more.
Features
• PCI 2.2 compliant
• PCI Power Management 1.0 compliant
• Offers data transfer rates of up to 1.5MB/Sec
Before you Begin
Contents
• PCI Parallel Card(1)
• Instruction Manual(1)
• Driver CD(1)
System Requirements
• Windows NT4, 95 / 98 / ME / 2000 / XP
• Pentium-class computer with an available PCI or PCI-X slot
Instruction Manual
1

IInnssttaallllaattiioonn
This section will guide you through the installation of your PCI card and the related
software. Please read through the instructions carefully and complete each step in the
order listed.
Inst alling the Card
1. Shut down all power connected to the computer, as well as all devices connected to
the computer peripherally (i.e. Printers, Monitors, Scanners etc.). As an added step to
ensure safe installation, unplug the power supply from the computer.
2. Remove the computer cover. For more detailed instruction on how to perform this
step, please refer to the documentation that was included with your computer at the
time of purchase.
3. Locate an empty PCI slot (as illustrated in Figure 1-1), removing the metal bracket
covering the accompanying empty port/socket.
4. Position the serial card above the open PCI slot, ensuring that the card is aligned with
the entire slot. Insert the card firmly into the slot, distributing force evenly across the
length of the board. Once inserted, secure the card into the adjoining socket
(previously covered by metal bracket), using the correct size screw (please consult
documentation that accompanied purchase of computer).
5. Replace the computer cover and re-connect all power to the computer.
Installing the Drivers
Upon rebooting the computer, Windows will detect the newly installed card, and launch
the Found New Hardware Wizard.
Windows XP
Instruction Manual
2
1. When the Found New Hardware
Wizard appears, select Install the
software automatically (recommended).
Insert the Driver CD, then click Next.

4. Windows will notify you once the driver
installation has completed. Please click
Finish.
You will be required to follow steps #1-4 again, following the initial installation. Please
repeat these steps to conclude the installation process.
Instruction Manual
3
2. The next screen will prompt you to locate the
necessary files for installation. Please select
Search for the best drivers in this location,
place a checkmark next to Include this
location in the search, and specify the
location of the file to be installed. Click Next to
advance.
3. If you receive a notification that the drivers you
are installing have not yet passed Windows
Logo Testing, please click on Continue
Anyway, followed by Finish. Please note that
the software included with PCI1PECPDV
has been thoroughly tested for stability and
compatibility.

Verifying installation
Parallel Port Address configuration
Some parallel devices require a specific port designation, in order for the devices to
function properly. If your peripherals are functioning correctly with the newly installed
ports, there is no need to modify the parallel port address. However, if you are
experiencing difficulties:
Windows 95/98 Installation
Upon rebooting your computer following the installation of the PCI Parallel card, Windows
will detect the card and launch the Add New Hardware Wizard, and offer to install the
PCI Serial Controller.
1. Select Search for the best driver for your device (recommended). Insert the Driver
CD, and click Next.
2. Place a check next to CD-ROM Drive, remove all other check marks, and click Next.
Instruction Manual
4
To verify that the installation has completed successfully
and that the newly installed port is now available:
1. Right click on My Computer, left-click on Manage.
Select Device Manager.
2. Click on the [+] sign next to Ports (COM & LPT).
Here, you should see the newly installed parallel port:
1. From the Device Manager window, double-click
Ports (COM & LPT), then double-click on
0X16PCI952 PCI Parallel port (Windows
XP)(LPT3).
2. Select the Port Settings tab.
3. At the LPT Port Number box, click on the down
arrow and select an LPT port that is not in use:
Following this selection, please click on
OK to save your changes.

3. Windows should automatically locate the correct file to install. Please click Next.
4. Windows will then build a driver installation database. Following this, you will be
notified that Windows has finished installing the software that your new hardware
device requires. Please click Finish.
Please note that you will be required to follow these steps once more, following the initial
installation.
Verifying installation
To verify that the installation has completed successfully and that the newly installed port
is now available:
1. Click on the Start button. Click on Settings. Enter the Control Panel, and double-click
on the System icon. Select the Device Manager tab, and click on the [+] sign next to
Ports (COM & LPT), where you will see StarTech.com PCI listed.
Parallel Port configuration
From the Device Manager window, double-click on StarTech.com PCI to open the port
Properties window. Click on the Settings tab to make any adjustments.
Please note: Unless you are experiencing difficulties using your peripheral devices with
the installed port, there will be no need to make any changes to the
properties of the port.
Instruction Manual
5

SSppeecciiffiiccaattiioonnss
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide
industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
Warranty Information
This product is backed by a lifetime warranty. In addition, StarTech.com warrants its
products against defects in materials and workmanship for the periods noted, following
the initial date of purchase. During this period, the products may be returned for repair, or
replacement with equivalent products at our discretion. The warranty covers parts and
labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement
may not apply to you.
Instruction Manual
6
Revised: 17 November 2006 (Rev. A)
Bus Type PCI 5V / PCI-X 3.3V
Connectors 1 x DB25 Female Parallel Connector
Maximum Data Transfer Rate 1.5 Mbps
Chipset OX16PCI1952
OS Support Supports Windows NT4, 95 / 98 / ME / 2000 / XP