SUNPAN KELDON User manual

ASSEMBLY INSTRUCTION
Sunpan Product Name: KELDON BED - KING - BELFAST HEATHER GREY
Please visit our website www.sunpan.com for more great products.
For assembly questions please call 1-800-787-1019 (or [phone]) outside North America or email to [email protected]
AHeadboard 1
B Footboard 1
CSide Rails 2
D
E
Center Rail 1
F
Slats 14
GL Brackets 2
H
Bolts ( M6x20)
I
Allen Key K5 1
4
PARTS LIST
Before you begin, please layout all parts and ensure you have the correct count.
ILLUSTRATION
QUANTITY
DESCRIPTIONPARTS
Bolts ( M6x12) 8
1/3

JLock washers (M6x11) 4
KWashers (M6x19) 4
L
M
Allen Key K4 1
Screws (m4x30) 2
ASSEMBLY INSTRUCTIONS
STEP DESCRIPTION ILLUSTRATION
1
2
3
F
H
1a: Attach Side Rail (C) to
Headboard (A) and Footboard
(B) by using Bolt (F) (M6x12) with
Allen key K5 (H).
1b: Attach Side Rail (C) to
Footboard (B) with L Brackets (G)
by using Bolt (I) (M6x20), Lock
Washers (J), Washers (K) and Allen
key K4 (L). L
K J I
Insert Center Rail (D) to
Headboard (A) and Footboard
(B).
Assemble Slats (E) to Side Rail
(C) by using Screw (M).
Assembly completed.
2/3
M

3/3
Don't attempt to repair or modify parts that are broken or defective - if you find a broken part please contact us for replacement.
ASSEMBLY TIPS:
Please checks parts and hardware before assembling. Follow each instruction step by step.
Place a protective pad or piece of cardboard on the floor while assembling your item on top of it.
Remove all parts from the carton and separate them into part numbers/groups as indicated on the part list.
Please follow instructions in the sequence as numbered to assure fast/easy assembly.
WARNING:
Keep all hardware parts out of the reach of children.
FURNITURE CARE:
Following these few basicsteps will help to ensure that you enjoy your furniture for a long time:
Do not expose your furniture to direct sunlight, dampness or any heat, like a hot cup of coffee or tea. Always use a coaster.
Excessive exposure to sunlight may cause fading.
Excessive temperature and humidity or cold may cause cracking or splitting.
Dust with a clean, damp, lint free cloth.
Use a damp cloth with water or mild detergent to clean all surfaces - do not use chemicals or paint thinner which will fade
the surface.
Place a piece of felt or a pad under the legs of your furniture to avoid scratching the floor.