STEELGREEN SG52 User manual

INSTALLATION MANUAL
7 GAL. INDEPENDENT SPRAYER SG52\46

2
7 GAL. INDEPENDENT SPRAYER EXPLODED VIEW \ RIGHT SIDE

3
7 GAL. INDEPENDENT SPRAYER EXPLODED VIEW \ LEFT SIDE

4
7 GAL. INDEPENDENT SPRAYER ASSEMBLY INSTRUCTIONS
STEP ONE: Disconnect the baery, ground rst
and then power wire.
STEP TWO: Remove exisng storage container
and support bracket from the frame.
NOTE: Instrucons are the same for the right
and le side.
GROUND POWER

5
7 GAL. INDEPENDENT SPRAYER ASSEMBLY INSTRUCTIONS
STEP THREE: Install the independent sprayer
to the frame as shown.
NOTE: Instrucons are the same for the right
and le side.
Hex nuts HFNCS-516S qty. (4)
STEP FOUR: Connect the “pump” wiring har-
ness to the pump plug and route the harness
between the tank and upright.
Carriage bolts CB-51634 qty. (4)