SUPRENT HC575 User manual

This user manual tries to ensure the accuracy of the
information, please kindly point it out for our improvement
in the future, if there are any errors on the images or the
texts. We'd be very appreciative of your support and effort.
In addition: If the technique of the trimmer has been
improved, it will be upgraded and updated in the new
version as well as the specification without announcment.
The SUPRENT hair clippers provide a quick and easy way to create
professional-looking haircuts. Developed to combine
professionla-grade blades with premium guide combs, this hair
clipper enables you to achieve customized, modern looks and
traditional hairstyles. To help you create those styles, and to extend
the life of your hair clipper, please read all instructions before using. ● Oiling Indication
When the product working time reaches 60 minutes in total, the
oiling indicator begins to blink to remind you clean and oil the blade
●Speed Indication (RPM)
5-speed modes are available: 5000/5500/6000/6500/7000 RPM
●Battery /Charging Reminder
1. When the battery reaches 10%, 5%, 0%, it will beep 3 times.
2. When the battery reduces to 5%, the charging indicator blinks
When plugging the power adapter into the socket, there will be a
"beep", the charging indicator will flash from bottom to top.
3. After the battery is fully charged, there will be a"beep and the
battery capacity reminder shows 100% and the charging light blinks
at the same time.

want

1. Inspect the clipper, making sure that it is free of oil between the cutting blade teeth and
turn the unit on to distribute the oil and to make sure it is running smoothly. Wipe off any
excess oil. This should be done after each use. While using the unit, untwist the cord from
time to time to avoid tangling.
2. Seat the person so their head is approximately at your eye level. This allows ease of
visibility while cutting and a relaxed control of the unit.
3. Before cutting always comb the hair first so that it is tangle-free and as it is naturally
worn.
1. Guide combs should be installed by first hooking the blade teeth front side of the guide
comb. Then press the back of the guide comb down until it snaps into place.
2.Ensure the comb is attached before beginning to cut hair.
3. To remove, pull the snap tab on backside of the guide comb and pull the comb off.
● Using the comb attachment 9mm or 12mrn, cut the top of head from back to front against
the direction in which the hair normally grows (see diagram 4). In some cases, this may
require the reverse, or cutting from front to back.
● Comb attachments 3mm or 6mm are used to achieve a close crew cut or short cut.
● For longer hair on top, use the comb provided and lifts the hair on the top of the head. Cut

over the comb, with the hair lifted or hold the hair between the fingers to lift it and cut it to
the desired length (see diagrams 5 and 6). Always work from the back of the head. Hair can
be cut shorter gradually by reducing the space between the comb/fingers, and the head.
Comb out trimmed hair and check for uneven strands.
● Finally, use the Taper Lever without an attachment comb for close trimming around the
base of the neck, the sides of the neck and the ears.
● To produce a clean straight line at the sideburns,
reverse the Clipper by turning the reverse side uppermost
(see diagram 7).
● Press the Clipper at right angles to the head, tips of the
blades lightly touching the skinand work downwards.
This way will obtain, as a clean-cut as would be given by a
razor.
-At regular intervals the blade set should be removed and cleaned Brush out hairs from
between the blades with a soft cleaning brush.
-Do not remove the lubricating grease on the plastic components. It is not necessary to
remove the small moving blade from the unit.
-Place a few drops of clipper oil onto tthe blade's gliding surface. Wipe off excess oil.
1. Unit must be off. Hold unit securely in one hand Grip
blade and push with your thumb the top of the blade away
from the unit.
2. Use enough force to move the blade of the retaining
snaps and the blade off the bottom.
3. Pull blade away from the unit. Reverse order to reattach blade.
Cleaning
1.Turn off clipper and detach blades.
2.Use the brush included to remove the accumulated hair from the cutters.
3.Rinse the inside of the cutter and blades. Clean the body of the hair clipper with a damp
cloth or under running water.

1. This product is not suitable for the following people: people whose physical or mental
ability has deteriorated, or those who lack experience and knowledge of using. So these
people must be supervised by other people when using this product
3. Do not use attachments not recommended by the manufacturer.
4. Be sure to check carefully before using the product. If there is any damage, please stop
using it
5. Please use, charge and store this product at a temperature between 15℃-30℃.
6. Please do not use compressed gas, steel wool, abrasive cleaners or aggressive liquid (oil
or acetone) to clean the device, or the device may be corroded.
7. Do not use this appliance with a damaged or broken cutter unit, as injury may occur.
Always make sure blades are aligned properly.
8. Do not use this appliance with a damaged or broken comb nor with teeth missing from
the blades as injury may occur.
9. Do not pull, twist, or wrap line cord around appliance Never drop or insert any object into
any opening on this appliance
10. Do not place the appliance on any surface while it is operating
11. Do not place or store the appliance where it can fall or be pulled into a tub or sink.
1. The battery may run out during long-distant transportation. It's recommended to fully
charge the device before first use.
2. The device is equipped with a Micro-USB charging cable, and a 5V/1A adapter is not
included.
3. Always attach the plug to the appliance and then the adapter to the outlet. To disconnect
tum all controls to OFF, remove the adapter from the outlet, then detach the power cord
from the clipper for storage.
4. Please keep the body of the device away from water or other liquid.
5. To maximize battery life trimmer should be shut "OFF" immediately after use.
6. Close supervision is necessary when this appliance is used by, on, or near children or
persons with special needs.
7. Use this appliance only for its intended use as described in this manual.
8. Keep the USB changing cord away from heated surfaces.
9. Before use, making certain blades are aligned properly.
10. Unplug this appliance before cleaning.