SUNPAN 107107 User manual

ASSEMBLY INSTRUCTION
NO. DESCRIPTION QUANTITY ILLUSTRATION
AHeadboard 1
BFootboard 1
CSide rails 2
DMiddle Legs 4
ECenter Rail 2
Sunpan Item No: 107107
Sunpan Product Name: CORDOBA BED - KING - PEARL RIVER GREY
Please visit our website www.sunpan.com for more great products.
For assembly questions please call 1-800-787-1019 (or [phone]) outside North America or email to [e-mail]
PARTS LIST
Before you begin, please layout all parts and ensure you have the correct count.
1/2
FSlats 14
GBolts ( Ø6*15mm) 12
HBolts ( Ø8*50mm) 4
I
J
Allen Key K4
Allen Key K5
1
1

STEP DESCRIPTION
1
2
ASSEMBLY TIPS:
Please checks parts and hardware before assembling. Follow each instruction step by step.
Place a protective pad or piece of cardboard on the oor while assembling your item on top of it.
Remove all parts from the carton and separate them into part numbers/groups as indicated on the part list.
Please follow instructions in the sequence as numbered to assure fast/easy assembly.
WARNING:
Don't attempt to repair or modify parts that are broken or defective - if you nd a broken part please contact us for replacement.
Keep all hardware parts out of the reach of children.
FURNITURE CARE:
Following these few basis steps will help to ensure that you enjoy your furniture for a long time:
Do not expose your furniture to direct sunlight, dampness or any heat, like a hot cup of coffee or tea. Always use a coaster.
Excessive exposure to sunlight may cause fading.
Excessive temperature and humidity or cold may cause cracking or splitting.
Dust with a clean, damp, lint free cloth.
Use a damp cloth with water or mild detergent to clean all surfaces - do not use chemicals or paint thinner which will fade
the surface.
Place a piece of felt or a pad under the legs of your furniture to avoid scratching the oor.
ILLUSTRATION
ASSEMBLY INSTRUCTIONS
2/2
G
J
I
H
3Rails (C).
Assemble the Side Rails
(C) into both Headboard
(A) and Footboard (B)
using the Allen Key (J) to
tighten Bolts (G)
Insert Middle Legs (D) into
cleat on the Center Rail (E)
using the Allen Key (I) to
tighten Bolts (H).
Assemble Slats (F) to Side
Assembly completed.