Sub-Zero 427RG Guide

Wine Storage Models 427G and 427RG Design Guide

Features and specications are subject to change at any
time without notice. Visit subzero.com/specs for the most
up-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions may
vary by ± 1/8"(3). Dimensions in parentheses are millimeters
unless otherwise specied.
Contents
3Wine Storage
4Specications
6Custom Panels
10 Full-Scale Template
11 Warranty

subzero.com/specs | 3
Wine Storage
MODELS 427G AND 427RG
Wine nds a well-deserved place of honor in a Sub-Zero
wine storage unit. Every detail is designed to ensure better
wine preservation. Cherrywood-faced racks, soft lighting,
custom cabinetry if desired—Sub-Zero helps make a wine
collection an element of beauty in the home.
KEY FEATURES
•Custom front panels and hardware allow for innite
design options.
•Full-view glass door standard on both models.
•Discreet interior lighting with illuminated display rack for
prized bottles of wine.
•Two independent storage zones maintain temperature,
humidity and UV protection.
•Model 427RG features two refrigerator storage drawers.
•Roller-glide wine racks with natural cherrywood facing
have three-quarter extension for easy access.
•Wine racks accommodate 750 ml bottles, half-bottles
and magnums.
WINE STORAGE
Model 427G Model 427RG

4 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
27" (686)
14"(356)
13/16"
(21)
80"
(2032)
OPENING
HEIGHT
24" (610)
789/16"
(1995)
815/16"
(227)
4"
(102)
HEIGHT DIMENSIONS ±
1/2" (13)
24"
(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
251/2"
(648)
45/8"
(117)
27" (686)
14"(356)
13/16"
(21)
341/2"
(876)
203/8"
(518)
101/4"
(260)
131/4"
(337)
1/2"
(13)
3/8"
(10)
80"
(2032)
OPENING
HEIGHT
24" (610)
789/16"
(1995)
93/4"
(248)
4"
(102)
HEIGHT DIMENSIONS ±
1/2" (13)
24"
(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
191/2"
(495)
251/2"
(648)
45/8"
(117)
Overall Dimensions
MODEL 427G
Overall dimensions do not include panels or handles.
Dimensions will vary with panel thickness.
MODEL 427RG
SPECIFICATIONS
STORAGE CAPACITY R CU FT (L) BOTTLES (750 ML)
427G 132
427RG 5.3 (150) 78
SHIPPING WEIGHT LB (KG)
427G 395 (179)
427RG 410 (186)

subzero.com/specs | 5
WINE STORAGE
OPENING DIMENSIONS
MODEL W H
427G 27" (686) 80" (2032)
427RG 27" (686) 80" (2032)
The depth of each integrated model is 24" (610). Allow for
panel thickness when planning the nished opening depth.
DUAL INSTALLATION
When installing two integrated units (models 427G and
427RG) side by side in a dual installation, the opening
width is the width of the two units added together. A dual
installation kit will be required for this installation. If a dual
installation kit is not specied, a minimum 2" (51) ller strip
is required between units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com. For ques-
tions regarding the installation, call Sub-Zero customer care
at 800-222-7820.
Opening Dimensions
MODELS 427G AND 427RG
25" (635)
OPENING
DEPTH
W
OPENING WIDTH
H
OPENING
HEIGHT
SIDE
VIEW
TOP VIEW
FRONT VIEW

6 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Electrical
The electrical supply should be located within the shaded
area shown in the illustration below. A separate circuit, ser-
vicing only this appliance is required. A ground fault circuit
interrupter (GFCI) is not recommended and may cause
interruption of operation.
If the unit will be connected to a home security system,
allow 36" (914) of excess wiring for proper connection.
IMPORTANT NOTE: For models 427G and 427RG, it is
critical the electrical outlet be positioned with the grounding
prong to the right of the thinner blades.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
13" (330)
1/4"
(6)
41/2"
(114)
LEFT SIDE
OF OPENING
FLOOR
21/2"
(64)
Models 427G and 427RG.
Custom Panels
For integrated applications, custom door/drawer panels and
handle hardware must be provided. Finish all sides of the
custom panels. They may be visible when the door/drawer
is open or through the window of the glass door.
The custom door panel will attach directly to the door with
screws through a series of pre-drilled holes. For model
427RG, drawer panels will attach using mounting brackets
supplied with the unit. Refer to the panel requirements chart
below and integrated panel dimensions on the following
page.
The thickness of the custom panel can vary. A minimum
5/8"(16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each model is 24" (610). Allow for panel thickness
when planning the nished opening depth.
CAUTION
When using a 3/4"(19) or thicker panel with a reveal less
than 1/4"(6), panel may cause damage to the unit when
door is opened to 105°. Use the built-in 90° door stop.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
Door 20 lb (9 kg)
Drawer (427RG) 12 lb (5 kg)
PANEL THICKNESS MIN
All Panels 5/8"(16)

subzero.com/specs | 7
WINE STORAGE
Custom Panels
Do not install a solid panel on a glass door unit. A solid door
is available as a sales accessory and must be installed if a
solid panel is specied. Service may be required to install
the door. Contact an authorized Sub-Zero dealer for more
information. Overall dimensions are the same for glass and
solid door panels.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are available through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
An optional lock kit is available. Review the lock kit
instructions to ensure your panels will allow for adequate
installation. These instructions are available on our website,
subzero.com/specs.
INTEGRATED PANEL DIMENSIONS
W
453/8"
(1153)
139/16"
(345)
1611/16"
(424)
W
757/8"
(1927)
B
C
AA
B
C
AA
427G 427RG
Typical panel dimensions are based on an 80" (2032) overall
height, 4" (102) toe kick and 1/8"(3) reveals. Panel dimen-
sions must be adjusted accordingly for all other installations.
Refer to the illustration above for panel height and the chart
below for panel width.
PANEL WIDTH
MODEL W
427G 263/4"(679)
427RG 263/4"(679)
STILES / RAILS (MIN) A B C
427G 21/4"(57) 33/4"(95) 8" (203)
427RG 21/4"(57) 33/4"(95) 3" (76)
DUAL INSTALLATION
For dual installations, refer to the illustration above for panel
height and the chart below for panel width.
PANEL WIDTH—DUAL INSTALLATION
MODEL W
427G 2613/16"(681)
427RG 2613/16"(681)
STILES / RAILS (MIN) A B C
427G 21/4"(57) 33/4"(95) 8" (203)
427RG 21/4"(57) 33/4"(95) 3" (76)

8 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the
typical panel height, provided it does not exceed the weight
limit. Refer to the illustration below.
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the
typical toe kick height, provided it does not exceed the
dimensions in the illustration below.
INTEGRATED UNIT
(SIDE VIEW)
11/2"
(38)
25" (635) TO WALL
HINGE
DECORATIVE VALANCE
CANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
DECORATIVE VALANCE
REMOVABLE MOLDING
TYPICAL
HEIGHT
OF DOOR
PANEL
MINIMUM
HEIGHT
OVERALL
HEIGHT
1/8"(3)
1/8"(3)
DOOR
PANEL
Upper valance—side view.
25" (635) TO WALL
HEIGHT
OF PANEL
INTEGRATED UNIT
(SIDE VIEW)
25/8" (67) TO 4" (102)
BASE MOLDING
MUST BE
REMOVABLE—
4" (102) MAX
HEIGHT
KICKPLATE / GRILLE
CAN BE ADJUSTED
FORWARD
KICKPLATE / GRILLE
4" (102) TO 9" (229)
FROM FLOOR
Toe kick—side view.

subzero.com/specs | 9
Standard Handles
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for standard handle lengths for
models 427G and 427RG.
HANDLE LENGTH
WINE STORAGE TUBULAR PRO
427G Door 501/8"(1273) 483/8"(1229)
427RG Door 331/4"(845) 311/2"(800)
427RG Drawer 243/16"(614) 21" (533)
WINE STORAGE

Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service
marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc.
All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
10 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Wine Rack Wood Facing
FULL-SCALE TEMPLATE
The natural cherrywood facing on wine storage racks can
be stained and sealed, or replaced with wood more comple-
mentary to surrounding cabinetry. Refer to the full-scale
template below for prole dimensions of the wood facing
and the chart for width.
A(WIDTH)
11/2" (38)
5/8"
(16)
7/64"
(3)
5/64"
(2)
23/64"
(9)
9/16" (14)
27/32"
(21)
MAXIMUM THICKNESS
FRONT VIEW SIDE VIEW
Wine rack wood facing.
WIDTH
MODEL A
427G 2015/16"(532)
427RG 2015/16"(532)