Steren K-675 User manual

ENGLISH
ENGLISH-02
IMPORTANT
Before using your new Robot kit with remote control, please read
the following recommendations.
This device is recommended for kids older than 12 years old.
We recommend adult supervision for the assembly of the robot.
Do not expose your robot to extreme temperatures.
Always use a soft and dry cloth in order to clean your robot.
FEATURES
This robot kit is easy to build and offers students, teachers, and
electronic and mechanical hobbyists large amounts of fun and
information.
The clamp mechanism can lift light objects.
The wireless remote control allows you to control the robot´s
movements through the two motors in its extremities, one motor in
its head, and one motor in its clamp.
It can also interact with up to four robots at the same time as the
remote control has four different channels.
The robot´s pieces are plastic and include integrated circuits and
cables that do not require soldering.
•
•
•
•
•
•
•
•
•
Before usin
g
y
our new Robot kit with remote control, please read
the followin
g
recommendations
.

ENGLISH
ENGLISH-03
ASSEMBLAGE OF REMOTE CONTROL
REQUIRED TOOLS
Long nose pliers Diagonal cutter Screwdriver 4 x AA Batteries
S
CONTENT
P1 Battery terminal P2 Battery terminal
Qty 2 Qty 2
P3 Battery terminal P4 Tapping screw
Qty 2 Qty 4
P5 Tapping screw P6 PC Board
Qty 4 Qty 1
2.3
1:1
2.6

ENGLISH
ENGLISH-04
PLASTIC PARTS
ASSEMBLER
1.- Put the pieces P1, P2 and P3 in the piece C
Bend down the tag
ABC
1

ENGLISH
ENGLISH-05
2.- Place 4 AA batteries putting emphasis on the polarity.
3.- Break the pieces displayed in the figure below.
4XAA
2
3

4.-Put your PC Board (P6) in the previous piece and assembled screw
PC BOARD
ENGLISH
ENGLISH-06
P6
4

5.- Insert the switch as shown in the figure, put attention on the polarity
of the wires.
ENGLISH
ENGLISH-07
RedBlack
5
Red Black

6.- Place the second switch attention to putting the polarity of the wires.
ENGLISH
ENGLISH-08
White Wire
Black Wire
Black
Black
6
White
White

7.- Put the pieces B4, B5, B6 and B7 in the previous assembly.
8.- Place the piece B1 in the piece A2.
ENGLISH
ENGLISH-09
7
8

9.- Place the piece A2 in assemblage of step 7 and screw.
10.- Finally put the pieces A1, B2 and B3 in the previous assembly.
Finished remote control
ENGLISH
ENGLISH-10
9
10

ASSEMBLAGE OF ROBOT
REQUIRED TOOLS
Long nose pliers Diagonal cutter Screwdriver 4 x AA Batteries
CONTENT
Yellow Orange
P1 Motor P2 Motor
Green Qty 1 Blue Qty 1
White P3 Motor Gray P4 Motor
Qty 1 Qty 1
Purple Brown
P5 Pinion Gear P6 Gear with shaft
Qty 2 (Green)
Qty 2
P7 Gear with shaft P8 Gear 44/18T
(Orange) (Blue)
Qty 4 Qty 4
ENGLISH
ENGLISH-11

ENGLISH
ENGLISH-12
P9 Gear 48/18T P10 Gear 32/10T
(White) (Gray)
Qty 2 Qty 4
P11 helical gear 32/10T P12 Clutch gear 32T
(Brown) (Blue)
Qty 2 Qty 2
P13 Output Gear 10T P14 Round shaft
(Black) Qty 3
Qty 2
P15 Round shaft P16 Eyelet
Qty 1 Qty 6
P17 Tapping screw P18 Tapping screw
Qty 32 Qty 3
20
1:1
16
1:1
3
1:1 2.6
1:1

ENGLISH
ENGLISH-13
P19 Tapping screw P20 Tapping screw
Qty 5 Qty 2
P21 Screw P22 Srew
Qty 5 Qty 3
P23 Battery P24 Battery terminal
Terminal. With Connector
Qty 2 Qty 1
P25 Battery P26 LED with
terminal with wire wire
Qty 1 Qty 1
P27 Sponge
Qty 2
2.3
1:1
2
1:1
2
1:1
21:1

ENGLISH
ENGLISH-14
P28 PC Board P29 Sticker
Qty 1 Qty 1
PLATIC PARTS
ignore this part

Please ignore this part
ENGLISH
ENGLISH-15
M3
4
5
2
1
L1
2
3
NS
｡ｰ

ASSEMBLAGE
1.- Place the engine P1 in gear P5
2.- Place the engine P2 in gear P5
ENGLISH
ENGLISH-16
P1
P5
1
104
104
P2
P5
2
104
104

3.- Place the motor P2 in the M3 piece, then insert the ensemble piece
in the M1 and screw. Put Motor P1 now in the opposite direction to the
motor P2 piece in the M3.
ENGLISH
ENGLISH-17
104
104
2cm
3
104
104
104
104
P2
P2
P17x2
P1
180
M3
M1

4.- Place the piece on the M4 and M3 piece screw.
5.- Put the piece in the piece P16 B 82 (Make two equal ensembles)
ENGLISH
ENGLISH-18
4
M4 P20x2
104
104 104
5
P16
B
P16
B
X2

6.- Place two pieces in the previous assembly step 4
7.- Screw the pieces and placed accommodate the cables.
ENGLISH
ENGLISH-19
6
104
B
B
P17x4
7

8.- Gear parts P6, P8 and P9 as shown in the diagram below.
ENGLISH
ENGLISH-20
P9
(White)
P9
(White)
P9
(White)
P9(White)
P8
(Blue)
P8
(Blue)
P8
(Blue)
P8
(Blue)
P8
(Blue)
P8
(Blue)
P8(Blue)
P8
(Blue)
P6
(Green)
P6
(Green)
P6(Green)
P6(Green)
8