Strong SRT 4664XII User manual

1
1. Introduction 2
1.1 Overview
1.2 Main Features
2. Safety/Precautions 3
2.1 Safety
2.2 Precautions
3. Points to Check before Use 5
3.1 Accessories
4. Controls/Functions 6
4.1 Front Panel
4.2 Rear Panel
4.3 Remote Controller
5. How to Connect 10
6. Operation 11
6.1 Getting Started
6.2 System Setting
6.3 Channels
6.4 Electronic Program Guide
6.5 Games
6.6 USB Menu
6.7 System Information
6.8 Conditional Access System
6.9 PVR
7. Troubleshooting 46
8. Specifications 47
Contents

2 3
This satellite receiver is designed for the reception of free-to-air. Depending on your
location, enjoy the rich choice of up to 10,000 different channels broadcasting a large range
of programs: culture, sports, cinema, news, events, etc. This receiver is assembled with
highly qualified electronic parts.
Introduction
1.1 Overview
ȞEmbedded CONAX CAS7
ȞMPEG-II digital & fully DVB compliant
ȞOn-Screen Display (OSD) with a 256-colors color resolution
ȞDiSEqC control version 1.0, 1.1, 1.2 and USALS compatible
Ȟ16 renameable favorite channel groups
ȞPowerful channel control by Favorites, Lock, Skip, Move and Delete
ȞChannel sorting by Alphabet, Transponder and Conditional Access System (CAS)
ȞMultilingual language OSD & menu : English, Italian, Turkish, Arabic, Parsi, German, French,
Russian, Spanish, Portuguese
ȞExtended Electronic Program Guide (EPG) and program reservation through EPG
ȞTeletext by OSD/VBI (Vertical Blanking Interval)
ȞLast channel memory function
ȞTotal of 10,000 programmable channels
ȞAdvanced ‘Channel List’ menu
ȞMulti-satellite search
ȞGames with stereo sound
ȞSoftware & channels database upgrades via RS-232C: PC to STB/STB to STB
ȞParental Lock/ Installation Lock / Receiver Lock / Channel Lock / Lock Channel Confirm.
ȞDigital audio output [S/PDIF]
ȞMulti-picture display
ȞZoom capabilities
ȞAdvanced Blind Search Function
ȞColor Adjustment Function
ȞUSB Interface
ȞComponent output(Y/Pb/Pr)
ȞUSB2.0 PVR Ready via external HDD with Timeshift, Record & Playback functions
ȞHigh speed software upgrade via USB 2.0
ȞMP3 player and JPEG viewer
1.2 Main Features

Be sure to read this user's manual
before starting the operation of the unit.

Do not touch the power cord with wet
hands as it may cause electric shock.

Never open the cover. It is very
dangerous to touch the inside of the
unit due to possible electric shock.

Place the unit in a well ventilated and
no-heat environment.

When you do not use this unit for a
long time, make sure that the power
cord is pulled out from the outlet. Also
do not use a damaged power cord as it
may cause fire or electric shock.

A professional installation is required.
If reception is interrupted, contact your
local service centre.
Safety/Precautions
2.1 Safety
DiSEqC is a trademark of EUTELSAT

4 5
When installing the unit
2.2 Precautions

Install the unit horizontally. An uneven
installation may cause the unit to be
damaged.

Do not put heavy items such as a TV
set on the unit. That may damage the
unit.
Do not leave the unit where the water
drops or splashes.
Do not put water holding items such as
vases on the unit.

Do not install the unit:
ҮWhere it is subject to vibrations
ҮWhere it is exposed to direct sunlight
ҮWhere there is humidity
ҮWhere the temperature is too high or too low.
ҮWhere there is no ventilation

Moving the unit to a hot area from a
cold one will cause condensation.
Do not operate the unit for one or two
hours or until it has dried completely.
User's manual : 1
User's manual
Remote control : 1
Batteries (AAA type) : 2
The accessories below are included with this receiver:
Points to Check before Use
3.1 Accessories
ȞThis unit supports DiSEqC 1.2 and can work with a compatible antenna positioner.
Ask your dealer for information.
3.2 The Satellite dish
RCA Cable : 1
ȞThe mains plug is used as the disconnect device.
The disconnect device shall remain readily operable.
Adapter : 1 Component Cable : 1
ȞIf any of the above-listed accessories is missing, contact your sales
representative.
Your dish should be properly installed and azimuth and elevation must be precisely set up.

6 7
Controls/Functions
4.1 Front Panel
4.2 Rear Panel
Standby/Power on Indications Lamp : Flashes red light in ‘Standby’ mode and
shows no light in ‘Power ON’ mode.
Indication Light : Flashes when a key on the Remote Control Unit (RCU) is
pressed.
Power : Switches the receiver between ‘Standby’ and ‘Power ON’ modes.
- CH. ƊƊ/ƌƌ: To switch channels or change the cursor position on the
application screen.
USB : To connect USB devices such as Memory stick or external Hard Disk Drive.
Smart Card Reader(Option) : Insert smart card for encrypted channel access.
7
6
54
3
2
1
3 6 7
51 2 4
71181 3 5
910 122 4 6
No. Name Connector Function
1LNB INPUT IEC 169-24 FEMALE IF input from LNB to digital tuner
2 LOOP OUT IEC 169-24 FEMALE IF loop-through output from digital tuner
3 AUDIO L RCA cinch Left audio output
4 AUDIO R RCA cinch Right audio output
5VIDEO RCA cinch Composite video output
6 S/PDIF RCA cinch Digital audio output
7Y RCA cinch Component video output (Y)
8Pb RCA cinch Component video output (Pb)
9Pr RCA cinch Component video output (Pr)
10 RS-232C DB-9 Low speed serial port
11 RF OUT UHF 21-69 IEC 169-2 MALE Output to TV
12 TV ANT IN IEC 169-2 FEMALE Input from terrestrial antenna

8 9
4.3 Remote controller 4.3 Remote controller
POWER :To turn the receiver On/Off.
MUTE : To turn the sound On/Off.
Numeric Keys (0-9) : To enter numerical
settings (such as channel numbers)
directly.
INFO : To show information about the
current program. Press twice to show
detail.
PAUSE : To pause the video. Press
again to resume the video.
EPG : To show the TV/Radio program
guide.
GROUP :To change the channel
groups(Satellites or favorite groups).
MENU : To enter or exit the main menu.
EXIT :To exit from the present menu and
move to the previous menu.
-Double arrow UP/DOWN : To move
to the next or previous page when
many pages are available.
-Up & Down : To switch channels in
non-menu mode and move the
cursor up/down in menu mode.
-Left & Right : To change the volume
level in non-menu mode and modify
a setting in menu mode.
OK : To show the Channel List in non-
menu mode and select an item or confirm
in menu mode.
TV/RADIO :To switch between TV and
Radio.
TV/SAT :To switch the TV output source
between the satellite input and the
UHF/VHF antenna input.
18
17
16
1514
1312
1110
9
8
7
6
5
4
3
2
1
12
4
9
15
5
10
11
3
6
8
RECALL(RED):To move to the previous
channel. Used for special functions in
menu mode.
AUDIO(GREEN): To show the Multi-
language audio track, the stereo-mono
mode. Used for special functions in menu
mode.
TEXT(YELLOW): To show the teletext
contents if teletext is transmitted. Used
for special functions in menu mode.
BLUE : To display multiple pictures.
COLOR : To control the brightness,
contrast and color of a picture.
ZOOM : To zoom in the screen picture.
Press the ZOOM button and select a
screen section, then press the OK button.
(You can zoom in by 3 times)
RWD : Playback in rewind mode.
ADVANCE : Go to live channel.
FWD : Playback in forward mode.
REC : Start recording.
PLAY : Play Content.
STOP : Stop Playback.
FILELIST : To display the filelist.
BOOKMARK : To mark a specific place
in a file for later retrieval.
SLEEP : To set the STB off after minutes.
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
17
12
14
16
7
18
13
21
24
19
23
20
25
28
29
31
22
27
26
30
33
32

10 11
Operation
6.1 Getting Started
Turn on your TV and receiver.
The pop-up menu for language selection will appear.<Figure 6.1.1>
Select one language and press to proceed.
After your receiver is powered on, proceed with installation as follows :
1) Menu Language Setting
<Figure 6.1.1>
How to Connect
Connect the TV antenna to TV ANT IN
Connect the RF-IN of the TV to RF-OUT
When available, you may instead connect the video and audio of the TV to
video and audio: Connect the red and white connectors to Audio R and
Audio L, and the yellow connector to video
When available, you may instead connect the Component Video of your TV to
Component Video for best quality: connect the Y, Pb and Pr of your TV to
Y,Pb and Pr respectively
Connect your satellite dish
5
4
3
2
1

1312
6.1 Getting Started 6.1 Getting Started
Select the item that you want to edit, and set its parameters as desired. <Dish Setting>
- LNB Power : Select among ON/OFF/13V/18V.
- LNB Type : Select among Single/Universal/OCS.
- LNB Freq : Set the frequency of the LNB oscillator.
- 22KHz : When not AUTO, set the signal path from LNB or switch by selecting a control
signal among 0/22KHz.
- DiSEqC switch : Select DiSEqC protocol among OFF/1.0/1.1 as appropriate for your
configuration.
- Committed/Uncommitted : Select the DiSEqC port.
Select the item that you want to edit and set its parameters as desired. <Motorized Setting>
- Frequency : If the default TP frequency is not appropriate, you can select another TP
frequency at which to check for signal.
- DiSEqC Motor : Select DiSEqC protocol among OFF/1.2/USALS as appropriate for your
Motor.
(When the DiSEqC Motor parameter is set as 1.2)
- Hemisphere : Select between the Northern/Southern.
- Move : You can move the dish to the West/East.
- Limit : If you want to set limits, press .
- Disable Limit : You can disable the East and West limits.
- Goto Center : Move the dish to the initial 0 position.
- Set East / West Limit : Move the dish East or West using / .
Press to set East or West limit.
(When the DiSEqC Motor parameter is set as USALS)
- Sat Degree : Satellite location.
- Antenna Position : Press .
- Goto Reference : Move the dish to the reference 0 position.
- Antenna Longitude : Your longitude at present.
- Antenna Latitude : Your latitude at present.
ҫ Note : You need to know what LNB you are using to correctly set the L.O. (local
oscillator) frequency.
ҫ Note : You need to understand how your receiver is connected to properly set the
22KHz and DiSEqC.
When you are done, press the EXIT button.
VOL
VOL
<Figure 6.1.2> <Figure 6.1.3>
Press the MENU button to display the main menu.
Use / and / to move in the menu.
Press on ‘Dish Setting’. The following window will appear. <Figure 6.1.2>
If you have a motorized dish, press on ‘Motorized Setting’. <Figure 6.1.3>
ҫ Note : Enter a 4-Digit password if need arise. The default password is ‘0000’.
VOL
VOL
CH
CH
2) Antenna Setup

1514
ȞManual Scan <Figure 6.1.7>
Select a transponder.
To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
To change a transponder's polarization, use the or keys.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
To search a transponder, set its different parameters and press .
VOL
VOL
6.1 Getting Started 6.1 Getting Started
ȞPackage Identifier (PID) Scan <Figure 6.1.8>
Select a transponder.
To change a transponder’s information (Frequency, Symbol Rate), use the NUMERIC
buttons.
To change a transponder's polarization, use the or keys.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the Frequency
parameter.
To search a transponder, set its different parameters and press / . You can search
a specific channel of the transponder by setting its PID data (Video, Audio and PCR).
ҫ Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
CH
CH
VOL
VOL
Through this function, the receiver searches for all the available channels and saves them in
memory. Chose Auto Scan to search using transponders (frequencies) in memory, or chose
Blind Scan to look for new satellite/transponders.
ȞAuto Scan <Figure 6.1.4>
Press on the names of the satellites that you want to scan under ‘Satellite List’.
You can select more than one satellite.
Press and set the ‘Search Type’ and ‘Network Search’ parameters.
- Search Type : Decide for which channels to search (All channels/ Free channels only/
TV channels only).
- Network Search : Set ON to find more transponders (frequencies) through a Network
Information Table (NIT) scan. That is, when the broadcaster is
sending a NIT through a given transponder, the receiver will also scan
for transponders listed in the NIT and not otherwise recognized.
(this can happen when a transponder is new)
Press under ‘SCAN’ to scan the selected satellites. <Figure 6.1.5>
VOL
3) Satellite Scan
<Figure 6.1.4> <Figure 6.1.5>
ȞBlind Scan <Figure 6.1.6>
Select the satellites you want to search by pressing the button on the remote.
Press  / to set the “Polarization” and “Scan Mode” options.
- Polarization : Select Vertical / Horizontal / All.
- Scan Mode : Select Fast / Detail.
- SCAN : Begin channel search of the selected satellites.
Press the RED button on the remote to begin a blind scan of all ‘selected’ satellites.
CH
CH
VOL
<Figure 6.1.6> <Figure 6.1.7>

17
You can use / to navigate between channels until you find the channel you want.
ȞIf you know the channel number, you can enter it with the NUMERIC buttons and wait 2
seconds until the channel is changed.
ȞIf you know the channel name or transponder or CAS, you can press to display the
channel list <Figure 6.1.10>
CH
CH
4) Channel Selection
<Figure 6.1.10>
In the right side of screen, detailed information about the selected channel will be
displayed. (Satellite Name, Frequency(Polar) and Channel Name)
You can use the following buttons to navigate between channels:
- / :Moves one channel up/ down.
-/ :Moves one page up / one page down.
- RED : Shows all channels in the current group.
- GREEN : Shows all channels sorted alphabetically.
- YELLOW : Shows all channels sorted by Transponder.
- BLUE : Shows all channels sorted by CAS system.
Press when the selection bar is positioned on the desired channel.
VOL
VOL
CH
CH
6.1 Getting Started
16
6.1 Getting Started
ȞOTA Menu <Figure 6.1.9>
You can download the latest software via satellite using the OTA (Over the Air) menu.
ҫ Note : OTA information is subject to change by the manufacturer with or without
notice.
Press or to select a Scan mode:
- Default : Default satellite and transponder information is used for OTA download.
- User : Use this mode if OTA download fails in default mode and/or you wish to add or
edit satellite and transponder information. Please contact your local dealer or
provider for more information.
Press the RED button to start OTA download.
ҫ Note : Be careful! Please do not power off during OTA download.
Once OTA download is complete, your satellite receiver will be reboot
automatically.
VOL
VOL
<Figure 6.1.9>
<Figure 6.1.8>

1918
ȞPAUSE
You can press this key to pause the video. Press it again to resume the video. When video is
paused, you can zoom in sections of it.
Select a section using / / / .
Press to zoom in. Press again to zoom out.
ȞGROUP
When watching TV or listening to Radio, you can press this button to view the list of satellites
and/or favorite channel groups.
Only registered satellites and favorite groups are displayed.
ȞMulti Picture Display <Figure 6.1.11>
You can press the BLUE button to display multiple pictures; you can choose the number of
pictures such as 1X2, 2X2, 2X3 or 3X3.
ȞSLEEP <Figure 6.1.12>
You can set the your receiver to turn off after a few minutes. Press SLEEP button to set the
sleep timer.
- To cancel the sleep timer, please press until you set time as “0 min”.
(0-Disable, 10, 20, 30, 60, 90, 120 Minutes)
VOL
VOL
CH
CH
6.1 Getting Started
<Figure 6.1.11> <Figure 6.1.12>
5) Other Functions of the Remote Control
ȞVolume Control
While watching a program, press or to control the volume.
You can press the MUTE button to remove the sound of the program: the mute icon will be
displayed. Press the MUTE button again to turn the sound back on.
ȞChannel Information
You can press the INFO button to display the information banner for a few seconds.
If you then press the INFO button again, a detailed banner will be displayed.
ȞTV/ SAT switching
You can press TV/SAT to select the source of the signal to receive:
- TV Mode : Signal from TV ANT INPUT will be out. (Front will display ‘TV’)
- SAT Mode : Signal from Satellite will be out. (Front will display the channel number)
ȞTV/ RADIO switching
You can press this key to change from a TV channel to a Radio channel or vice versa.
ȞRECALL(RED)
Press to return to the previous channel.
ȞSubtitle / Audio (GREEN)
Press to adjust the subtitle and/or audio status of the current channel:
- Audio Mode : Select between, Stereo ƍMono-Left ƍMono-Right
- Audio Track : Select between tracks available in this program
ҫ Note : These subtitle and audio parameters are workable only when the desired
channel supports these functions.
ȞTeletext (YELLOW)
The Teletext service is a text data service sometimes available from the Service Provider.
VOL
VOL
6.1 Getting Started

2120
This submenu allows you to specify the audio/video output. <Figure 6.2.2>
- Audio Language : Set the default audio language when selecting a channel.
- Subtitle Language : Set the default subtitle language.
- Video Format : Select the video output format. (AUTO/PAL/NTSC)
- Screen Format : Select the TV aspect ratio. (16:9 / 4:3)
- Display Format : Select the video display aspect ratio. (Letter-Box / Pan Scan / Full Screen /
Pillar-Box)
- RF Type : If the Video Format is set to PAL, select among supported PAL standards. (PAL
B/G, PAL I, PAL D/K).
- RF Channel : Set the RF channel to which to display the audio and video signals on your TV
set (21 to 69) ; if you select 40, they will be displayed at channel 40 on your TV
set.
- SPDIF : Set this ON to enable digital audio output.
2) A/V Output Settings
6.2 System Setting
This submenu allows you to set the menu language, OSD transparency and Information and
Volume timeouts. <Figure 6.2.3>
- Menu Language : Select the desired language for the menu.
- Transparency : Set the OSD transparency of the menu. (1% ~100%)
- Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or 10
seconds)
- Volume Timeout : Select the display duration of the volume box. (1, 2, 3, 5 or 10 seconds)
3) OSD Settings
<Figure 6.2.2>
6.2 System Setting
This submenu allows you to set your local time, wake up time, wake up channel and sleep time.
<Figure 6.2.1>
- GMT Usage : Set this ON for the local time to be determined by adjusting the time difference
with the GMT (Greenwich Meantime) according to your location.
- Current Date : If GMT Usage is OFF, you can modify the date by pressing .
- Current Time : If GMT Usage is OFF, you can modify the time using the NUMERIC buttons.
- Local Offset : If GMT Usage is ON, Local time is GMT time + Local Offset.
- Wake Up Mode : Select the wake up frequency. (Off/Once/Daily)
- Wake Up Time : Set the wake up time using the NUMERIC buttons.
- Wake Up Channel : Press to set the wake up channel.
- Sleep Mode : Select the Sleep frequency. (Off/Once/Daily)
- Sleep Time : Set the sleep time using the NUMERIC buttons.
1) Time Settings
<Figure 6.2.1>

2322
<Figure 6.2.4>
This submenu allows you to restore the factory set values (useful when encountering problems
after changing settings). <Figure 6.2.5>
- Delete Radio Channels : Erase all radio channels in the database.
- Delete Scramble Channels : Erase all scramble channels in the database.
- Delete All Channels : Erase all channels.
- Factory Set : Erase all channels and restore the factory default settings.
5) Database Reset
<Figure 6.2.5>
6.2 System Setting
<Figure 6.2.3>
This submenu allows you to set password options and to lock or unlock access to menus (Note:
PIN code and password are the same). <Figure 6.2.4>
- Receiver Lock : Set ON to require entering a PIN code at powering on.
- Install Lock : Set ON to require entering a PIN code to access the installation menu.
- Channel Lock : Set ON to require entering a PIN code to access the channels menu.
- Lock Channel Confirm : Set ON to require entering a PIN code to access a locked channel.
- Age Limit : Set to prevent children or unauthorized people from watching programs. Select
among (Block All / Block G & Above / Block PG & Above / Block M & Above /
Block MA & Above / Block AV & Above / Block R & Above). When program
information (age limit) is available from broadcaster and this age limit exceeds
the selection, a PIN code is required to access the channel/program.
- Current Password : To change your password, first enter your current password.
- New Password : Enter the new password that you want to set.
- Verify Password : Enter the new password again for confirmation.
ҫ Note : The default password is ‘0000’.
4) Security Settings
6.2 System Setting

2524
6.3 Channels
This submenu allows you to set up favorite groups of channels. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. The receiver supports 16
favorite groups.
Press on ‘Set Favorites’. The list of groups will be displayed. <Figure 6.3.1>
Press / and to choose a group. The following menu will be displayed.
<Figure 6.3.2>
If you want to change the name of a favorite group, press the RED button.
Press to add (or remove if previously added) the selected channel to/from the favorite
channel group.
Press the EXIT button to return to the previous menu.
CH
CH
1) Set Favorites
<Figure 6.3.1> <Figure 6.3.2>
This submenu allows you to rename channels and input user PID. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list
group by pressing the GROUP button.
Press on ‘Edit Channels’. The following menu will be displayed. <Figure 6.3.3>
Press on the channel that you want to edit.
Press on ‘Edit Name’ to rename the channel; the keypad will be displayed.
Similarly, you can edit the PID data using the NUMERIC keys.
ҫ Note : The VIDEO PID, AUDIO PID and PCR PID are very important for optimal
satellite signal reception. We recommend you get professional advice where
available.
2) Edit Channels
This submenu allows you to use a calculator on the screen. <Figure 6.2.6>
-You can switch between Hex (Hexadecimal) and Dec (Decimal) basis for arithmetic with the
RED button of the remote control unit.
-Use the Numerical and the / / buttons on the remote control unit.
VOL
VOL
6) Calculator
<Figure 6.2.6>
This submenu allows you to transfer the software from a receiver to another receiver. You can
select and transfer Firmware/ Channel Data/ Games. <Figure 6.2.7>
- Firmware : Transfer the firmware of a receiver to another receiver.
- Channel Data : Transfer the channel data of a receiver to another receiver.
7) Data Transfer
<Figure 6.2.7>
6.2 System Setting

2726
This submenu allows you to lock channels to control access to them. Once a channel is locked,
you will be asked to enter a password whenever you try to watch it. You can select TV or Radio
channels in an alternative way by pressing the TV/RADIO button. You can choose a channel list
group by pressing the GROUP button.
ҫ If you set ‘Lock Channel Confirm’ (refer to <6.2>security setting) to OFF, you will not
be asked to enter a password even if the channel is locked.
Press on ‘Lock Channels’. The following menu will be displayed. <Figure 6.3.5>
Press on the channel that you want to lock/unlock; the lock icon will be
displayed/removed.
Press the EXIT button to return to the previous menu.
4) Lock Channels
<Figure 6.3.5>
6.3 Channels6.3 Channels
<Figure 6.3.3>
This submenu allows you to move channels.
You can select TV or Radio channels in an alternative way by pressing the TV/RADIO button.
You can choose a channel list group by pressing the GROUP button.
Press on ‘Move Channels’. The following menu will be displayed.<Figure 6.3.4>
Press on the channel that you want to move; a ‘move’ icon will be displayed.
Use the / / / / NUMERIC buttons to move the selected channel.
Press again to place the channel.
Press the EXIT button to return to the previous menu.
VOL
VOL
CH
CH
3) Move Channels
<Figure 6.3.4>

2928
6) Delete Channels
This submenu allows you to delete channels. You can select TV or Radio channels in an
alternative way by pressing the TV/RADIO button. You can choose a channel list group by
pressing the GROUP button.
ҫ Note : Be careful! If you delete a channel, you will not be able to access it again until
you rescan.
Press on ‘Delete Channels’. The following menu will be displayed. <Figure 6.3.7>
Press on the channel that you want to set/unset for deletion; the delete icon will be
displayed/removed.
Press the INFO button to delete all channels in the current list; you will be asked to enter your
password.
Press the EXIT button to return to the previous menu and confirm deletion.
<Figure 6.3.7>
6.3 Channels
<Figure 6.3.6>
This submenu allows you to skip channels. Once a channel is set to be skipped, it will be
whenever you navigate channels using / in non-menu mode. You can select TV or
Radio channels in an alternative way by pressing the TV/RADIO button. You can choose a
channel list group by pressing the GROUP button.
ҫ Note : You can still access a ‘skipped’ channel if you enter its number using the
NUMERIC buttons in non-menu mode.
Press on ‘Skip Channels’. The following menu will be displayed.<Figure 6.3.6>
Press on the channel that you want to skip/un-skip; the skip icon will be displayed /
removed.
Press the EXIT button to return to the previous menu.
CH
CH
5) Skip Channels
6.3 Channels

3130
<Figure 6.4.1> <Figure 6.4.2>
This sub menu allows you to set the on/off time of your receiver.
This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6.4.2>
Press / to select a timer’s parameter.
Press / to change the parameter.
- Timer No : Select the timer that you want to modify. (1- 8)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press to display a Channel list pop-up; Select a channel
- Record : To record program. (off/on, This function is available when USB device is
connected)
- Power off : To your receiver power-off
VOL
VOL
CH
CH
2) Timer
6.4 Electronic Program Guide6.4 Electronic Program Guide
This submenu allows you to access the electronic program guide when available.
Press the EPG button to display the guide menu. <Figure 6.4.1>
Press / to see the previous/next guide.
Press / / / to select another channel. <Figure 6.4.1>
Press to watch the selected channel and access its EPG data.
If you press in the right side of the screen (Event display list).
-If the current time EPG is selected, you will return to the previous menu and get signal from
the selected channel.
-If a future time (next) EPG is selected, the selected program will be reserved and the event
color will change.
You can select TV or Radio channels by pressing the TV/RADIO button
You can choose a channel list group by pressing the GROUP button.
You can access the timer menu by pressing the RED button. <Figure 6.4.2>
CH
CH
VOL
VOL
1) EPG

3332
6.5 Games
Press the EXIT button to quit the game.
<Figure 6.5.3> <Figure 6.5.4>
Press on ‘Snake’. The following menu will be displayed. <Figure 6.5.5>
You can choose a skill level using / .
Press to start the game <Figure 6.5.6>, or press the EXIT button to return to the previous
menu.
Press / / / to move.
Pass through the BLUE icon to increase your score; the length of the snake increases.
Pass through the RED icon to decrease the snake’s length.
Avoid the BLACK icons. If you hit a BLACK icon (block), the game ends.
Press the EXIT button to quit the game.
VOL
VOL
CH
CH
CH
CH
3) Snake
<Figure 6.5.5> <Figure 6.5.6>
Press on ‘Tetris’. The following menu will be displayed. <Figure 6.5.1>
You can choose a skill level using / .
Press to start the game <Figure 6.5.2>, or press the EXIT button to return to the previous
menu.
Press to rotate a block.
Press / to move a block.
Press to drop a block.
You can see the next block in the top-right small window.
Press the EXIT button to quit the game.
CH
VOL
VOL
CH
CH
1) Tetris
<Figure 6.5.1> <Figure 6.5.2>
6.5 Games
2) Sokoban
How to play Sokoban: you have to push the balls to their correct positions. The balls can only be
pushed, never pulled, so you have to be careful not to push them into a corner where you can’t
get them out from. You can only push one ball at a time.
Press on ‘Sokoban’. The following menu will be displayed. <Figure 6.5.3>
You can choose a skill level using / .
Press to start the game <Figure 6.5.4>, or press the EXIT button to return to the previous
menu.
Press / / / to move.
Press the RED button to undo the previous move. You can undo only one step.
Press the GREEN button to restart the game.
Press the YELLOW/BLUE buttons to jump to the previous/ next level. You can jump only
between completed levels.
VOL
VOL
CH
CH
CH
CH

3534
This submenu allows you to play various MP3 files, view JPG files or download a new software by
connecting your USB flash drive.
1) MP3 menu
Select the MP3 file you want to play back by using / , in the file list. <Figure 6.6.1>
Press the EXIT button to hide the file list. You can then select an option using / , 
<Figure 6.6.2>
Move to the volume control bar using / . You can then change the volume by pressing
/ .
Press on to display the MP3 file list.
Press on to display information about the selected MP3 file.
- GROUP : Shows the MP3 file list
- INFO : Shows information about the MP3 file you selected.
CH
CH
VOL
VOL
VOL
VOL
CH
CH
6.6 USB Menu 6.6 USB Menu
2) JPG menu
Press / to select a picture. <Figure 6.6.3>
Press to show the picture you want to display.
- RED : Shows/ Hides the JPG file list.
- GREEN : Selects slide show.
- YELLOW : Sets the time interval between slides.
3) Data Transfer menu
Select the software you want to download by using / in the list <Figure 6.6.4>
Press to start software downloading
- Please do not switch off your receiver before software downloading is complete.
CH
CH
CH
CH
<Figure 6.6.3>
<Figure 6.6.4>
<Figure 6.6.1> <Figure 6.6.2>

37
6.6 USB Menu
5) PVR Management
- Disk Information : Choose the hard disk drive. You can view the information of selected
drive. (file system, total size, used size, free size) <Figure 6.6.6>
- Format Disk : You can format the USB device. <Figure 6.6.7>
ҫ Note : The receiver supports FAT16 and FAT32(Recommended) of USB device, but
NTFS file system doesn`t support. If USB device is formatted by NTFS, Please
change file system to FAT32(Recommended) by PC.
- Default Recording Drive : You can change the default drive for recording. Default is C:\.
- Testing USB Speed : You can test your USB device for supporting PVR.
- Timeshift Recording Size : Choose the default time-shift size for trick mode.
<Figure 6.6.6>
6.6 USB Menu
4) Timer Manager
This submenu allows you to set on/off times of your receiver. <Figure 6.6.5>
Press to select a timer’s parameter.
Press / to change the parameter.
- Timer No : Select the timer that you want to modify. (1- 8)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press to display a Channel list pop-up; Select a channel
- Record : To record program. (off/on, This function is available when USB device is
connected)
- Power off : To your receiver power-off
CH
CH
<Figure 6.6.5>
<Figure 6.6.7>
36

39
39
6.8 Conditional Access System
To Enjoy CONAX CAS7 scrambled channels, you will need a Smart Card from the service
provider (program distributor). If you are subscribing to services from more than one service
provider, you will need a Smart Card from each one. Since a Smart Card is connected to a
single service provider, a limited range of channels will be available via it.
ҫ Note : Without the Smart Card, you can watch only Free-To-Air programs.
Insert the Smart Card into the receiver’s slot designed for it.
The message ‘Smart Card Initializing’ will appear on the screen. <Figure 6.8.1>
After the message ‘Smart Card Initializing’ has disappeared, you will be able to watch the
channels offered by the service provider.
1) Card Initializing
<Figure 6.8.1>
38
38
6.7 System Information
You can check the current information about your receiver such as receiver model name, S/W
(software) version, H/W (hardware) version, manufacturing date, etc. <Figure 6.7.1>
ҫ Note : This information is useful to download new software and/or repair the
receiver.
<Figure 6.7.1>