Super Circuits CD25IP User manual

Camera unit User manual Wrenches
1 2 3 4 5
Wall anchors plastic
sheath X3 Wall anchors X3
O-ring X3
6 7 8
Sponge rubber Plugs
3-Axis Bracket
Support can rotate separately in the XYZ axes Vandal-proof design.
Auto ICR
For lowlight conditions automatically switches IR Cut Filter on/off.
DC 12V/48V
CD25IP

1/3” SONY CCD Sensor
NTSC: 768(H)*494(V) / PAL: 752(H)*582(V)
3.5~9.5mm V.F. lens MOR
540 TV lines
2:1 interlace
0.1 Lux/ F1.2
Internal
More than 48dB
0.45
Auto and up 1/100,000
1 Vp-p output, 75 Ohm Composite
DC 12V / DC 48V
MCT-AWB Technology (Multi-color Temp.)
Full Auto
2H Mode of H.V aperture correction
910g
-30° ~ +60° C
-10° ~ +45° C
CD25IP
Full Auto
ON(Outdoor) / OFF(Indoor)
165mm* 120mm
230mA ±10% under DC 12V
PS.The explanation of the switch on the board
ON
1
Outdoor use AES ON
Indoor use AES OFF
Connect the cable to
the camera power
connector.
Position the Junction
box to the right place
and screw half into
3 big hole.
Find the 2 red dots,
one in ;
another one on the
Junction box.
Position the camera
box into the fillister.
Revolve the Junction
box to the smaller
side and screw in
tightly.
Turn the camera base
to the diretion you want
to project and fix the
plate by nickel screw.
Find the indentation
inside the dome cover
and position the red
bulge in camera base.
Screw tightly to
complete the
installation.
Internal View
ON
1
Adust the zoom and
focus.