SUNPAN 106343 User manual

Sunpan item No : 106343
Sunpan Product Name: TERRY BISTRO TABLE-SQUARE-30"
No DESCRIPTION Qty ILLUSTRATION
A
TERRY BISTRO TABLE - GLASS 1
B TERRY BISTRO TABLE - TOP FRAME 1
C TERRY BISTRO TABLE - MIDDLE FRAME 1
D TERRY BISTRO TABLE -LEG 1
E TERRY BISTRO TABLE - BASE 1
F CSK ALLEN SCREW 8
G CSK ALLEN SCREW 10
H ALLEN KEY 1
I ALLEN KEY 1
PARTS LIST
Before you begin, please layout all parts and ensure you have the correct count
ASSEMBLY INSTRUCTION
Please visit our website www.sunpan.com for more great products .
For assembly questions please call 1-800-787-1019 (or [phone]) outside North America
or email to [e-mail]

STEP DESCRIPTION
1
PLACE THE MIDDLE FRAME (C) ON THE LEG (D) AND ALIGN
THE OPENINGS.
2
FIX THE MIDDLE FRAME BY TIGHTENING THE SCREW (F)
WITH THE HELP OF ALLEN KEY (H).
3
FIX THE LEG (D) WITH BASE (E) BY TIGHTENING THE SCREW
(F) WITH ALLEN KEY (I).
4
PLACE THE TOP FRAME (B) ON MIDDLE FRAME (C) AND
ALIGN THE OPENINGS. FIX THE TOP FRAME BY TIGHTENING
THE SCREW (G) WITH ALLEN KEY (H).
ASSEMBLY INSTRUCTIONS
ILLUSTRATION
(D)
(C)
(F)
(H)
(D)
(E)
(F)
(I)
(H) (G)
(C)
(B)

STEP DESCRIPTION
5
PLACE THE GLASS (A) ON THE TOP FRAME.
6
ASSEMBLY COMPLETED.
ASSEMBLY TIPS:
THERE IS RISK OF TIGHTENING THE SCREWS TOO MUCH AND DAMAGING THE TOP IF A DRILL IS USED
-please checks parts and hardware before assembling. Follow each instruction step by step.
-place a protective pad or piece of cardboard on the floor while assembling your item on top of it.
-remove all parts from the carton and separate them into part numbers/groups as indicated on the part list.
WARNING:
FURNITURE CARE:
Following these few basis steps will help to ensure that you enjoy your furniture for a long time:
ILLUSTRATION
-place a piece of felt or a pad under the legs of your furniture to avoid scratching the floor.
-don't attempt to repair or modify parts that are broken or defective - if you find a broken part please contact.
-the retailer where you purchased it for replacement.
-keep all hardware parts out of the reach of children.
-please follow instructions in the sequence as numbered to assure fast/easy assembly.
-excessive exposure to sunlight may cause fading.
-excessive temperature and humidity or cold may cause cracking or splitting.
-do not expose your furniture to direct sunlight, dampness or any heat,like a hot cup of coffee or tea. Always use a coaster.
-dust with a clean, damp, lint free cloth.
-use a damp cloth with water or mild detergent to clean all surfaces.
- do not use chemicals or paint thinner which will fade the surface.
(A)