SUNPAN GREYSON User manual

qty
description
code
Hardware Check List
1.
- PLEASE DO NOT DISCARD ANY OF THE PACKAGING UNTIL YOU
HAVE CHECKED ALL THE PARTS AND THE PACKS OF HARDWARE.
- BEFORE YOU BEGIN TO ASSEMBLE YOUR NEW PIECE OF
FURNITURE, PLEASE CHECK TO ENSURE THAT ALL PARTS HAVE
BEEN SUPPLIED.
- FOLLOW INSTRUCTIONS CLOSELY AS DEVIATION FROM THEM
MAY VOID YOUR WARRANTY AND PRESENT A POSSIBLE SAFETY
RISK.
- IT IS RECOMMENDED THAT ASSEMBLY IS DONE ON A SOFT
SURFACE LIKE CARPET TO AVOID ANY DAMAGE.
- PERIODICALLY CHECK AND RE-TIGHTEN ANY FASTENERS. WIPE
DOWN ALL SURFACES WEEKLY WITH A CLEAN CLOTH. DO NOT
CLEAN ANY SURFACES WITH HARSH ABRASIVES OR CHEMICALS.
2.
AQtyComponents
Code
Parts Check List
B
x01
BODYA
METAL LEG x02
ASSEMBLY INSTRUCTIONS
GREYSON DRESSER
100%
01 Bolt x08
02 Spring washer x08
03 Flat washer x08
04 allen key x01
01
02
03

Young children may be injured by tipping furniture and the use
of a tipping restraint is highly recommended.
When properly installed, this restraint could provide protection
against the unexpected tipping of furniture due to small tremors,
bumps or climbing. We recommend mounting this restraint to a
wall stud.
WARNING: This product is only a deterrent. It is not a
substitute for proper adult supervision.
InstallationInstruction:
1. Attach one of the mounting brackets securely near the top back edge of the furniture piece by inserting the
screw. Refer to picture A.
2. Determine the final position of the furniture piece. Mark location on the wall approximately 2” below the
bracket mounted to the back of the furniture.
3. Drill a starter hole into the wall stud. If wall stud is not available, drill a hole into the wall and insert plastic
anchor. Gently tap anchor until the flange of the anchor is flush with the wall.
4. Attach the second bracket by inserting and securing the screw to the wall. Refer to picture B.
5. Align the two brackets.
6. Thread the strap through both brackets and tighten until snug.
7. Check to make sure that the brackets are firmly installed the strap is secure.
TIPPING KIT CHECK LIST
CODE COMPONENT QTY
01 PLASTIC STRAP 2
02 SCREW 4
03 NYLON WALL PLUG 2
04 METAL BRACKET 4
FURNITURE TIPPING RESTRAINT FOR
GREYSON DRESSER
AB
THE WALL BACK SIDE
04
02
03
01