Installing the appliance
1. Ensure that the DIP switches are in the off (down) position.( )
2. Plug the power cord into the appliance. Plug the power cord
into an electrical wall socket.( )
3. Plug your Internet connection into a WAN port.( )
4. If you are using a dial-up Internet connection, plug the serial
cable from your external modem into the serial port.( )
5. Plug the Ethernet cables from the computers to be protected
into the LAN ports.( )
6. Press the power button to turn on the appliance.( )
7. Wait for the first LED on the front panel to illuminate solid, Ł
and the third LED on the front panel to blink if one or more Ł
active devices are connected to a LAN port.
Configuring your appliance
The first time you access the appliance, the Setup Wizard guides
you through getting Internet connectivity.
To configure the appliance
1. In a Web browser, in the address text box, type 192.168.0.1.
2. Press Enter.
3. In the Setup Wizard, follow the prompts to connect the
appliance to the Internet.
Where to get more information
For more information on configuring your appliance, see the
following documents:
– Installation Guide
– Getting Started Guide
– Administrator ’s Guide
See the Release Notes for the latest compatibility and function-
ality information.
Online Help is available by clicking the Help button at the top
right of each screen.
0 255075100
3C
4C
50K
50C
41M
41Y
JOB # CLIENT
DATE
7081172
03.10.04 18.5 x 117081172Q02r0.qxd wm
150
DCL
10224354
QUICKSTART CARD BACK
PROOF # TRIM SIZEFILE NAME
DESC./TITLE
MSTR# Operator
LINE SCREEN
CYAN MAGENTA YELLOW BLACK
CELL # 1
