SET UP & USE
(continued):
•
To
charge battery, plug the Monitor Adapter into the Monitor's
AC
Adapter Jack.
Plug
the other end into a standard electrical outlet.
• After initial
12-16
hour charge, to achieve optimal battery life,
charge battery overnight and unplug all
day
during
use.
• Note: Only charge battery when the Battery
Life
Indicator
is
low.
Constant recharging of your battery before low battery indicator
light comes
on
will decrease the life of your batteries.
• When battery
is
low, the
Power
On
LED
will also illuminate amber,
indicating that the battery needs to be recharged.
•
To
conserve battery power,
use
AC
Adapter whenever possible.
Remove
battery during long periods of
non-use.
•
If
battery
is
exhausted, remove immediately from the Monitor.
• Properly dispose of exhausted battery.
Battery
Installation:
Note:
This
step
is
only needed if replacing battery.
1.
Locate the batterycompartment door
on
back of monitor.
2.
Remove
batterydoor screw with flat head
...
--,..,r----,
screwdriver.
3.
Remove
batterydoor and battery.
4.
Insert new batteryand replace battery door
(Figure C).
Belt
Clip:
For
convenience and portability, you can clip
the Monitor to your belt or waistband after a
battery
has
been installed (Figure
D).
Footrest:
The
Monitor
has
a built-in footrest for tabletop
convenience. Simply flip out footrest and place
the Monitor
on
a stable, level surface (Figure
E).
Synching
Monitor
and
CAMERA:
The
Monitor and Camera are synched at the factory
for privacy reasons.
If
the Monitor and Camera are
not synching with each other for any reason, please
sync
them
as
described below.
Step
1:
Move the Monitor to the same area
as
the Camera. With
both the Camera and Monitor
on,
press
the
"POWER"
button once to
call up the
OPTION
menu. Using up and down arrows
on
side of
monitor, scroll to
"ADD
CAM" and
press
OK
button.
6
SET
UP
& USE
(continued):
Step
2:
The
Power
LED
will flash green and within 8seconds,
press
the "CODE" button once
on
the back of the camera.
Step
3:
The
Power
LED
on
the camera will flash and you should then
see
a picture from the Camera
on
the Monitor.
Step
4:
If
this
is
unsuccessful,
you should repeat steps above making
sure
the
Camera and Monitor are
close
enough
to each other
for
synching.
TIPS FOR
IMPROVING
RECEPTION:
• Position
the
Monitor
closer
to
the
CAMERA
if
necessary.
•
Move
Monitor
away
from
other
monitors, cordless phones,
walkie-talkies, etc.;
moving
even
slightly
could
greatly
improve
reception.
• If
you
hear
a
feedback
or
squealing
noise,
move
the
CAMERA
and
the
Monitor
further
away
from
each
other.
SPECIAL FEATURES:
• Video
Sleep
Mode:
While
operating
on
battery
power, the
video
screen will
go
to
sleep,
to
conserve
battery
power.
Audio
and
sound lights will function normally.
Press
the
Video
On/Off
to
resume
viewing.
This
option
is
NOT
available
when
using AC
adapter.
• Sound Lights: The 4 Sound Lights will illuminate on the
Monitor
depending
on the level
of
your
baby's
sounds. For
example,
if
your
child
is
just cooing,
only
one
or
two
lights will illuminate. If
your
baby
is
crying, several will illuminate,
depending
on
how
loud she
is
crying.
This
feature
is
particularly helpful if you
are
in a noisy room.
• Quick
ViewNideo
On/Off
Button: This button turns the
video
mode
on. If you
only
want
to
hear
your baby, press
the
Quick
ViewNideo
On/Off
Button
again
to
shut
off
the
video.
The
Quick
ViewNideo
On/Off
Button
is
ideal
for easily turning on
the
video
option
in
the
middle
of
the
night.
•
Night
Vision:
In
a
darkened
room, the
Monitor
will
automatically
use its infrared
LED's
to
transmit a
clear
image
of
baby, so you can see
your
child
at
night!
• Multi·Position Camera/Microphone: The
Camera/Microphone
should
be
positioned
so
it
is
facing
baby
as much as possible.
This
multi-position feature
is
unique
to
Summer Infant nursery monitors. It
allows
the microphone
to
focus on
baby's
voice
while
filtering out other household
noises. 7
