Sunnydaze Decor QX-SLRB User manual

LOG RACK BRACKET KIT
QX-SLRB

Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
ABracket 2
BM4x25mm Screw 24
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children and pets
away during assembly.
WARNING
SLRB 02/2022
(not included)
2x4 Lumber
Power Drill with
Phillips Drill Bit
Safety Glasses
WARNING:Manufacturer and seller expressly disclaim any and all liability from personal injury,
property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment,

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
NOTE: Lumber (not included) is
nominal size and may need to be planed
or sanded to t inside the bracket slots.

Page 2 / 2
ASSEMBLY
SLRB
STEP 1
A: 2
B: 8
STEP 2
B: 16
HELPFUL HINTS
Lumber required (not included): two equal pieces for the length of the rack, four pieces for the height of the rack.
NOTE: Additional brackets or bracing (not included) may be required for vertical lumber that is taller than 4 feet.
Lumber is nominal size and may need to be planed or sanded to t inside the bracket slots.
Do not use lumber that is cracking or checking (splits in the length of the wood).
02/2022
Review all information and understand assembly before beginning.
TIPS:
Drive screws at a low speed.
Ensure screws are installed straight.
If the screws are not penetrating
your lumber, drill a pilot hole.
IMPORTANT: Ensure all screws are
securely fastened before use.
Periodically check and tighten screws
as necessary.
Lumber not included.Lumber not included.
• Periodically check and tighten screws as necessary.
• Vertical lumber supports that exceed 4 feet in height should be reinforced with additional braces. Lumber and
additional braces not included.
• Always use extreme caution when using power tools.
SAFETY STATEMENTS & WARNINGS

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
