Surecom EP-808X-R User manual

8-Port 100/10M
N-Way Mini Switch
7IAH\I/KE@A
:sdradnatS:sdradnatS :sdradnatS :sdradnatS:sdradnatStenrehtET-ESAB013.208EEEI tenrehtEtsaFXT-ESAB001u3.208EEEI noitaitogen-otuayaW-N3.208dtSEEEI/ISNA tnerapsnarT:sepytemarF3.208EEEI setyB8151-46:ezisemarfreyalCAM3.208EEEI xelpuD-lluFroflortnocwolfx3.208EEEI
:locotorP:locotorP :locotorP :locotorP:locotorPDC/AMSC
:ygolopoT:ygolopoT :ygolopoT :ygolopoT:ygolopoTratS
noissimsnarTnoissimsnarT noissimsnarT noissimsnarTnoissimsnarT :dohteM:dohteM :dohteM :dohteM:dohteMdrawrof-dna-erotS
:etaRrefsnarT:etaRrefsnarT :etaRrefsnarT :etaRrefsnarT:etaRrefsnarT )xelpuD-lluF(spbM02;)xelpuD-flaH(spbM01:tenrehtE )xelpuD-lluF(spbM002;)xelpuD-flaH(spbM001:tenrehtEtsaF
:aideM:aideM :aideM :aideM:aideM ;)m001(5,4,3.taCPTUriaP-2:T-ESAB01 )m001(PTSmho-001865-AIT/AIE ;)m001(5.taCPTUriaP-2:XT-ESAB001 )m001(PTSmho-001865-AIT/AIE
:stroPfo.oN:stroPfo.oN :stroPfo.oN :stroPfo.oN:stroPfo.oNstrop54-JRspbM01/001thgiE
/gniretliFtekcaP/gniretliFtekcaP /gniretliFtekcaP /gniretliFtekcaP/gniretliFtekcaP :etaRgnidrawroF:etaRgnidrawroF :etaRgnidrawroF :etaRgnidrawroF:etaRgnidrawroF)spbM01&spbM001rof(troprepdeeps-eriW
:noisnemiD:noisnemiD :noisnemiD :noisnemiD:noisnemiD)HxWxL(mm5.23x5.001x8.381
:noitpmusnoC:noitpmusnoC :noitpmusnoC :noitpmusnoC:noitpmusnoC)xaM(sttaw5
:erutarepmeT:erutarepmeT :erutarepmeT :erutarepmeT:erutarepmeT 0:gnitarepO
0
55~C
0
C
0:egarotS
0
56~C
0
C
:ytidimuH:ytidimuH :ytidimuH :ytidimuH:ytidimuH %09~%01:gnitarepO %59~%5:egarotS
:ecnamrofnoC:ecnamrofnoC :ecnamrofnoC :ecnamrofnoC:ecnamrofnoCAssalCkraMEC,AssalCCCF
%
Technical Specifications
#471808XR00Z0
www.surecom-net.com
www.surecom.com.tw
EP-808X-R

This users guide is applied to the 8 ports 100/10M
N-Way Mini Switch . The 8-Port 100/10M N-Way
Mini Switch is designed or easy installation and
high per ormance in an environment where tra ic
on the network and the number o users increase
continuously. Small businesses and corporate
branch o ices can now take ull advantage o
100Mbps Fast Ethernet per ormance and preserve
existing desktop investment with no changes
required to PCs, NICs, cabling, drivers, or PC
con igurations.
_One 8-Port 100/10M N-Way Mini Switch
_One External Power Adapter
_Two Screws
_Two Anchors
_This Users Guide
Introduction
Package Contents
Hardware
The ollowing describes the ront panel, rear panel
and LED indicators o the 8-Port 100/10M N-Way
Mini Switch .
_Provide one Uplink port or uplink to another
switch, hub or repeater
_Store-and- orward switching scheme capability to
support rate adaptation and ensures data integrity
_Auto-negotiation on each port.
_Auto-polarity detection or correction o incorrect
polarity on the received twisted pair on each port
_Data orwarding rate 148,800 pps per port at 100%
o wirespeed
_Data iltering rate eliminates all error packets, runts,
etc. at 148,800 pps per port at 100% o wire-speed
_The shortest orwarding latency time
_Con orms to IEEE 802.3 10BASE-T and IEEE 802.
3u 100BASE-TX standards
_Eight 100/10Mbps RJ-45 ports
_Support store-and- orward mode switching
_Full and Hal -Duplex mode operation
_IEEE802.3x low control or Full-Duplex operation
_Back pressure or Hal -Duplex low control
_Support one Uplink port or expansion
_Auto-negotiation capability
_Source address learning and aging unction
_LEDs to indicate : TEST, Speed/ACT.,FDX/COL.,
and Power status
Key Features
Front Panel
 !"# $ &%
Speed
Act.
FDX
Col.

Performance Highlights

DELroloCsutatSnoitpircseD forebmuN
DEL
rewoPneerGnOnorewoP1
tseTwolleYnOrorretsetpooL
srucco 1
.tcA/deepS
neerG
nO ospbM001
tropdetcennoc
)8-1(8
gnihsalF atadrospbM001
gniviecer
wolleY
nO ospbM01
tropdetcennoc
gnihsalF atadrospbM01
gniviecer
.loC/XDFneerG
nO osutatsxelpuD-lluF
tropdetcennoc )8-1(8
gnihsalF osrucconoisilloC
M001roM01
1. Uplink
The Uplink port is used to connect to other
switches or hubs. The Uplink port is shared with
the port #1.
2. RJ-4 Ports
Eight N-Way Mini RJ-45 STP ports all come with
auto-negotiation and operate at 100/10Mbps or
connection to servers and hubs. All ports can be
con igurated or Full/Hal -Duplex mode.
3. Power Connector
For the external 7.5V DC power adapter that
connects to power outlet.
Rear Panel
LED Indicators
The ollowing igures illustrate the connections o
8-Port N-Way Mini Switch.
PC to Switch
A PC can be connected to the 8-Port N-Way Mini
Switch via a two-pair Category 3/4/5 UTP/STP
straight cable. The PC (equipped with a RJ-45 100/
10Mbps jack) should be connected to any o eight
ports.
The 8-Port N-Way Mini Switch
Note: The LED indicators for PC con-
nection are dependant on the LAN card
capabilities. If LED indicators are not
illuminated after makin a proper
connection, check the PC LAN card, the
cable, the N-Way Mini Switch conditions
and the connections.
!"
Network Connection

FCC Statement
This equipment can generate, use and radiate radio
frequency energy and, if not installed and used in accor-
dance with the instructions in this guide, may cause
interference to radio communications. This equipment has
been tested and found to comply with the limits for a Class
A computing device pursuant to Subpart J of art 15 of the
FCC rules, which are designed to provide reasonable
protection against radio interference when operated in a
commercial environment. Operation of this equipment in
a residential area is likely to cause interference, in which
case the user, at his own expense, will be required to take
whatever measures are necessary to correct the
interference.
CE Declaration of conformity
This equipment complies with the requirements relating to
electromagnetic compatibility, EN 55022 class A for ITE
and EN 50082-1. This meets the essential protection
requirements of the European Council Directive 89/336/
EEC on the approximation of the laws of the Member
States relating to electromagnetic compatibility.
Trademarks
All company, brand, and product names are trademarks or
registered trademarks of their respective companies.
1-Year Warranty
The manufacturer warrants to the original consumer /
purchaser free from defects in materials or workman-
ship for limited time from the original factory shipment
date.
DISTRIBUT R
Date Purchased:
Where Purchased:
From Whom:
Model: Serial :
!
!
TO:
ATTN:
WARRANTY REGISTRATION CARD
Please complete this form and return it within 10
days of purchase to validate the warranty
Name/Title:
Company:
Address:
Tel. No.: Signature:
Purchase Model: Serial No.:
Purchase from:
Address:
Date of Purchase:
lace
Stamp
Here
KEEP THIS STUB FOR YOUR RECORDS
MANUFACTURER
SUREC M
Copyright 2000 by SUREC M Technology Corp.
All rights reserved.
c
Copyright
No part of this guide may be reproduced by any means
without written permission from SUREC M Technology
Corp., except that the purchaser may copy necessary
portions for internal use only.

The ollowing are LED indicator possibilities or a
PC to the N-Way Mini Switch connection:
1. The Speed/Act. LED indicator illuminates upon
hookup.
2. The FDX/Col. LED indicator depends upon
LAN card capabilities.
Switch to Hub
A hub (10BASE-T or 100BASE-TX) can be con-
nected to the N-Way Switch via a two-pair Cat-
egory 3/4/5 UTP/STP straight cable. The connec-
tion is accomplished rom any normal port o the N-
Way Mini Switch to the uplink port o the con-
nected hub.
Hub without Uplink Port
Usin strai ht cable
When using straight cable, the connection can be
made rom the Uplink port shared with the port #8
o the 8-Port N-Way Mini Switch to any port o the
Hub (see igure 3-3.
Usin crossover cable
When using crossover cable, the connection can
be made rom any port (the port #1-8) o the 8-Port
N-Way Mini Switch to any port o the Hub (see
igure 3-3).
The 8-Port N-Way Mini Switch
HUB
The 8-Port N-Way Mini Switch
Crossover Cable
Straight Cable
HUB A
HUB B
#$