Summer Deluxe Baby Bather User manual

DROWNING HAZARD: Babies have drowned while using infant bathers.
• STAY in arm’s reach of your baby.
• Use ONLY in empty adult tub or sink.
• Keep drain open in adult tub or sink.
• Never rely on a toddler or preschooler to help your baby or alert you to trouble. Babies have drowned
even with other children in or near bath tub.
• Infants can drown in as little as 1 in. (2.5 cm) of water. ALWAYS bathe your infant using as little
water as necessary.
FALL HAZARD: Babies have suffered head injuries falling from infant bathers:
• Place bather ONLY in adult tub or in sink for safe use.
• NEVER lift or carry baby in the product.
• STOP using product when baby starts trying to sit up or has reached 20lbs (9.1kg), whichever comes first.
• NEVER bathe baby until you have tested the water temperature. ALWAYS check water temperature before
placing child into product.
• Bath water should be between 90˚ F and 100˚F (32.2˚C and 37.8˚C).
• Suitable for babies 0-6 months or until they are able to sit up unassisted.
• Make sure all the pieces are properly assembled before placing infant in product.
• NEVER adjust product with infant inside the product. Remove infant before moving or making adjustments.
• NEVER use on uneven or elevated surfaces.
• NEVER make adjustments or change recline position to product with child in bather.
Remove child before adjusting or removing product.
• Discontinue use of product if damaged, broken or disassembled.
• This product is not a toy. DO NOT allow children to play with it.
Please retain information
for future reference.
Colors and styles may vary.
MADE IN CHINA.
D0000001036 8/22
Please read the following instructions and warnings
carefully and keep for future reference.
We’re here to help! If you have questions or need assistance,
please contact our Consumer Relations Team at 1-401-671-6551
or www.summerinfant.com/contact.
Deluxe Baby Bather
Instruction Manual
•Remove fabric cover (and warming wings on certain models). Machine wash on delicate cycle with no bleach.
Wipe frame with a damp cloth and mild soap.
•Put fabric cover and warming wings back on frame. Air dry.
Please check the following before each use:
•The seams in the fabric
•Ensure the frame backrest support leg is properly snapped into one of the slots on the base.
•Do not use the bather if any components are damaged.
WARNING
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
401-671-6551
©2022 Summer Infant (USA), Inc.
Summer Canada, Ltd.
200 First Gulf Blvd., Unit C
Brampton, Ontario,
Canada L6W 4T5
905-456-8484
cleaning & maintenance

bather setup
folding the bather
Rotate footrest
down until it locks
into place!
Squeeze the
footrest bars
together & fold
footrest up!
Pull the
backrest bars out
from the knuckles
& fold the
backrest over!
Pull the backrest bars out
from the knuckles
& fold the backrest over!
123
Slide the
seat cover o
of the backrest!
FINISHED!
click!
click!
click!
click!
click!
click!
Unfold the
backrest
until it locks
into the
knuckles!
1
On the back
of the bather,
rotate the
backrest
support & lock
into groove!
1
23
Unlock backrest
support & rotate
under!
FINISHED!
pull!
pull!
pull!pull!
pull!pull!pull!pull!
pull!
pull!
pull!
pull!pull!pull!pull!
squeeze!squeeze!
squeeze!squeeze!
squeeze!
23
removing the fabric
reclining the backrest
squeeze!
123
4
56
warming wings
(only on certain models)
Squeeze the footrest bars
together, then fold
footrest up!
Press the tab to unlock
backrest support
& lift out
Slide the
seat cover
o of the
footrest!
Slide the fabric
o the frame.
Release support
legs from bather base by
rotating the legs until key
can slide out of slot!
Wrap warming
wings around child
during bathtime.
Attach wings by
lining up hook and
loop strips and
applying pressure.
Press the tab
to unlock
backrest
support
& lift out!
Reposition
backrest
support & lock
into place!
Reposition
backrest
support & lock
into place!