Supermicro AOC-MTGN-i2S User manual

User's Guide
Revision 1.0a
AOC-MTGN-i2S

User's Guide Revision 1.0a
Release Date: February 24, 2016
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2016 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User's Guide has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
and makes no commitment to update or to keep current the information in this user's guide, or to
notify any person or organization of the updates. Please Note: For the most up-to-date version
of this user's guide, please see our Website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this user's guide at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between the manufacturer and the customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa Clara
shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.

Preface
About this User's Guide
This user's guide is written for system integrators, IT technicians and
knowledgeable end users. It provides information for the installation and use of the
AOC-MTGN-i2S add-on card.
About this Add-on Card
The Supermicro® Super I/O Modules provide exible I/O networking options, and
the AOC-MTGN-i2S is the most exible and scalable 10GbE SFP+ SIOM controller
for today’s demanding data center environments. Based on the Intel 10GbE network
controller 82599, the AOC-MTGN-i2S addresses the demanding needs of the next
generation data center by providing unmatched features for virtualization, exibility
for LAN and SAN networking.
Please note that this product is sold only as part of an integrated solution with
Supermicro server systems.
An Important Note to the User
All images and layouts shown in this user's guide are based upon the latest PCB
Revision available at the time of publishing. The card you have received may or
may not look exactly the same as the graphics shown in this user's guide.
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required before
any warranty service will be rendered. You can obtain service by calling your ven-
dor for a Returned Merchandise Authorization (RMA) number. When returning the
motherboard to the manufacturer, the RMA number should be prominently displayed
on the outside of the shipping carton, and the shipping package is mailed prepaid
or hand-carried. Shipping and handling charges will be applied for all orders that
must be mailed when service is complete. For faster service, you can also request
a RMA authorization online (http://www.supermicro.com/RmaForm/).
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alternation, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.
Preface
iii

iv
AOC-MTGN-i2S Add-on Card User's Guide
Conventions Used in the User's Guide
Pay special attention to the following symbols for proper system installation and to
prevent damage to the system or injury to yourself:
Warning: Important information given to ensure proper system installation
or to prevent damage to the components or injury to yourself.
Note: Additional information given to differentiate between various models
or provides information for correct system setup.
Naming Convention
SMC Networking Add-on Cards
Naming Convention for SIOM Network Adapters
A O C – MH IBF – 2 Q G
1 – 2 3 – 6 7 8
Character Representation Options
1st Product Family AOC: Add On Card
2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,
M: Super IO Module (SIOM), MH: SIOM Hybrid
3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),
40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE
(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),
IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface
4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)
5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom
6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports
7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28
8th 2nd Controller/Connector Type
(Optional)
G: GbE RJ45, S: 10G SFP+, T: 10GBase-T
Model Type Form Factor Controller Connection Dimension
(w/o Brackets) (L x H)
Power
(W)
SGP-i2 GbE Standard LP Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 3.5
SGP-i4 GbE Standard LP Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 5
STG-b4S 10GbE Standard LP Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (137mm) x 2.73” (69mm) 14
STG-i2T 10GbE Standard LP Intel® X540-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x 2.73” (69mm) 13
STGN-i2S 10GbE Standard LP Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 11.2
STGN-i1S 10GbE Standard LP Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 10
STG-i4S 10GbE Standard LP Intel® XL710-AM1 4 SFP+ (10Gb/port) 5.9” (150mm) x 2.73” (69mm) 8
S40G-i2Q 40GbE Standard LP Intel® XL710 AM2 2 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 7
PTG-i1S 10GbE Proprietary Intel® 82599EN 1 SFP+ (10Gb/port) 10.04” (255mm) x .78” (20mm) 7.5
UG-i4 GbE UIO FH Intel® 82571EB 4 RJ45 (1Gb/port) 6.6” (167mm) x 3.9” (98mm) 10
CGP-i2 GbE MicroLP Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.54” (39mm) 4
CG-i2 GbE MicroLP Intel® 82580 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.3” (34mm) 4
CIBF-m1 FDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (56Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CIBQ-m1 QDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (40Gb/port) 4.85" (123mm) x 1.54" (39mm) 7
CTG-i1S 10GbE MicroLP Intel® 82599EN 1 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 10
CTG-i2S 10GbE MicroLP Intel® 82599ES 2 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 11
CTG-i2T 10GbE MicroLP Intel® X540 2 RJ45 (10GBase-T) 4.8” (123mm) x 2.75” (77mm) 13
CTGS-i2T 10GbE MicroLP Intel® X550 2 RJ45 (10GBase-T) 4.45” (113mm) x 1.54” (39mm) 12
MGP-i2 GbE SIOM Intel® i350 AM2 2 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 3.7
MGP-i4 GbE SIOM Intel® i350 AM4 4 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 4.4
MTGN-i2S 10GbE SIOM Intel® 82599ES 2 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7.2
MTG-i4S 10GbE SIOM Intel® XL710-AM1 4 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7
Networking Adapter List

v
Preface
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Asia-Pacic
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho Dist., New Taipei City 235
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Website: www.supermicro.com.tw
Email: [email protected] (Technical Support)
Tel: [phone] (Technical Support)

Table of Contents
Preface
About this User's Guide ................................................................................................ 3
About this Add-on Card................................................................................................. 3
Returning Merchandise for Service............................................................................... 3
Conventions Used in the User's Guide......................................................................... 4
Naming Convention....................................................................................................... 4
SMC Networking Add-on Cards .................................................................................... 4
Contacting Supermicro.................................................................................................. 5
Chapter 1 Overview
1-1 Overview ......................................................................................................... 1-1
1-2 Key Features................................................................................................... 1-1
1-3 Specications .................................................................................................. 1-2
Chapter 2 Hardware Components
2-1 Add-On Card Image and Layout..................................................................... 2-1
2-2 Major Components.......................................................................................... 2-2
2-3 Connectors and LEDs..................................................................................... 2-3
LAN Ports ................................................................................................... 2-3
LED1 and LED2 ......................................................................................... 2-3
Thermal Alert LED...................................................................................... 2-3
2-4 Jumpers........................................................................................................... 2-4
Explanation of Jumpers .................................................................................. 2-4
LAN Port Enable/Disable ........................................................................... 2-4
Thermal Alert Connector ............................................................................ 2-4
S1 DIP Switch ............................................................................................ 2-5
Chapter 3 Installation
3-1 Static-Sensitive Devices.................................................................................. 3-1
Precautions ..................................................................................................... 3-1
Unpacking ....................................................................................................... 3-1
3-2 Before Installation ........................................................................................... 3-2
3-3 Installing the Add-on Card .............................................................................. 3-2
3-4 Installing Drivers on Windows......................................................................... 3-4
3-5 Installing Drivers on Linux............................................................................... 3-4
Build a Binary RPM Package.......................................................................... 3-4
3-6 Installing Drivers on FreeBSD ........................................................................ 3-6
AOC-MTGN-i2S Add-on Card User's Guide
vi

Chapter 1: Overview
1-1
Chapter 1
Overview
1-1 Overview
Congratulations on purchasing your add-on card from an acknowledged leader in
the industry. Supermicro products are designed with the utmost attention to detail
to provide you with the highest standards in quality and performance. For product
support and updates, please refer to our website at http://www.supermicro.com/
products/nfo/networking.cfm#adapter.
1-2 Key Features
• Dual SFP+ Connectors
• Super I/O Module (SIOM) Form Factor
• Intel® QuickData Technology
• VMDq, Next-Generation VMDq, and PC-SIG SR-IOV for Virtualized Environ-
ments
• Load Balancing on Multiple CPUs
• iSCSI Remote Boot Support
• Fibre Channel over Ethernet (FCoE) Support
• Support for most Network Operating Systems
• NC-SI for Remote Management
• RoHS compliant 6/6
• Supports both Direct Atttach Copper and Fiber Cables

1-2
AOC-MTGN-i2S Add-on Card User's Guide
1-3 Specications
General
• Intel®82599ES 10GbE controller
• Super I/O Module (SIOM) Form Factor
• Dual SFP+ ports
• Load balancing on multiple CPUs
• iSCSI remote boot support
• Fibre Channel over Ethernet (FCoE) support
• Intel®PROSet Utility for Windows®Device Manager
• Time Sync IEEE 1588
I/O Features
• Direct Cache Access (DCA) to avoid cache misses
• MSI-X support to minimize the overhead of interrupts, allowing load-balancing
between multiple cores/CPUs
• Tx/Rx IP, SCTP, TCP and UDP checksum ofoading capabilities (IPv4, IPv6)
• Receive and Transmit Side Scaling for Windows environments and scalable I/O
for Linux environments
Virtualization Features
• VMDq, Next-Generation VMDq (64 queues per port)
• PC-SIG SR-IOV implementation (64 virtual functions per port)
• Advanced Packet Filtering
• VLAN support to allow creation of multiple VLAN segments
• VXLAN through Software

Chapter 1: Overview
1-3
Management Features
• Preboot eXecution Environment (PXE) support
• Simple Network Management Protocol (SNMP) and Remote Network Monitoring
(RMON) statistics counters
• iSCSI remote boot
• NC-SI for remote management
• Asset Management support on Supermicro® platforms
• Controller asset tags such as part number, revision, serial number, and MAC
addresses
Advanced Software Features
• Teaming support
• IEEE 802.3ad (link aggregation control protocol)
• IEEE 802.1Q VLANs
• IEEE 802.3 2005 ow control support
OS Support
• Windows Server 2012 R2, 2012, 2008 R2 (x64 Edition)
• Windows 8.1, 8, 7 (x64 Edition)
• RedHat Linux
• SUSE Linux
• FreeBSD
• UEFI
• VMware

1-4
AOC-MTGN-i2S Add-on Card User's Guide
Cables Support
• SFP+ direct attach twinaxial copper cables up to 7m
• Fiber-optic cables (with required optional SFP+ transceivers)
Power Consumption
• Typical power consumption: 6.2W
• Maximum power consumption: 7.2W
Operating Conditions
• Operating temperature: 0°C to 55°C (32°F to 131°F)
• Storage temperature: -40°C to 70°C (-40°F to 158°F)
• Storage humidity: 90% non-condensing relative humidity at 35°C
Physical Dimensions
• Card PCB dimensions: 92mm (3.62in) x 87.1mm (3.43in) (W x D)
Optional Accessories
• AOC-E10GSFPSR: SFP+ transceiver module for short range ber cables (up to
300m), 10G/1G, 850nm, MMF, LC
• AOC-E10GSFPLR: SFP+ transceiver module for long range ber cables (up to
10km), 10G/1G, 1310nm, MMF, LC
• AOC-TSR-FS: SFP+ transceiver module for short range ber cables (up to
300m), 10G/1G, 850nm, MMF, LC
• AOM-TSFP-709DMZ-AVG: SFP+ transceiver module for short range ber cables,
10G/1G, 850nm, MMF, LC
• CBL-0347L: 1m 10GbE SFP+ to SFP+ copper cable, Passive, 30AWG, Pull Type
• CBL-NTWK-0347: 1m 10GbE SFP+ to SFP+ copper cable, Passive, 30AWG,
Push Type