Sunnydaze Decor QC-236 User manual

 
Fountain 1
Electric Submersible Pump 1
Light Splitter Cable 1
AC Adapter 1
GPF180100 Page 1 / 2
GROTTO FALLS WATER FOUNTAIN WITH LED LIGHTS
QC-236
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.


ASSEMBLY
1. Connect the electric submersible pump to the tubing that is built into the fountain. Place the pump into the water
reservoir and run the power cord out the back of the fountain.
2. Locate the light cables inside the fountain and rmly connect them to the light splitter cable, ensuring the plastic collar
is secure. Light cables and splitter are designed to be inside the fountain.
3. Run the excess light cable out the back of the fountain and rmly connect the AC adapter.
4. Fill the fountain with enough water to keep the pump fully submerged during operation.
5. Plug the power cords into a properly grounded GFCI outlet.
Note: When rst used, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
12/2019
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Ensure all parts are accounted for
before disposing of packaging. NOTE: The water tubing is built into the fountain. Take care
when handling the water tube; detaching the water tube from the
fountain will damage the fountain and void the product warranty.
1
2
3
4
5
Pump
Light

GPF180100 Page 2 / 212/2019
USE & CARE
• For outdoor use only.
• The lighting feature of this fountain is optional. To turn the lights off, simply unplug the 2-prong power cord.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as
it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required, avoid heavily
chlorinated tap water as it may damage the fountain or pump.
• Periodically change the water to reduce scale and buildup — clean the fountain and pump regularly for optimal
performance and appearance.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use a pressure washer or abrasive materials to wash the fountain.
• Always shut off the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing temperatures, drain the fountain, disconnect the pump and store indoors; allowing ice to form may
crack the fountain and will damage the pump.

IMPORTANT INFORMATION
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage



TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water to the reservoir if necessary.
• Check the pump and tubing for obstructions.
• Check the flow control on the body of the pump as it may need to be adjusted to achieve the desired flow rate.
• If lights are not working, ensure the cables are fully connected and the plastic collars are adequately tightened
(do not over-tighten the collars).
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air
which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug it
back in.
• Some splashing is normal; adjust the flow rate on the pump if the water rate is too high.
• Check to make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned
at the top of page 1. To expedite response time, please have the item number and order information available.