StarTech.com IES101002SFP User manual

DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 08/07/2015
For the most up-to-date information, please visit: www.startech.com
Quick Start Guide
Packaging Contents
IES101002SFP
10 Port L2 Managed Gigabit Ethernet Switch with 2 Open SFP Slots - Rack Mountable
• 1 x 10 Port Gigabit Ethernet Switch
• 2 x Mounting Brackets
• 3 x Power Cords (NA/UK/EU)
• 1 x Instructional Manual (CD)
• 1 x Quick Start Guide LED Indicators
Rack Mounting
LED Status Description
Power ON System ON
OFF System OFF
Link/ACT
Flashing Link and Data
Activating
OFF Port is disabled or
disconnected
Installation
1. Attach the included Mounting Brackets to both sides of the
switch using the screws provided.
2. Install into your rack using the appropriate screws / cage nuts for
your rack (not included).
*actual product may vary from photos
Reset Button 10/100/1000 Mbps
LAN Ports
Console
Port
100/1000
Mbps
SFP Slots
Hardware Installation
Default Settings
1. Plug the power cord into the switch and connect to an available
power outlet.
2. Connect an Ethernet cable from the computer you are using to
congure the switch to any of the LAN ports on the front of
the switch.
3. Install your desired MSA-Compliant SFP modules into the available
SFP slots if needed.
IP Address: 192.168.2.1
Username / Password: admin / blank (no password)

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Initial Conguration
1. Congure a PC to be on the same subnet as the switch (e.g.
192.168.2.2 – 254).
2. Open your preferred web browser and enter the IP address
192.168.2.1 into the address bar, then press Enter.
3. Enter your Username / Password to login to the web interface
(Default: admin / blank).
4. The default page after a successful login is the Port State page.
When the port image is green, it means this port is connected.
Auto-refresh mode is disabled by default. If enabled, it will
update the current port state every 5 seconds. Or you can click
the Refresh button in the top right corner to update the states
manually. Clicking each port image will open detailed statistics of
the selected port.
Note: To restrict access to the web interface of the switch, it is
recommended to congure a password, which can be done by
selecting Conguration -> Security -> Switch from the menu. Click
Save to apply the changes.
For complete operating instructions / specications, please visit
www.startech.com/IES101002SFP
5. Use the menu down the left pane to navigate to, and congure
your desired network settings.