StarTech.com PEXSATA22I System manual

2 Port PCI Express Internal SATA II Controller Card
StarTech ID: PEXSATA22I
This 2 Port PCI Express Internal Serial ATA Controller Card adds two internal SATA II (SATA /300) ports to a
computer through simple installation into an available x1 PCI Express slot.
Supporting data transfer speeds of up to 3.0 Gbps, the SATA controller card features Native Command Queuing
support to ensure optimum performance.
Using a native PCI Express single chipset, the internal SATA controller card provides enhanced compatibility,
reliability and performance for your storage needs.
The controller card includes both standard form factor and low profile brackets, allowing you to add SATA capability
to virtually any PCI Express enabled computer, regardless of the case form factor
Applications
Add internal SATA capabilities for high speed storage to a workstation or server
Upgrade from slower external connection methods to native SATA connectivity
Expand on a full or low profile/small form factor (SFF) computer's storage capabilities
intrl.startech.com

Features
2 internal SATA ports
48-bit Logical Block Addressing (LBA)
Boot ROM enabled
Drive Hot-Plugging support
Support for Native Command Queuing
Fully compliant with the Serial ATA 1.0 specifications with transfer rates up to 3.0Gbps
Uses native PCI Express single chipset
Includes a Low Profile installation bracket
intrl.startech.com

Technical Specifications
Warranty Lifetime
Ports 2
Interface SATA
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID JMicron - JMB366
Connector Type(s) 1 - PCI Express x1 Male
Internal Ports 2 - SATA (7 pin; Data) Plug
Maximum Data
Transfer Rate
3Gbps
Type and Rate SATA II (3 Gbps)
Port Multiplier No
RAID Yes
Supported RAID
Modes
JBOD - (Just a Bunch of Disks)
Supported RAID
Modes
RAID 0 (Striped Disks)
Supported RAID
Modes
RAID 1 (Mirrored Disks)
OS Compatibility Windows 2000/ XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/
7(32/64-bit)/ 8(32/64-bit)
Linux
Product Length 4 in [102 mm]
Product Width 4.7 in [120 mm]
Product Height 0.8 in [20 mm]
Product Weight 1.6 oz [44.2 g]
Note 2.0 compliant/compatible with 2.0 slots for PCI Express
Shipping (Package)
Weight
0.3 lb [0.1 kg]
Included in Package 1 - PCI Express SATA Card
Included in Package 1 - Full Profile Bracket
Included in Package 1 - Driver CD
Included in Package 1 - Instruction Manual
intrl.startech.com

Certifications, Reports and Compatibility
intrl.startech.com