Sunnydaze Decor MERANTI FRN-893 User manual

MERANTI WOOD STORAGE BENCH
FRN-893

Page 1 / 388891
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly and
assembling the item soon after purchase.
• Do not fully tighten hardware until all components are assembled.
If hardware is tightened too soon, mounting holes may not align,
and parts may not easily fit together.
  
ABackrest 1
BRight Arm 1
CLeft Arm 1
DPanel 2
ELid 1
FBottom Panel 2
HHinge 2
IJCBC M6x40 Bolt 4
JJCBC M6x60 Bolt 8
KHex Key 1
LJCBC M6x15 Bolt 8
MBarrel Nut 8
NBarrel Nut Driver 1
WARNING
CHOKING HAZARD — This item contains small parts that can be
swallowed by children. Keep children away during assembly.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
2-PERSON
ASSEMBLY
RECOMMENDED
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/2020


Read carefully and understand assembly before beginning.
Do not fully tighten bolts until all components have been loosely assembled.
Page 2 / 3
STEP 1
B: 1
D: 2
J: 4
M: 4
Do not fully tighten any bolts until after Step 6 is complete.
STEP 2
C: 1
J: 4
M: 4
STEP 3
H: 1
L: 2
STEP 4
E: 1
L: 2
• Fasten Hinge (H) to the inside of the storage box by
hand-tightening 2x M6x15 Bolt (L), as shown.
• Repeat this step on the left side of the storage box.
Do not fully tighten any bolts until after Step 6 is complete.
Do not fully tighten any bolts until after Step 6 is complete.Do not fully tighten any bolts until after Step 6 is complete.
88891
• Insert 2x Barrel Nut (M) into each Panel (D). Use the
Barrel Nut Driver to align the barrel nut with the hole on
the side of the panel.
• Align the pegs on Panel (D) with the holes on the inside
of Right Arm (B), as shown.
• Hand-tighten 4x M6x60 Bolt (J); ensure the bolts thread
into the barrel nuts.
• Insert 2x Barrel Nut (M) into each Panel (D). Use the
Barrel Nut Driver to align the barrel nut with the hole on
the side of the panel.
• Align Left Arm (C) with the pegs on the storage box
panels and hand-tighten 4x M6x60 Bolt (J), ensure the
bolts thread into the barrel nuts.
• Align Lid (E) with the top of Hinge (H) and hand-
tightening 2x M6x15 Bolt (L).
• Repeat this step on the left side of the storage box lid.
07/2020

Page 3 / 3
Care & Maintenance
For residential use only. Only use on a at, level surface. Do not stand on the storage bench.
Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft, dry cloth. Do not use harsh chemicals or abrasive materials or a pressure washer to clean.
COVER: When not in use, cover furniture with a breathable cover to help protect it from the harmful e󰀨ects
of sunlight, inclement weather, dust build-up, and collecting debris.
: Protect this item from inclement weather, especially ice and snow. Move to
a cool, dry indoor location. Covering while in storage is recommended to help prevent dust build-up.
:If left untreated, the wood may weather. A suitable wood stain or oil may need to be
applied yearly.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE USE OF CHEMICAL TREATMENTS OR PROTECTIVE COATINGS.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

STEP 5
F: 2
88891
STEP 6
A: 1
I: 4
• Place 2x Bottom Panel (F) inside the storage box, as
shown.
• Affix Backrest (A) to the arms using 4x M6x40 Bolt (I),
as shown.
Tighten all bolts after this step is complete.Do not fully tighten any bolts until after Step 6 is complete.

07/2020