Supereyes Qbot 3.0 Robot Car Kit User manual

1
Qbot 3.0 Robot Car Kit
User Manual

2
Warming tips
1. If the car is running slower, it means that the battery is already run out, and please
charge it as soon as possible. You can play it for 2 hours after charging it for one
hour
2. The indicator light will become red when the charging doesn’t finish, and when
charing complete, the indicator light turns to the green.
3. The ultrasonic sensor must be installed in the right position. Incorrect installation
can cause damage to the ultrasonic sensor.
4. When using the infrared remote control, you should make sure that no obstacle will
disturb the receiver and transmitter
5. Please don’t let any magnetic material close to the electronic component.
6. The product contains some small components; please make sure the young children
won’t eat it accidentally.
7. Please use the included charger to charge the battery, otherwise, it may cause a fire
or other accident.
8. If you do not use the car for a long time, please make sure that the control panel has
turned off, and take the battery out of the slot to avoid the unnecessary trouble.
9. About mobile phone control
1) If you are an Android user, please download the QBot.apk file in the folder to
your phone. Android version requires 4.3 or later.
2) If you are iPhone user, please search "Qbot" or search "LewanSoul" in the
iPhone App Store, and you download the app to your phone
3) Tips: Please use app own Bluetooth module to connect to the Qbot and don’t use
your phone own Bluetooth module.

3
Catalog
1 Introduction..............................................................................................1
1.1 Product introduction....................................................................... 1
1.2 Product Features..............................................................................1
2 Main assembly...................................................................................... 2
2.1 Product list.......................................................................................2
2.2 Product parameters.........................................................................3
2.3 Components.....................................................................................4
3 Installation and Operation................................................................... 5
3.1 Overview..........................................................................................5
3.2 Mobile phone APP...........................................................................5
3.2.1 Mobile phone APP Download................................................ 5
3.3 Infrared remote controller............................................................ 12
3.4 WeMake Software......................................................................... 13
3.4.1 What’s WeMake Software....................................................13
3.4.2 How to install WeMake on your computer..........................13
4FAQ...........................................................................................................20
5 The Historical version of the user manual.........................................22

1
1 Introduction
1.1 Product introduction
Qbot is an educational robot based on graphical programming and Arduino
platform. This robot is perfect for learning STEAM and robotic knowledge and suit
for robot lovers and beginners to learn robot and programming. Besides, It has more
than ten sensor modules. The whole assembly process of Qbot only takes 2 minutes.
The holes in the robot can be compatible with the LEGO building block, and it means
that you can create various gameplays. I hope you can enjoy it.
1.2 Product Features
1. Quick assembly. The whole assembly process of Qbot only takes 2 minutes.
2. The programmable robot can let you learn how to program while playing the robot.
(Mobile APP+ Infrared sensor, Mobile phone APP and infrared remote controller,
which can control Qbot to move forward, backward, turn left and turn right)
3. It can be controlled by mobile phone. You can play it whenever you like
4. Graphic programming command blocks can let children have a basic understanding
of the programming. We have developed WeMake programming software, which is
base on Scratch3.0.
5. Mobile APP controller has many different functions (joystick mode/gravity
mode/line drawing mode)
6. Use Scratch to program Arduino.
7.Various learning courses and gameplay: We provide users with Qbot gameplay, and
each of them has a very detailed video tutorial.

2
2 Main assembly
2.1 Product list
Bottom board
1
Upper board
1
Ultrasonic sensor
1
Lithium battery
1
Infrared remote controller
1
Screwdriver
1
Screw and copper pillar kit
1
USB cable
1

3
2.2 Product parameters
Programming software
WeMake(based on Scrach3.0)Windows
Arduino IDE Support
Input
Obstacle avoidance sensor, Line
follower, Ultrasonic sensor, Infrared
receiver
Output
Buzzer, RGB lights, two motor ports,
Microprocessor
Arduino UNO
Power supply
3.7V DC Lithium battery
Offline mode
Bluetooth module, Arduino App
control, iOS App control, Infrared
remote control
Diameter
85mm
Net Weight
140g

4
2.3 Components
Name of Component
Picture
Quantity
Upper Board
1
Bottom Board
1
Ultrasonic Sensor
1
Infrared Remote
Controller
1
Copper Pillars and
Screws
Several
Lithium Battery
1
Connecting Wire
1

5
3 Installation and Operation
3.1 Overview
1. Different functions require different program file；
2. The default program in Qbot is a mobile phone app and an infrared remote
controller program so that you can use your cell phone and infrared remote controller
to control the Qbot directly. It should only have one program file in the Qbot at the
same time. If you upload other files (such as Gesture control program file) to Qbot,
the mobile phone APP and the infrared remote controller will be removed；
3. If you want to control the Qbot through using the Bluetooth module or infrared
remote controller, the programs that we need to download are the same. You can refer
to the link or QR code below.
4. Different components of Qbot have different functions. You can create different
gameplay
5. When your phone fails to connect to Qbot, please check out whether the Bluetooth
program file has already downloaded or not.
Here are the link and QR code.
Types
Learning video
Link
http://bit.ly/2sg2YYQ
QR code
3.2 Mobile phone APP
3.2.1 Mobile phone APP Download
Types
Android System
Link
http://bit.ly/2RzHErZ
QR code
(1) You can enter the installation package and download it on your
mobile phone.
(2) If you enter the Installation package, you can find the mobile phone
App(Android Only)

6
3.2.2 Mobile phone APP to control the Qbot
(1)First, turn on Qbot
(2)Then enter Qbot APP that has been download on your mobile phone.
(3)After your phone connects to Qbot, you can start to control your Qbot.
Tips:
1. The app can connect to the Qbot automatically.
2. If you click the list icon on the right, you will see the image as shown
below:

7
If the app fails to connect to Qbot, restart the APP, and reconnect again.
(Please remember using the Bluetooth module in the mobile phone app
and do not use the one on your phone system).
If you connect to it successfully, you will see the image as below after
clicking the Qbot module:

8
Here is the introduction of each icon:
Icon
Meaning
Icon
Meaning
Turn on the Bluetooth
switch.
Change to
gravity mode.
Display the distance
between the ultrasonic
sensor and the obstacle
The light color on the
upper board will
change in each two
second
This mini bubble uses
to control the motion of
Qbot
Raise the alarm.
First, you may notice the numbers on the Ultrasonic sensor board. This
number represents the distance between the Qbot and the object in front
of it. The distance will change when Qbot moves.

9
Then, you can click the Gravity control icon, and you can control the
motion of Qbot by shaking your mobile phone. We offer two modes to
control the motion of Qbot, and the other is stick mode, which means you
can operate the Qbot through the virtual button on your phone.
After that, if you click the random light, The light color on the upper
board will change in each two second

10
If you click on the horn icon, the Qbot will raise the alarm.
If you click the “draw line” icon, you will see the image as shown below:

11
You can draw any lines you want on the app. After clicking “Play” icon,
Qbot will follow the track and move, and you can clear the line you draw
by clicking “Clear screen” icon as shown in the picture, if you draw a
graph in the gray part, the Qbot will go around the shapes that you draw.

12
Here is the function of the icon:
Clear the line you draw on the screen.
Let Qbot follow the line you have drawn.
When you press this button, you can stop the Qbot at
any time.
3.3 Infrared remote controller
Qbot package contains an infrared remote controller, and you can use it to
control the motion Qbot.
The hardware principle of infrared remote controller: Infrared light is
a light that our human eye can not see. We regard the infrared remote

13
controller as a flashlight that can emit infrared light and the infrared
receiver module as an eye that can see the infrared light.
When we press button 2 on the remote controller. Qbot will move
forward, and if we press button 8, it will move backward, and press 4 and
6 can let Qbot turn left and right respectively
3.4 WeMake Software
3.4.1 What’s WeMake Software
WeMake is our company self-developed graphical programming program
editor, which is based on Scratch 3.0. We can use this software to
program. WeMake's simple structure makes it possible for everyone to
build intelligent robots without having to learn esoteric programming
knowledge.
3.4.2 How to install WeMake on your computer
Install Wemake
Enter the installation file and select the installation path.

14
Click the “Next” button
Then click the “Install” button.
Wait for a while

15
Finally, select “Launch Website” and click “Finish” button
How to let Wemake connect to the Qbot:
We only can use Wemake to program Qbot, when Qbot has been
connected to Wemake.
How can we connect Qbot to Wemake? First, we need to connect Qbot to
the computer with the USB cable, enter Wemake software, and select the
corresponding option in Menu>connect>

16
After clicking the corresponding serial port, the serial port connection is
successful.
Different computers may have different USB ports, and you can open the
device manager, expand "Ports (COM & LPT).

17
If you cannot find the corresponding USB port in the device manager,
you need to install the driver again.
Open Wemake software,Menu>Connect>Install Driver
Open the driver installation interface