
1. With the unit off, unplug the power
cord from the wall outlet and remove
the cassette and reservoir from the
unit.
2. Remove the water filter or water bypass
cartridge (if the unit is using distilled
water) from the reservoir area.
3. Remove the eight screws across the
bottom front of the unit using a Philips
screw driver.
4. Push the cover forward from the back a
little to loosen it, until it stops.
5. Detach the LCD/keypad by reaching
up inside the cover through the
armature opening to feel for a plastic
tab located directly behind the
Rubber and Plastics key.
Statim 7000 Cover Removal