SUNPAN PASADENA FLOOR MIRROR-BRASS User manual

ASSEMBLY INSTRUCTION
Sunpan Item No: 106552
Sunpan Product Name: PASADENA FLOOR MIRROR - BRASS
Please visit our website www.sunpan.com for more great products
PARTS DESCRIPTION QUANTITY ILLUSTRATION
A Mini Ez Anchor 4 pcs.
B Mini Ez Screws 4 pcs.
C Toggle Screw 2 pcs.
D Toggle Anchor 2 pcs.
E Wall Bracket 1pcs.
For assembly questions please call 1-800-787-1019 (or [phone]) outside North America or email to [e-mail]
PARTS LIST
Before you begin, please layout all parts and ensure you have the correct count.
1/3

STEPS INSTRUCTION
1
Place the wall bracket (E)
on the desired location,
and mark the hole
openings on the wall with
a pencil. Confirm precise
distance and levelness
between holes for
accurate hanging.
2
It is imperative that the
mirror is mounted into a
wall stud. Drill small pilot
holes into the wall at the
marked locations, and
insert wall anchors (A) &
(D) until flush with the
wall. Do not insert wall
anchors into studs.
3
Place the wall bracket (E)
over wall anchor and
screw wall screws (B) &
(C) through the wall
bracket and into anchors.
ILLUSTRATION
ASSEMBLY INSTRUCTIONS
E
D
A
C
B
2/3

4
To mount mirror, slide
back panel bracket on
the mirror onto the wall
bracket (E) .
5Installation is complete.
ASSEMBLY TIPS:
Please check parts and hardware before assembling. Follow each instruction step by step.
Place a protective pad or piece of cardboard on the floor while assembling your item on top of it.
Remove all parts from the carton and separate them into part numbers/groups as indicated on the part list.
Please follow instructions in the sequence as numbered to assure fast/easy assembly.
WARNING:
Professional installation is strongly recommended.
For your safety, it is recommended that two people hang the fixture.
Check with a professional to ensure your wall can tolerate the product weight.
It is imperative that the mirror is mounted into a wall stud
Don't attempt to repair or modify parts that are broken or defective - if you find a broken part please contact us for replacement.
Keep all hardware parts out of the reach of children.
FURNITURE CARE:
Following these few basic steps will help to ensure that you enjoy your furniture for a long time:
Excessive exposure to sunlight may cause fading.
Excessive temperature and humidity or cold may cause cracking or splitting.
Dust with a clean, damp, lint free cloth.
Use a damp cloth with water or mild detergent to clean all surfaces - do not use chemicals or paint thinner which will fade the surface.
E
3/3