Steamfast SF-710 User manual

MINI STEAM IRON
OWNER’S GUIDE
SF-710

2 |ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered
part of the product. They contain important information about
safety, use and disposal. Before using the product, please
familiarize yourself with all operating and safety instructions.
Please keep all documents for future reference and pass these
documents on, together with the product, to any future owner.
See steamfast.com to view, download and print the most current
version of these instructions.
INTENDED USE: This product is intended to be used indoors
for ironing and garment steaming in the United States. This
product is not intended for commercial or industrial use. The
manufacturer assumes no responsibility for damage or injury due
to unauthorized use or product modication. Failure to follow
these directions will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation,
cleaning and maintenance of this product by children age
12 and younger and anyone with reduced physical, sensory
or mental capabilities. Children should be supervised to
ensure that they do not play with the appliance, its parts and
packaging material.
Directions to reduce risk of re, electrical shock, and injury:
When using your appliance, basic precautions should always be
followed, including the following:
- Read all instructions before use.
- Use caution when handling this steam iron. Burns could
occur from touching hot metal parts, hot water, or steam. Use
special care to avoid contact with hot water when turning the

ENGLISH |3
product upside down to empty the reservoir.
- To reduce the risk of contact with hot water, test whether
steam is ready before each use while carefully holding the
product away from your body. If no steam appears, wait a few
more minutes and test again. Do not look into the appliance,
use your hands or other objects to check for steam.
- Do not leave appliance unattended while connected.
- To reduce the risk of electric shock, do not immerse the
appliance in water or other liquids.
- When placing the iron on its stand, ensure the surface on
which the stand is placed is stable.
- Unit is only meant to be used with recomended accessories.
Using other types of attachments may cause damage to unit
or injury.
- Always disconnect appliance from electrical outlet when lling
with water or emptying, and when not in use.
- Always turn the iron OFF before plugging in or unplugging
the iron from the electrical outlet.
- Do not allow cord to touch hot surfaces. Let appliance cool
completely before putting away. Wrap cord with supplied
"hook and loop" fastener when storing.
- Never yank cord to disconnect from outlet. Instead, grasp just
the plug and pull todisconnect.
- Do not operate appliance with a damaged cord, or if the
appliance has been dropped or damaged. To reduce the risk
of electric shock, do not disassemble or attempt to repair the
appliance. All repairs must be performed by a qualied service
professional. Incorrect reassembly or repair could cause a risk
of re, electric shock, or injury when the appliance isused.
- If Heating Indicator Light does not illuminate when
Temperature Control Dial is turned to a selected heat setting,

4 |ENGLISH
unit is not operating normally. Immediately unplug and have
unit serviced by qualied service personnel.
- When lling Water Tank, only water should be used in unit
- other cleaning agents could damage unit or cause injury.
Distilled or de-mineralized water is highly recommended, in
order to minimize potential build-up of mineral deposits. Do
not overll unit.
- Do not attempt to use steam function without properly lling
Water Tank.
- To reduce risk of contact with hot water emitting from steam
vents, check appliance before each use by positioning it away
from body and pressing Steam Burst Button. Do not operate
unit if steam vents are blocked.
- Do not allow power cord to touch hot surfaces (such as
Ironing Plate) during use.
- Wrap cord with supplied "hook and loop" fastener when
storing.
- Always allow unit to cool completely (at least 30 minutes)
before storing. Prop unit upright when cooling, to avoid heat
damage to surfaces.
- The iron must be used and rested on a stable surface.
- A loose t between wall outlet (receptacle) and plug may
cause overheating and distortion of the plug. Discontinue use
of the product in this outlet. Contact a qualied electrician to
replace loose or worn outlets.
- To reduce the likelihood of circuit overload, do not operate
another high wattage appliance on the same circuit.
- If an extension cord is absolutely necessary, a 15 amp rated
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that
the cord cannot be pulled or tripped over.

ENGLISH |5
- This appliance has a polarized plug (one blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to t in a polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do not attempt to
defeat this safety feature.
- The iron is not intended for regular use (for travel irons).
- Use appliance only for its intended use.
WARNING: Changes or modications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
Please refer to our website for the most current version of our
owner’s guide.
READ AND SAVE THESE INSTRUCTIONS

6 |ENGLISH
UNIT FEATURES
& ACCESSORIES
Ironing Plate
Main Body
Heating Indicator Light
Water Tank Cap
Water Tank View Window
Water Tank
Continuous Steam Switch
Temperature Control Dial
Steam Burst Button
Handle
Handle Collapse Lever
Fill Cup
1
2
3
4
5
6
7
8
9
10
11
12
Product Information
2
4
5
6
78
910
11
1
3
12

ENGLISH |7
1. The Ironing Plate is the heated, non-stick surface that is used to press
fabrics, remove wrinkles and create creases.
2. The Main Body contains the unit’s internal heating components
3. The Heating Indicator Light illuminates when the Ironing Plate is
heating. It will turn off when the set temperature is reached.
4. The Water Tank Cap covers the Water Tank ll hole. The Cap will
“click” when completely shut.
5. The Water Tank View Window lets you monitor the level of water in
the Water Tank. The unit must be sitting upright to correctly read the
water level.
6. The Water Tank is designed to hold a maximum of 1.00oz (29.5mL) of
water.
7. The Continuous Steam Switch controls the unit’s continuous steam
feature. When Switch is in the position, continuous steam is
inactivated. When Switch is in the position, continuous steam is
activated
8. The Temperature Control Dial is turned to select the various Ironing
Plate heat settings based on your fabric and to turn the unit OFF.
9. Press and release the Steam Burst Button to release a powerful, quick
burst of steam
10. The Handle is designed for easy control and navigation of the unit
11. The Handle Collapse Lever is a nice space-saving feature when
storing your unit.
12. The Fill Cup is designed to help you easily and consistently ll the
Water Tank. Note: lling water to MAX line on the Fill Cup will
overow the Water Tank.

8 |ENGLISH
FILLING WATER TANK (FOR STEAM IRONING)
1. Turn off and unplug unit.
2. Place unit on a at surface and stand the iron upright.
3. Fill the Fill Cup with up to 1.00 oz (29.5mL) of water. Do not ll the Fill
Cup to the MAX ll line. It will overow the Water Tank.
NOTE: In order to extend the life of your unit and keep it
functioning at it’s maximum potential, it is highly recommended
that distilled or de-mineralized water be used in Water Tank.
4. Open the Water Tank Cap. Pour water from Fill Cup into the Water
Tank. Close Water Tank Cap. The Cap will “click” when completely
shut.
While steam-ironing, the Water Tank Windows let you monitor the water
level in the Water Tank. When the water level becomes low:
1. Turn off and unplug unit. Allow to cool for at least 5 minutes.
2. Follow STEPS 2-4 above.
3. Plug power cord back in and resume ironing as usual.
Using the Mini Steam Iron

ENGLISH |9
OPERATING UNIT
CAUTION: Do not operate when handle is in collapsed position.
STEAM IRONING
1. Follow Filling Water Tank procedure on pg 6.
2. Plug power cord into a convenient electrical outlet.
3. Turn Temperature Control Dial to your desired ironing plate heat
setting. The desired setting should align with the Heating Indicator
Light.
4. When Heating Indicator Light turns off, the sole plate has reached it’s
set temperature.
5. To produce Continuous Steam, set the Temperature Control Dial
between Cotton and MAX. Once set temperature is reached, move
the Continuous Steam Switch to position. Continuous steam will
begin to emit from ironing plate. To stop continuous steam, move
Continuous Steam Switch to position.
NOTE: Water may leak from ironing plate if too low a setting
has been selected. Continuous Steam is only available when the
Temperature Control Dial is set to the heat settings between
Cotton and MAX.
To produce a quick, powerful burst of steam, set the Temperature
Control Dial to your desired setting. Once the Heating Indicator Light
has turned off, direct the ironing plate at your fabric and press the
Steam Burst button. Steam Burst is available on all ironing plate heat
settings.

10 |ENGLISH
DRY IRONING
IMPORTANT: Make sure Continuous Steam Switch is in the
position to avoid water leakage.
1. Plug power cord into a convenient electrical outlet.
2. Turn Temperature Control Dial to desired ironing plate setting. The
desired setting should align with the Heating Indicator Light.
NOTE: It is recommended to start with lower temperatures rst,
as high settings designed for heavy materials can damage delicate
fabrics.
3. When Heating Indicator Light turns off, Ironing Plate is heated and
ready for use.
NOTE: During use, Heating Indicator Light will cycle on and off as
unit works to maintain a constant temperature. You may continue to
iron while Light cycles.
Once all ironing tasks are nished, immediately turn Temperature
Control Dial to OFF position. Be sure to set Continuous Steam Switch
to position to avoid water leakage. Place unit upright to cool the
ironing plate.