SWELLPRO SplashDrone 4 User manual

SplashDrone 4
Maintnance Manual
Visit www.swellpro.com for the latest version of this manual and firmware updates for your drone and
accessories.
V1.0 –June 2021

2©2021 SwellPro
The daily maintenance of the aircraft will directly affect its performance, lifespan, and
flight safety. To avoid safety hazards and maintain the aircraft’s proper functioning,
please be familiar with this manual and do the proper maintenance regularly.
Inspection
Fuselage
⚫Check the exterior, especially for the gaps and screws.
⚫Make sure that the power button and battery LED indicator is working properly.
⚫Make sure that the arm and landing gear are not damaged.
⚫Make sure the battery compartment cover is tightly sealed to prevent the battery
from falling off or water getting in during the flight.
⚫Make sure that all connectors at the bottom of the aircraft are tightly sealed to
prevent falling off or water getting in during the flight.
⚫Keep the body and top cover sealing clean, dust-free. Sand or other mid-size
particles might affect proper waterproof sealing.
⚫Make sure that the sealings have no defects or breaks. If required, light lubricant
(Vaseline or silicone oil) can be applied to the sealing ring area.
Battery
⚫Check the exterior of the battery. If the battery is swollen, leak, or surface crack is
observed, replace the battery, and dispose of the damaged battery properly in a
proper battery dispose manner.
⚫Make sure the battery does not move or come off after installation.
⚫Make sure the battery life is sufficient to complete the flight and fully charged
before each flight.
⚫Make sure that the battery plug is not bent, cracked, or blocked.
⚫Make sure the battery connector is clean. If the pins appear to be oxidated (looks
greenish or rusty), replace the battery.
Motor
⚫Check the exterior of the motor to see if there are any damages.
⚫Rotate the motor to check if there is any obvious resistance to turning the motor.
⚫Start the motor without installing the propeller, and check if there are any abnormal
noises.
⚫Make sure that the motor screws are securely installed. If there is a crack in the
housing of the mounting motor, please contact SwellPro after-sales service.
⚫Check the motor gap for any salt, or other residuals. Rinse and clean thoroughly
with water.

©2021 SwellPro 3
Propeller
⚫Check the exterior of the propeller. If there are breakages, cracks, or creases,
replace the propeller.
⚫Be aware of the CW/CCW mark both on the propellers and the motors, and make
sure that the propellers are installed correctly accordingly.
⚫Check the symmetry of the propellers. Start the motor and observe the propeller's
rotation. If there the propellers on the diagonal sides rotate in a different direction
and accompany by severe vibrations. Replace the propellers.
Gimbal Camera
⚫Make sure that the gimbal can move freely within its full range. If not, please
contact SwellPro after-sales service.
⚫If the motor shaft is not working properly or the image transmission is abnormal,
please check and make sure the connection between the gimbal camera and the
aircraft is correct.
⚫Make sure that the gimbal connector is not bent, cracked, or blocked, the contact
surface is clean and free of sand or other particles.
⚫Check the camera cable. If there are any cracks or breakages, please contact
SwellPro after-sales service.
⚫Keep the camera lens clean. To clean the lens, use dedicated camera cleaning kits.
Do not use a random solution for cleaning.
⚫If the live-viewing image is shaky, please contact SwellPro after-sales service.
⚫Check the motor gap for any salt crystallization, and if so, soak thoroughly with
fresh water and clear it out.
⚫Make sure the connector plate is clean and free of any sand or other particles.
Remote Controller
⚫Check the exterior of the remote control to see if there are any damages.
⚫Make sure that the buttons, switches, joysticks, knobs, and antennas are working
properly. If there is abnormal friction or clamping problem, contact SwellPro after-
sales service.
⚫Check that the display is working properly.
⚫Check all the functions of the remote controller according to the user manual. If
there are any problems, please contact SwellPro after-sales service.
APP
⚫Please always update the latest app for a better flight experience.
Maintenance

4©2021 SwellPro
⚫After flying the drone out to the ocean, please rinse the aircraft with clean fresh
water right away, especially for the motor, the gimbal camera to prevent the
formation of salt and other residuals.
⚫If salt and other residuals being observed, soak the part into clean freshwater
thoroughly and clean out the residuals.
⚫If the drone is wet, wipe away the water before you open the GPS cover to avoid
water dripping into the cabin.
⚫Keep the aircraft clean, especially the lens. Recommend using a soft cloth and
freshwater to clean the aircraft. Do not use any corrosive solvents for cleaning.
⚫Keep water, dust, or other particles from entering the aircraft.
⚫Avoid prolonged exposure to the sun.
⚫When not in use for a long period, store the aircraft in a dry and ventilated
environment, best at around 20°C - 28°C.
Store and Transport
⚫Before putting the aircraft into storage, turn off the power, disconnect the battery
plug, and clean the aircraft.
⚫Store all the aircraft parts and accessories together.
⚫Storage the aircraft in a dry, ventilated, cool temperature (20°C - 28°C).
⚫If not planning to use a drone in the near future, be sure to discharge the remote
controller’s battery to about 50% (about 7.9V) and charge the intelligent battery to
100% for storage.
⚫If the aircraft is not in used for a long period, to maintain battery activity, complete
the charge and discharge every 2 months.
⚫Do not overdischarge the battery for storage or store the battery for an extensive
period of storage (<2 months), as overdischarge the battery resulting in permanent
damage causing the battery not able to be recharged again.