Super Circuits PC177IR-8 User manual

Weatherproof IR Color
Day/Night Cameras
Products: PC177IR-8, PC177IR-9, PC177IR-10,
PC177IRHR-8, PC177IRHR-9,
PC177IRHR-10
Please read this manual before installing and using this camera and always follow
instructions for proper use. Please le this manual away for future reference.
PC177IR_CM
PC177IR_CM.indd 1 2/25/2010 10:32:09 AM

ii www.supercircuits.com
LEGAL NOTICE
Supercircuits’ products are designed to meet safety and performance
standards with the use of specic Supercircuits authorized accessories.
Supercircuits disclaims liability associated with the use of non-
Supercircuits authorized accessories.
The recording, transmission, or broadcast of any person’s voice without
their consent or a court order is strictly prohibited by law.
Supercircuits makes no representations concerning the legality
of certain product applications such as the making, transmission,
or recording of video and/or audio signals of others without their
knowledge and/or consent. We encourage you to check and comply
with all applicable local, state, and federal laws and regulations before
engaging in any form of surveillance or any transmission of radio
frequencies.
Other trademarks and trade names may be used in this document
to refer to either the entities claiming the marks and names or their
products. Supercircuits, Inc. disclaims any proprietary interest in
trademarks and trade names other than its own.
No part of this document may be reproduced or distributed in any form or
by any means without the express written permission of Supercircuits, Inc.
© 2010 Supercircuits, Inc. All rights reserved.
Supercircuits, Inc.,
11000 N. Mopac Expressway, Building 300, Austin, TX 78759
Sales/Support: 1.800.335.9777 | Fax: [phone]
WARNING
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To reduce the risk of electric shock, do not
remove cover (or back). No user serviceable
parts inside. Refer servicing to qualied
service personnel.
PC177IR_CM.indd 2 2/25/2010 10:32:09 AM

iii
Weatherproof IR Color Day/Night Cameras
WARNINGS & CAUTIONS
WARNING
!Do not use the camera if fumes, smoke or a strange
odor is emitted from the unit, or if it seems to not
function correctly. Disconnect the power source
immediately and consult your supplier.
WARNING
!
Do not adjust or modify the camera’s internal circuits
or power supply modules. No user serviceable parts
exist inside. For internal settings and repairs, consult
your supplier.
CAUTION

Always follow the instructions in the installation guide
when applying power. Fire and equipment damage can
occur if power is applied incorrectly.
CAUTION
To prevent damage do not drop the camera
or subject it to strong shock or vibration.
CAUTION
Never point the camera toward the sun. Use caution
when operating the camera in the vicinity of spot lights
or other bright lights and light reecting objects.
PC177IR_CM.indd 3 2/25/2010 10:32:10 AM

iv www.supercircuits.com
WARNINGS & CAUTIONS
CAUTION

Do not install the camera or route video cables near a
TV, radio transmitter, magnet, electric motor transformer
or audio speakers. The magnetic elds generated by
these devices may interfere with or distort the image.
CAUTION
Only use the camera in areas where the
temperature and humidity are within the
recommended specications.
PC177IR_CM.indd 4 2/25/2010 10:32:11 AM

1
Weatherproof IR Color Day/Night Cameras
TABLE OF CONTENTS
Table of Contents
SECTION 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1 Camera components . . . . . . . . . . . . . . . . . 2
1.2 Camera connections . . . . . . . . . . . . . . . . . 3
SECTION 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 What’s in the box . . . . . . . . . . . . . . . . . . . . 4
2.2 What you need. . . . . . . . . . . . . . . . . . . . . . 4
2.3 Installing the camera . . . . . . . . . . . . . . . . . 5
SECTION 3 Aiming the Camera. . . . . . . . . . . . . . . . . . . . . . 7
SECTION 4 Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SECTION 5 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 1. Specifications for PC177IR-8,
PC177IR-9, PC177IR-10 . . . . . . . . . . . . . . . . . 9
Table 2. Specifications PC177IRHR-8,
PC177IRHR-9, PC177IRHR-10 . . . . . . . . . . . 10
SECTION 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 11
PC177IR_CM.indd 1 2/25/2010 10:32:11 AM

2www.supercircuits.com
SECTION 1
Features
The PC177IR series weatherproof, IR color day/night cameras are highly
durable and easy to install. These cameras include:
• Advanced image sensors for greater picture clarity
• Ability to see in the dark with a built-in IR array
• Built-in auto IR on/off control
• Precision lenses for added clarity
• IP66-rated weatherproof case
1.1 Camera components
Video
75 Ohm
12 V DC
SECTION 1: FEATURES
Sunshield
Lens
IR LED Array
Bracket
Mounting Point
PC177IR_CM.indd 2 2/25/2010 10:32:11 AM

3
Weatherproof IR Color Day/Night Cameras
SECTION 1: FEATURES
1.2 Camera connections
Single camera system with monitor
Multiple camera system with DVR and monitor
Connect
Connect
PC177IR_CM.indd 3 2/25/2010 10:32:12 AM

4www.supercircuits.com
SECTION 2: INSTALLATION
SECTION 2
Installation
2.1 What’s in the box
The camera package contains:
• Camera assembly
• Bracket screws
• Instruction manual
2.2 What you need
To install the camera, you will need:
• #2 Phillips screwdriver
• Hardware to attach the mounting bracket to the mounting surface
• Mounting bracket
PC177IR_CM.indd 4 2/25/2010 10:32:12 AM

5
Weatherproof IR Color Day/Night Cameras
SECTION 2: INSTALLATION
2.3 Installing the camera
This procedure steps through the installation of a PC177IR camera
using the Supercircuits MB22 mounting bracket (sold separately). If you
are using a different mounting bracket, this procedure can serve as a
general guideline for installing your equipment.
1. Using the bracket mounting plate as a template, mark the location
of the holes for the mounting screws on the mounting surface.
Bracket as guide
2. Drill mounting screw holes into the mounting surface.
3. Mount the camera to the bracket.
Mounting
holes
Mounting
holes
Mounting
holes
PC177IR_CM.indd 5 2/25/2010 10:32:12 AM

6www.supercircuits.com
SECTION 2: INSTALLATION
Camera to bracket
4. Attach the mounting bracket to the mounting surface with the
included hardware.
Cable attachment
5. Attach the BNC cable to the camera drop cable as required.
NOTE Connectors on the video/power cable are different at each end!
NOTE Connections are not weatherproof.
Connect
To DVR/Monitor
and Power
To DVR/Monitor
and Power
PC177IR_CM.indd 6 2/25/2010 10:32:13 AM

7
Weatherproof IR Color Day/Night Cameras
SECTION 3: AIMING THE CAMERA
SECTION 3
Aiming the Camera
1. Connect the video cable from the camera to a test monitor or to a
video input on the DVR.
2. Connect the DC12V adapter to the camera.
3. Loosen the pan and tilt set screws on the camera mounting
bracket until the camera direction can adjusted. Do not remove the
set screws.
Camera aiming
4. While observing the video from the camera, aim the camera at
your target area.
5. Tighten the set screws to lock the camera in place.
PC177IR_CM.indd 7 2/25/2010 10:32:13 AM

8www.supercircuits.com
SECTION 4: CLEANING
SECTION 4
Cleaning
Clean the camera lens and IR lamp shield with an approved glass
cleaning solution and a lint free cloth.
• Remove all foreign particles, such as plastic or rubber materials,
attached to the camera housing. These may cause damage to the
surface over time.
• Dust can be removed from the unit by wiping it with a soft damp
cloth. To remove stains, gently rub the surface with a soft cloth
moistened with a mild detergent solution, then rinse and dry it with
a soft cloth.
CAUTION

Do not use benzene, thinner or other chemical products
on the camera assembly; these may dissolve the paint
and promote damage of the surfaces. Before using any
chemical product, read the accompanying instructions
carefully.
PC177IR_CM.indd 8 2/25/2010 10:32:13 AM

9
Weatherproof IR Color Day/Night Cameras
SECTION 5: SPECIFICATIONS
Model PC177IR-8 PC177IR-9 PC177IR-10
Image Sensor 1/4" Sharp CCD
TV system NTSC
CCD total pixels 510(H) × 492 (V)
Scanning system 525 lines, 60 elds/sec
SYNC system Internal
Horizontal resolution 420 TV lines
Minimum illumination 0 Lux / F2.0 (LED on)
Lens 3.6 mm / F2.0 6 mm / F2.0 6 mm / F2.0
IR LED lamps 24 PCS 48 PCS 60 PCS
IR view distance 65 ft (20 m) 130 ft (40 m) 164 ft (50 m)
Infrared status < 10 Lux by CDS auto control
B.L.C. control Auto
White balance Auto
Gain control Auto
Electronic shutter 1/60 ~ 1/100,000 sec
S/N ratio ≥48dB (AGC off)
Gamma correction 0.45
Video output 1.0 Vp-p @ 75 Ω
Operation temperature 14°F ~ 122°F (-10°C ~ 50°C)
Operation Humidity < 95% RH
Power supply 12 V DC @ 250 mA 12 V DC @ 500mA 12 V DC @ 600 mA
Dimensions 2.21 × 2.44 × 7.08 in
(56 × 62 × 180 mm)
3.27 × 4.88 × 6.89 in
(83 × 124 × 175 mm)
3.74 × 6.85 × 6.89 in
(95 × 174 × 175 mm)
Weight Approx. 1.43 lbs
(650 g)
Approx. 1.98 lbs
(900 g)
Approx. 2.43 lbs
(1100 g)
PC177IR_CM.indd 9 2/25/2010 10:32:14 AM

10 www.supercircuits.com
SECTION 5: SPECIFICATIONS
Model PC177IRHR-8 PC177IRHR-9 PC177IRHR-10
Image Sensor 1/3" Sony CCD
TV system NTSC
CCD total pixels 811 (H) × 508 (V)
Scanning system 525 lines, 60 elds/sec
SYNC system Internal
Horizontal resolution 540 TV lines
Minimum illumination 0 Lux / F2.0 (LED on)
Lens 3.6 mm / F2.0 6 mm / F2.0 6 mm / F2.0
IR LED lamps 24 PCS 48 PCS 60 PCS
IR view distance 65 ft (20 m) 130 ft (40 m) 164 ft (50m)
Infrared status < 10 Lux by CDS auto control
B.L.C. control Auto
White balance Auto
Gain control Auto
Electronic shutter 1/60 ~ 1/100,000 sec
S/N ratio ≥48dB (AGC off)
Gamma correction 0.45
Video output 1.0 Vp-p @ 75 Ω
Operation temperature 14°F ~ 122°F (-10°C ~ 50°C)
Operation Humidity < 95% RH
Power supply 12V DC @ 250mA 12V DC @ 500mA 12V DC @ 600 mA
Dimensions 2.21 × 2.44 × 7.08 in
(56 × 62 × 180 mm)
3.27 × 4.88 × 6.89 in
(83 × 124 × 175 mm)
3.74 × 6.85 × 6.89 in
(95 × 174 × 175 mm)
Weight Approx. 1.43 lbs
(650 g)
Approx. 1.98 lbs
(900 g)
Approx. 2.43 lbs
(1100 g)
PC177IR_CM.indd 10 2/25/2010 10:32:14 AM

11
Weatherproof IR Color Day/Night Cameras
SECTION 6: TROUBLESHOOTING
SECTION 6
Troubleshooting
Before sending the camera for repair, please follow the suggestions
listed below and make sure that the camera is installed correctly. If it
still does not perform adequately, please consult your supplier or contact
Supercircuits directly at 1.800.335.9777.
1. No picture on the monitor screen.
a. Check that all connected devices are powered on.
b. Conrm that the voltage is correct.
c. Conrm that the power supply provides enough current
to power the camera.
d. Check that all video cables are correctly connected.
2. The picture is not clear.
a. Check that your monitor is correctly adjusted.
b. Conrm that the glass in front of the lens is clean.
If there is dust, dirt or ngerprints on the glass, the image
quality will be affected. To clean the glass use a soft, dry
and non-abrasive cloth or a commercially available lens
cleaning set.
PC177IR_CM.indd 11 2/25/2010 10:32:14 AM

12 www.supercircuits.com
SECTION 6: TROUBLESHOOTING
3. The picture has interference.
a. The camera may be close to a high voltage source,
such as a power generator.
b. The BNC cable is not terminated properly.
c. The video cables are not connected properly.
4. The camera doesn’t operate at night.
a. Your cable run may be too long and you are experiencing a
drop in voltage.
Visit www.supercircuits.com/resources/tools/voltagedrop to
calculate your voltage drop.
CAUTION

This camera is a precision instrument and when
treated with care, will provide years of satisfactory
performance. If a problem does occur, do not open the
camera to make repairs. Servicing should always be
referred to your supplier.
PC177IR_CM.indd 12 2/25/2010 10:32:14 AM