Sunny SF-B2710 User manual

TOTAL BODY BIKE
SF-B2710
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your
satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED
US: [email protected] or 1- 877 - 90SUNNY (877-907-8669).

1
IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use this
equipment correctly. It is important to read this entire manual before assembling and using the
equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained,
and used properly. It is your responsibility to ensure that all users of the equipment are informed of
all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to determine if you
have any medical or physical conditions that could put your health and safety at risk or prevent
you from using the equipment properly. Your physician’s advice is essential if you are taking
any medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop
exercising if you experience any of the following symptoms: pain, tightness in your chest,
irregular heartbeat, shortness of breath, lightheadedness, dizziness, or nauseous feeling. If you
do experience any of these conditions, you should consult your physician before continuing with
your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet.
To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of
the equipment can only be maintained if it is regularly examined for damage and/ or wear and
tear.
6. Always use the equipment as indicated. If you find any defective components while assembling
or checking the equipment, or if you hear any unusual noises coming from the equipment during
exercise, discontinue use of the equipment immediately and do not use until the problem has
been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may
become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 265 pounds(120KG).
10.This equipment is not suitable for therapeutic use.
11.To avoid bodily injury and/ or damage to the product or property, proper lifting and moving are
required.
12.Your product is intended for use in cool and dray conditions. You should avoid storage in
extreme cold, hot or damp areas as this may lead to corrosion and other related problems
13.This equipment is designed for indoor and home use only; it is not intended for commercial use.

2
EXPLODED DRAWING

3
PARTS LIST
No.
Description
Spec.
Qty.
No.
Description
Spec.
Qty.
1
Carriage Bolt
M8*65
4
48
Screw
M8*48
1
2
Curved Washer
∅8*∅18
4
49
End Cap
∅25.4
3
3
Spring Washer
∅8*∅14
8
50
Flat Washer
∅8*∅18
7
4
Cap Nut
M8
7
51
Nylon Nut
M8
4
5
Adjustable End Caps
∅50
2
52
Press Wheel
1
6
Rear Stabilizer
∅50*395mm
1
53
Cap
15*20
3
7
Front Stabilizer
∅50*395mm
1
54
Rear Main Frame
1
8L/R
Front Wheel L/R
∅50
2
55
Front Main Frame
1
9
Screw
M4*20
8
56
Bushing
30*60
1
10
Crank Cover
∅23.5*8
2
57
Pin
∅10*116
1
11
Stop Nut
M10
2
58
Cover
1
12L/R
Pedal (L/R)
1/2"
2
59
Ankle Strap
1
13L/R
Crank (L/R)
5 Inch
2
60
Hex Bolt
M6*60
2
14
Screw
M4*20
4
61
Wheel
∅34*16
2
15
Chain Cover (L/R)
2
62
Wheel
∅38*14
4
16
Screw
M6*12
7
63
Nut
M6
2
17
Round Plate
∅74*∅30*1.5
2
64
Bracket
2
18
Bearing
6003Z
2
65
Pin
∅10*53
4
19
Bearing Bracket
∅35*∅74*12.5
2
66
Ring
∅10
4
20
Ring
∅17.5*∅20*1.0
5
67
Seat Tube
1
21
Pulley
1
68
Seat
1
22
Magnetic Bracket
∅152*1.3kg
1
69
Carriage Bolt
M8*45
2
23
Curved Washer
∅17.5*∅21*0.3
1
70
Backrest Tube
1
24
Nut
M10
3
71
Cap
30*30mm
1
25
Adjustable Nut
2
72
Cap
15*30mm
4
26
Flat Washer
∅10.5*20*2.0
2
73
Carriage Bolt
M8*75
1
27
Nut
M10*3.0
1
74
Screw
M6*40
4
28
Small Pulley
∅14*94
1
75
Flat Washer
∅6*∅14
6
29
Belt
230J
1
76
Back Tube
1
30
Belt
220J
1
77
Backrest
1
31
Hex Nut
M8*20
2
78
Handle
2
32
Big Flat Washer
∅8.5*∅24
2
79
Exercise Band
∅6*1080mm
2
33
Axle
∅15*104
1
80
Tension Knob
1
34
Bushing
∅20*∅25*10mm
4
81
Flat Washer
∅5.5*∅12
1
35
Bushing
∅20*∅24*20mm
2
82
Screw
M5*50
1
36
Magnetic
117*33
1
83
Hand Pulse Wire
1
37
Tension Spring
1
84
Handlebar
1
38
Screw
M6*10
1
85
Screw
M5*12
4
39
Sensor Wire
1
86
Meter
1
40
Bolt
M10*110
1
87
Screw
M6*15
4
41
Bushing
∅28*∅10.5
2
88
Spring Washer
∅6*∅14
4
42
Adjustable Tube
1
89
Foam Grip
∅25.4
2
43
Flat Washer
∅10.5*∅22
2
90
Curved Washer
∅6*∅14
2
44
Nut
M10
2
91
Hand Pulse
2
45
Release Knob
M16
2
92L/R
Pedal Strap
2
46
Bushing
32*1.5/25*1.5
1
A
Spanner
S13-14-15
1
47
Adjustable Set
1
B
Allen Wrench
S5
1

4
HARDWARE PACKAGE
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify the part(s) needed:
✓ The model number (found on cover of manual)
✓ The product name (found on cover of manual)
✓ The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near the front
of the manual)
Please contact us at [email protected] or 1- 877 - 90SUNNY (877-907-8669).

5
ASSEMBLY INSTRUCTIONS
STEP 1
Loosen and pull the Release Knob (No. 45) from
the folded Rear and Front Main Frame (No. 54
and No. 55) and unfold.
Attach Rear Stabilizer (No. 6) to the Front Main
Frame (No. 55) using 2 Curved Washers (No. 2),
2Spring Washers (No. 3), 2 Carriage Bolts (No.
1) and 2 Cap Nuts (No. 4). Secure and tighten with
Spanner (No. A).
Attach Front Stabilizer (No. 7) to Rear Main
Frame (No. 54) with 2 Curved Washers (No. 2), 2
Spring Washers (No. 3), 2 Carriage Bolts (No. 1)
and 2 Cap Nuts (No. 4). Secure and tighten with
Spanner (No. A).
STEP 2
The Left Pedal (No. 12L) is marked L and the
Right Pedal (No. 12R) is marked R. Turn the
resistance knob all the way to the right until the
cranks are immobilized.
Align the Left Pedal (No. 12L) with the Left Crank
(No. 13L) at 90°. Gently insert the Left Pedal (No.
12L) intotheLeft Crank (No. 13L) and turn the Left
Pedal (No. 12L) counterclockwise and use
Spanner (No. A) to tighten.
Attach the Right Pedal (No. 12R) with the Right
Crank (No. 13R), at 90°. Gently insert the Right
Pedal (No. 12R) into the Right Crank (No. 13R)
and turn the Right Pedal (No. 12R) clockwise and
use Spanner (No. A) to tighten.
Attach the 2 Pedal Straps (No. 92L/R) to the
Pedals (No.12 L/R).

6
STEP 3
Remove the pre-assembled 3 Nylon Nuts (No.
51) and 3 Flat Washers (No. 50) from the back
of the Seat (No. 68) with Spanner (No. A).
Attach the Seat (No. 68) to the Seat Tube (No.
67) with 3 Nylon Nuts (No. 51) and 3 Flat
Washers (No. 50) that were removed. Secure
and tighten with Spanner (No. A).
Remove the pre-assembled 2 Carriage Bolts
(No. 69), 2 Flat Washers (No. 50), 2 Cap Nuts
(No. 4) and 2 Spring Washers (No. 3) from the
Backrest Tube (No. 70) with Spanner (No. A).
Attach the Backrest Tube (No. 70) to the Seat
Tube (No. 67) with 2 Carriage Bolts (No. 69), 2
Flat Washers (No. 50), 2 Spring Washers (No.
3) and 2 Cap Nuts (No. 4) that were removed.
Secure and tighten with Spanner (No. A).
Remove the pre-assembled 4 Screws (No. 74)
and4 Flat Washers (No. 75) from Backrest (No.
77) with Allen Wrench (No. B). Then attach
Backrest (No. 77) to Backrest Tube (No. 70)
with 4 Screws (No. 74) and 4 Flat Washers (No.
75)that were removed. Secure and tighten with
Allen Wrench (No. B).

7
STEP 4
Loosen and pull out Release Knob (No. 45), then
insert Seat Tube (No. 67) into Rear Main Frame
(No. 54). Insert and tighten Release Knob (No.
45) to secure.
STEP 5
Attach Handlebar (No. 84) to the Front Main
Frame (No. 55) with 4 Screws (No. 87), 2Flat
Washers (No. 75), 2Curved Washers (No.
90), and 4 Spring Washers (No. 88). Secure
and tighten with Allen Wrench (No. B).

8
STEP 6
Remove 4 Screws (No. 85) from the back of
the Meter (No. 86) with Allen Wrench (No. B).
Attach Meter (No. 86) to the Front Main
Frame (No. 55) with 4 Screws (No. 85) that
were removed. Insert Sensor Wire (No. 39)
into the hole on the back of the Meter (No. 86).
Make sure the wire does not get caught when
you attach the meter.
Insert Hand Pulse Wire (No. 83) into the hole
on the back of the Meter (86).
STEP 7
Connect Ankle Strap (No. 59) to the Exercise
Bands (No. 79) above the Cover (No. 58).
Connect the 2 Handles (No. 78) to the
Exercise Bands (No. 79) above the Tension
Knob (No. 80).
.

9
ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION OF BIKE
Adjust the tension of bike by rotating the Tension Knob
(No. 80)clockwise to increase the level of resistance.
Rotate the knob counter-clockwise to decrease the level of
resistance.
ADJUSTING THE TENSION OF EXERCISE BANDS
Adjust the tension of Exercise Bands (No. 79) by pulling
out Pin (No. 57)and moving Cover (No. 58) to desired
setting. Insert Pin (No. 57) into one of the three holes.

10
ADJUSTMENTS & USAGE GUIDE
FOLDING THE BIKE
Loosen and pull the Release Knob (45), fold the bike,
and then engage Release Knob (45) into one of the
preset holes and tighten
MOVING THE BIKE
First fold the bike according to the instructions above.
To move the bike, hold Handlebar (No. 84) and tilt the
bike until the Movable Wheel located on the front
stabilizer end cap touch the ground. With the wheels on
the ground, you can transport the bike to the desired
location with ease.
CLEANING
The bike can be cleaned with a soft clean damp cloth. Do not use abrasives or solvents on plastic
parts. Please wipe your perspiration off the bike after each use. Do not get moisture on the
computer display panel as this might cause an electrical hazard or electronics to failure.
Please keep the bike, especially the computer, out of direct sunlight to prevent screen damage.
Please inspect all assembly bolts and pedals on the machine weekly to ensure they are tightened
properly.
STORAGE
Store the bike in a clean and dry environment away from children.
TROUBLESHOOTING
PROBLEM
SOLUTION
There is no display on the computer.
1. Verifythe wire that comes from the front main
frame is properly connected to the computer.
2. Check if the batteries are correctly
positioned and battery springs are in
proper contact with batteries.
3. The batteries in the computer may be dead.
Change to new batteries.
The bike wobbles when in use.
Turn the rear stabilizer end cap on the rear stabilizer
as needed to level the bike.
The bike makes squeaking noise when in use.
The bolts may have become loose on the bike.
Please inspect all of the bolts and tighten any
loosened bolts.

11
USING THE BIKE
Using the Total Body Bike, you can do a variety of exercises as below.

12
METER INSTRUCTIONS
AUTO ON/OFF: The meter will turn on when you press MODE key.
After 4 minutes of inactivity, the meter will shut off automatically.
FUNCTION BUTTONS
MODE: Press for 2 seconds to turn on meter.
SET: During STOP mode, press to increase the value of TIME, DISTANCE or
CALORIES.
RESET: During STOP mode, press to clear value or setting value to zero.
FUNCTIONS
1. SCAN: Meter will automatically rotate the display the functions in the functions in the following
order: TIME –SPEED –DISTANCE –CALORIE –RPM –PULSE.
2. TIME: Shows the workout time elapsed (0:00 to 99:59).
3. SPEED: Displays your workout speed (0.0 to 99:0 miles per hour).
4. DISTANCE: Displays the distance of each workout (0 to 99.9 miles).
5. CALORIES: Displays the estimated calories burned.
6. PULSE: Displays your pulse in beats per minute.
OPERATING INSTRUCTIONS
Press MODE to turn on the meter. Press MODE to select SCAN or to select a function to be
displayed.
COUNTDOWN FUNCTION (TIME, DISTANCE, or CALORIE)
During STOP mode, press MODE to select TIME, DISTANCE or CALORIE. Press SET to increase
the value. Press MODE to accept the set value. When you start pedaling, the meter will countdown.
Once the meter has reached 0, it will beep and start counting up again.
BATTERIES
This meter uses 2 AA batteries, which are included.
How to replace the batteries:
Please take off the battery cover from the bottom housing, then replace the batteries.
When changing the batteries, change both at the same time. Do not mix battery types. Do not mix
old and new batteries. Dispose of old battery according to your regional guidelines.
Version 1.2