SUNPAN Quinn 100766 Mounting instructions

ASSEMBLY INSTRUCTION SHEET
Description : Quinn Office Chair
Item No: 100766
Please visit our web-site wvwv.sunpan.com for more great products .
For assembly questions please call 1-800-787-1019 (or [phone])outside North America
or email to [email protected]
ffi
SUNPAN
MSnHRf*l HOMf
sunpan.com
,il W;,, ffiffi,.ffi
ACHAIR BACK 1r}
\-. *-'
BSEAT 1k5
GAS LIFT 'l l:k
DSEAT BASE 1utlw*
EFIVE STAR BASE 10,"'''bt.u
-{\
FJ-BAR 1;i.t
GBOLT ( M6x20mm) 4-'$#'*
HBOLT ( f'/$x'l$mn) 4*,,rtillii'
'tty
$Qlf (lvl$x1$mm) 4-@
JALLEN WRENCH (M6) Iffi'*
KALLEN WRENCH (Ms) Irra ii:
8J -_

ASSEMBLY TIPS:
-Please check parts and hardware before assembling. Follow each instruction step by step.
-Place a protective pad or piece of cardboard on the floor while assembling your item on top of it.
-Remove all parts from the carton and separate them into part numbers/groups as indicated on the part list.
-Please Follow instructions in the sequence as numbered to assure fasVeasy assembly.
WARNING:
-Don't attempt to repair or modiff parts that are broken or defective . if you find a broken part please contact the retailer where
you purchased it for replacement.
-Keep all hardware parts out of the reach of children.
FURNITURE CARE:
Following these few basic steps will help to ensure that you enjoy your furniture for a long time:
-Do not expose your furniture to direct sunlight, dampness or any heat,such as a hot cup of coffee or tea. Always use a coaster.
-Excessive exposure to sunlight may cause fading
-Excessive temperature and humidity or cold may cause cracking or splitting
-Dust with a clean, damp, lint free cloth
-Use a damp cloth with water or mild detergent to clean all surfaces . Do not use chemicals or paint thinner which will fade
the surface.
-Place a piece of felt or a pad under the legs of your furniture to avoid scratching the floor.