Sunnydaze Decor MERANTI STR-534 User manual

Page 1 / 2MCT-111
MERANTI WOOD COFFEE TABLE
STR-534
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

  
ATable Top 1
BLeg Panel 2
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
HELPFUL HINT
Do not fully tighten hardware until all components are assembled. If hardware is tightened too soon, mounting
holes may not align, and parts may not easily t together.
WARNING
CHOKING HAZARD — This item contains small parts
that can be swallowed by children. Keep children away
during assembly.
  
1JCBC M6 x 75mm Bolt
with Barrel Nut 4
2Barrel Nut Driver 1
3Hex Key 1
NOTE: Save the hex key to use in the event hardware becomes loose and
needs to be tightened.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2020

Page 2 / 2
ASSEMBLY
Read carefully and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely assembled.

WARNING:


General Use & Care
MCT-111
75mm
A
B
75mm
75mm
B
75mm
SAFE USE: For residential use only. Only use on a at, level surface. Do not sit or stand on the table.
MOVING: Always lift furniture when moving it around, never drag it.
I N S P E C T: Periodically check bolts and tighten as necessary.
EXPOSURE: Over time, sunlight and weather elements may degrade and change the color of natural wood. Avoid
leaving wooden furniture in the rain or high-humidity climates as wood expands and contracts with moisture and humidity
changes. If this item is not used for extended periods, cover it with a breathable cover or store it indoors.
WINTER CARE & STORAGE: Protect this item from inclement weather, especially ice and snow. Move it to an indoor
location that is cool and dry. Covering while in storage is recommended to help prevent dust build-up.
CLEANING: Identify the direction of the woodgrain and wipe dust and debris using a soft, dry cloth. Surface mildew can
be washed away using a very mild solution of soap and water and a soft cloth; after drying, oil treatment is recommended.
MAINTENANCE:Left untreated, the wood will turn a silvery gray color. To maintain the appearance, apply a suitable
penetrating Wood, Teak or Linseed Oil (not included) twice a year. Bring furniture indoors and allow it to dry for at least
12 days before applying oil. Only apply oil to wooden surfaces. Use a soft cloth or soft brush and carefully apply oil as
directed by the wood oil manufacturer.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
• Place Table Top (A) upside-down on a soft, clean surface.
• Insert 4x Barrel Nut into table top, as shown. Use the Barrel Nut Driver (2) to align the barrel nut with the hole on the
outside of the table top.
• Affix Leg Panel (B) to the table top. Hand-tighten 2x JCBC M6 x 75mm Bolt through each leg panel; ensuring the
bolt threads into the barrel nut.
• Tighten all hardware using Hex Key (3). Do not over-tighten, as doing so may damage the wood.
08/2020