Sunnydaze Decor XSS-554 User manual

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion,
within the one-year warranty period. Proof of purchase, with the date of purchase as well as photos of the defective merchandise, must be provided. If you have any
questions, comments or concerns please feel free to contact us by phone at: 888-881-4668. You may also contact us by email: [e-mail],
or via our webpage at: www.serenityhealth.com/contact-us/
2-TIER COBBLESTONE LOOK OUTDOOR FOUNTAIN
PART
DESCRIPTION
QUANTITY
PART
DESCRIPTION
QUNAITITY
A
FOUNTAIN TOPPER
1
E
WATER PUMP
1
B
MIDDLE PEDESTAL
1
F
LED ROPE
1
C
FOUNTAIN BASIN
1
G
EVA STOPPLE
1
D
BASE PEDESTAL
1
H
ADAPTOR
1
ASSEMBLY INSTRUCTIONS:
Step 1: Place the base pedestal (D) and the fountain
basin (C) on a level surface, insert the fountain basin(C)
into the base pedestal (D) and twist clockwise to lock
the fountain basin(C).
Step 2: Route the water pump(E)’s power cord out
through the plastic tube in the fountain basin(C), lay the
water pump(E) in the bottom of the fountain basin(C),
and then route the water pump(E)’s power cord
through the base pedestal(D), the cord exits through
the bottom slot of the base pedestal(D). Lastly insert
the EVA stopple(G) in the top of the plastic tube
Step 3: Insert, twist and lock the fountain topper(A) to
the middle pedestal(B).
Step 4: Connect the water tube to the outlet nozzle of
the water pump(E).
Step 5: Connect the LED rope(F) with the water
pump(E)’s shorter power cord, route the LED rope out
through the hole on the back side of the middle
pedestal(B).

WARNING
Step 6: Insert, twist and lock the assembled middle
pedestal(B) and fountain topper(A) to the fountain
basin.
Step 7: Press both ends of the LED rope in the slots that
already fixed in the fountain basin, the LED
Step 8: Connect the adaptor (H) to the water pumps
power cord.
Step 9: Fill the fountain basin (C) and the small basin on
the middle pedestal (B) with water. Make sure the
water pump (E) is submerged in the water completely.
Step 10: Plug the pump in and enjoy the water fountain.