Struers LaboDoser-10 User manual

LaboDoser-10
Instruction Manual
Original Instructions
Doc. no.: 16377026-02_A_en-us
Date of release: 2023.01.12

Copyright
The contents of this manual are the property of Struers ApS. Reproduction of
any part of this manual without the written permission of Struers ApS is not
allowed.
All rights reserved. © Struers ApS 2023.01.13.
2 LaboDoser-10

Table of Contents
1 About this manual 4
2 Getting started 4
2.1 Device description 4
2.2 Check the packing list 5
2.3 Unpack the machine 5
3 Installation 6
4 Operating LaboDoser-10 7
5 Changing lubricant/suspension 7
6 Maintenance and service 7
7 Manufacturer 7
LaboDoser-10 3

1 About this manual
Instruction Manuals
Struers equipment must only be used in connection with and as described in the
Instruction Manual supplied with the equipment.
Note
Read the Instruction Manual carefully before use.
Note
If you wish to view specific information in detail, see the online
version of this manual.
2 Getting started
2.1 Device description
LaboDoser-10 mounted on LaboPol
ALaboDoser-10 suspension/lubricant bottle
BAdjustable valve
CDosing nozzle
DPreparation disc
4 LaboDoser-10
1 About this manual

LaboDoser-10 mounted on a LaboDoser-10 table stand
2.2 Check the packing list
The packing box contains the following items:
Pcs. Description
1 LaboDoser-10 unit with1 liter bottle
1 Allen key 3 mm
1 Bracket for doser arm
2 Hexagonal socket screws
1 Instruction Manual set
2.3 Unpack the machine
Note
We recommend that you keep all original packaging and fittings
for future use.
1. Cut the packing tape on the top of the box.
2. Remove the loose parts.
3. Remove the unit from the box.
2 Getting started
LaboDoser-10 5

3 Installation
Hint
If lubricant or suspension is not to be used for a prolonged period of
time, remove the bottle from the bottle holder and store it upright.
LaboDoser-10 can be mounted on the column of the following units:
• LaboUI
• LaboForce-50
• LaboForce-Mi
Procedure
ASuspension/lubricant
bottle
BDoser arm
CAdjustable valve
DDosing nozzle
1. Use the bracket and the two screws to mount the dosing arm on the column of
the machine.
2. Attach the bottle cap with adjustable valve onto a Struers
suspension/lubricant bottle.
3. Insert the bottle into the doser arm.
6 LaboDoser-10
3 Installation

4 Operating LaboDoser-10
The operator adjusts a valve to deliver the required amount of suspension or
lubricant on the preparation disc.
1. Place the dosing nozzle in the optimal position over the preparation disc.
2. Open the valve and adjust the suspension/lubricant dosing level.
3. When the preparation step has been completed, close the valve to stop
dosing.
5 Changing lubricant/suspension
Struersrecommends using a separate bottle cap for each consumable.
To use the bottle cap with another consumable:
1. Remove the bottle.
2. Hold the bottle firmly and remove the bottle cap.
3. Empty the bottle and fill it with a mild soap solution.
4. Open the valve and clean the dosing nozzle.
5. Exchange the soap water with clean water and repeat the above
procedure.
6. Put the bottle cap on a Struerslubricant/suspension bottle.
6 Maintenance and service
Technical questions and spare parts
If you have technical questions or when you order spare parts, state serial
number and voltage/frequency. The serial number and the voltage are stated
on the type plate of the machine.
7 Manufacturer
Struers ApS
Pederstrupvej 84
DK-2750 Ballerup, Denmark
Telephone: [phone]
Fax: [phone]
www.struers.com
4 Operating LaboDoser-10
LaboDoser-10 7

Responsibility of the manufacturer
The following restrictions should be observed, as violation of the restrictions may
cause cancellation of Struers legal obligations.
The manufacturer assumes no responsibility for errors in the text and/or
illustrations in this manual. The information in this manual is subject to change
without notice. The manual may mention accessories or parts not included in the
supplied version of the equipment.
The manufacturer is to be considered responsible for effects on safety, reliability,
and performance of the equipment only if the equipment is used, serviced, and
maintained in accordance with the instructions for use.
8 LaboDoser-10
7 Manufacturer

en For translations see
www.struers.com/Library
bg За преводи вижте
cs Překlady viz
da Se oversættelser på
de Übersetzungen finden Sie unter
el Για μεταφράσεις, ανατρέξτε στη διεύθυνση
es Para ver las traducciones consulte
et Tõlked leiate aadressilt
fi Katso käännökset osoitteesta
fr Pour les traductions, voir
hr Za prijevode idite na
hu A fordítások itt érhetők el
it Per le traduzioni consultare
ja 翻訳については、
lt Vertimai patalpinti
lv Tulkojumus skatīt
nl Voor vertalingen zie
no For oversettelser se
pl Aby znaleźć tłumaczenia, sprawdź
pt Consulte as traduções disponíveis em
ro Pentru traduceri, consultați
se För översättningar besök
sk Preklady sú dostupné na stránke
sl Za prevode si oglejte
tr Çeviriler için bkz
zh 翻译见