StarTech.com PCIUSB7 User manual

PCI USB Adapter Card
7 Port PCI High-Speed USB 2.0
Adapter Card
PCIUSB7
Instruction Manual

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Connect the equipment into an outlet on a circuit different from that to which the receiver•
is connected.
Consult the dealer or an experienced radio/TV technician for help.•
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an
endorsement of the product(s) to which this manual applies by the third-party company
in question. Regardless of any direct acknowledgement elsewhere in the body of
this document, StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this
manual and related documents are the property of their respective holders.

i
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements .................................................................1
Installation....................................................................... 2
Hardware Installation...................................................................2
Driver Installation.........................................................................2
Verifying Installation.....................................................................3
Specifications.................................................................. 4
Technical Support........................................................... 5
Warranty Information...................................................... 5

1
Introduction
This PCI-based High Speed USB 2.0 Adapter Card adds seven USB
2.0 ports (1 internal USB A Female, 2 internal USB motherboard
header, and 4 external USB A Female) to your PCI-capable PC.
Packaging Contents
1 x PCIUSB7 adapter card•
1 x Driver CD•
1 x Instruction Manual•
System Requirements
PCI enabled computer system•
Microsoft Windows• ®98SE/ME/2000/XP/Vista/7 or Linux®
9-pin USB
Header
Internal
USB A
port
External
USB A
ports

2
Installation
WARNING! PCI cards, like all computer equipment, can be severely
damaged by static electricity. Be sure that you are properly grounded
before opening your computer case or touching your PCI card.
StarTech.com recommends that you wear an anti-static strap when
installing any computer component. If an anti-static strap is unavailable,
discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several
seconds. Also be careful to handle the PCI card by its edges and not
the gold connectors.
Hardware Installation
Turn your computer off and any peripherals connected to the1.
computer (ie. Printers, external hard drives, etc.). Unplug the power
cable from the rear of the power supply on the back of the computer.
Remove the cover from the computer case.2.
Locate an open PCI or PCI-X slot and remove the metal cover plate3.
on the rear of the computer case.
Insert the card into the open PCI or PCI-X slot and screw the bracket4.
to the rear of the case.
Attach any internal USB connections to the cards internal USB A5.
port or USB header connectors.
Place the cover back onto the computer.6.
Insert the power cable into the socket on the power supply.7.
Driver Installation
Windows 2000/XP/Vista/7, Linux
No driver installation is required for these operating systems, as this
adapter card is natively supported, so the drivers are already installed.

3
Verifying Installation
Windows 2000/XP/Vista/7
From the main desktop, right-click on “My Computer” (“Computer”
in Vista/7), then select Manage. In the new Computer Management
window, select Device Manager from the left window panel.
There should be new “VIA” devices listed under the “Universal Serial
Bus Controllers” category.

4
Specications
Bus Interface PCI (3.3/5V)
USB Specification EHCI 0.95
UHCI 1.1
Connectors
4 x USB type A (External)
1 x USB type A (Internal)
1 x 9-pin USB Header (internal)
Chipset VIA VT6212L
Maximum Data Transfer Rate 480Mb/s
Compatible Operating
Systems
Windows 98SE/ME/2000/XP/
Vista/7, Linux

5
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.

StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Server
Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
Visit www.startech.com today for complete information about all
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.