Steren K-680 User manual

ENGLISH
ENGLISH-02
IMPORTANT
Before using your new Wired control robot arm kit, please read the
following recommendations.
This device is recommended for kids older than 12 years old.
Keep away from children under 3 years, the kit contains small parts.
We recommend adult supervision for the assembly of the robot.
Do not expose your robot to extreme temperatures.
Always use a soft and dry cloth in order to clean your robot.
FEATURES
This mechanical arm is a kit that teaches robotic and mechanic
basics in a fun.
You can send a signal to open or close the clamp, hold objects (up
to 3.5 oz.), move the arm up, down left, or right through the
integrated remote control.
The pieces are are very safe and easy to put together and they do
not require soldering.
•
•
•
•
•
•
•
•
Before usin
g
y
our new Wired control robot arm kit, please read the
f
ollowin
g
recommendations
.

ENGLISH
ENGLISH-03
ASSEMBLAGE OF REMOTE CONTROL
REQUIRED TOOLS
Long nose pliers Diagonal cutter Screwdriver
S
CONTENT
P1 Metal plate
Qty 5
P2 Tapping screw P4 PC Board
Qty 9 Qty 1

ENGLISH
ENGLISH-04
PLASTIC PARTS
A
A
1 2 3 4 5
B C

ENGLISH
ENGLISH-05
ASSEMBLY
1.- Insert the piece P3 in the piece C, make a small fold the ribbon
cable.

ENGLISH
ENGLISH-06
2.- Place the metal plates and screw.
3.- Insert pieces A1, A2, A3 and A4 and A5 in part B.

ENGLISH
ENGLISH-07
4.- Assemble and screw parts B and C.
5.- Finished Remote control.

ENGLISH
ENGLISH-08
ASSEMBLAGE OF ROBOT
REQUIRED TOOLS
Long nose pliers Diagonal cutter Screwdriver “D” Battery (4)
CONTENT
Orange Blue
P1 Motor P2 Motor
Black Qty 2 Black Qty 2
Yellow P3 Motor P4 Gear 32/10T
Qty 1 (Gray)
Black Qty 10
P5 Gear 32/10T P6 Gear 32T
(Brown) (Blue)
Qty 5 Qty 5
P7 Output gear 10T P8 Output gear 10T
(Black) (White)
Qty 4 Qty 1

ENGLISH
ENGLISH-09
P9 Round shaft P10 Round shaft
Qty 9 Qty 1
P11 Tapping screw P12 Tapping screw
Qty 5 Qty 11
P13 Tapping screw P14 Tapping screw
Qty 19 Qty 12
P15 Machine screw P16 Self tapping screw
Qty 10 Qty 4
P17 Self tapping screw P18 Nut
Qty 3 Qty 16
20
1:1
16
1:1
3
1:1
2.6
1:1

ENGLISH
ENGLISH-10
P19 Washer P20 Battery terminal
Qty 3 with wire.
Qty 1
P21 Battery terminal P22 LED with
with connector. wire
Qty 1 Qty 1
P23 Sponge P24 Wire Clip
Qty 2 Qty 3
P25 PC Board
Qty 1

ENGLISH
ENGLISH-11
PLASTIC PARTS
ignore

ENGLISH
ENGLISH-12

ENGLISH
ENGLISH-13
ASSEMBLY
From 1 to 4 step must be done twice, to get the pieces M4 and M5
1.- Place 4 nuts P18 in the piece A2.
From 1 to 4 step must be done twice, to get the pieces M4 and M5
C
Antes de utilizar su nuevo Kit C
From 1 to 4 step must be done tFrom 1 to 4 step must be done t

ENGLISH
ENGLISH-14
2.- Pull the gear system, placing the gear P4, P5, P6 and P7.

ENGLISH
ENGLISH-15
3.- Place the motor P1.
Black
Orange

ENGLISH
ENGLISH-16
4.- Finally Put the piece A1 in the previous assembly and screw. So get
the pieces M4 and M5.
Orange
Black

ENGLISH
ENGLISH-17
5.- Gearbox assembly for M3. Place 4 nuts P18 in the piece A2.

ENGLISH
ENGLISH-18
6.- Pull the gear system, placing the gear P4, P5, P6 and P7.

ENGLISH
ENGLISH-19
7.- Place the motor P2.
Black
Blue

ENGLISH
ENGLISH-20
8.- Finally A1 place the piece in the previous assembly and screw.
Blue
Black