Synargy MF5215 User manual

ASSEMBLY INSTRUCTIONS
CHARM LOUNGE
MODEL: MF5215
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Step 1
Assemble this product in an open space with room to move. Remove the packaging from the
product.
The suite pieces need to have feet attached. These are located in the zipped pocket
underneath each piece. Attach each foot with 2 screws and washers. The center cylinder foot
attaches using an attached screw. Be careful when rotating to avoid damage to the product.
Charm 3 Seater Lounge
The components are heavy, assembly should be performed by two people.
Step 2
Lift the seat backrest to align the metal receivers with the metal posts of the chair base. Allow
the posts to slide into the receivers and press down firmly on the top of the backrest until a click
is heard on each side.
Scan QR code to watch
a video of this step
For care and maintenance tips & tricks, videos, and other
products please visit our website: www.synargy.com

ASSEMBLY INSTRUCTIONS
CHARM LOUNGE
MODEL: MF5215
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Step 1
Assemble this product in an open space with room to move. Remove the packaging from the
product.
The suite pieces need to have feet attached. These are located in the zipped pocket
underneath each piece. Attach each foot with 2 screws and washers. Be careful when rotating
to avoid damage to the product.
Charm 2 Seater Lounge
The components are heavy, assembly should be performed by two people.
Step 2
Lift the seat backrest to align the metal receivers with the metal posts of the chair base. Allow
the posts to slide into the receivers and press down firmly on the top of the backrest until a click
is heard on each side.
Scan QR code to watch
a video of this step
For care and maintenance tips & tricks, videos, and other
products please visit our website: www.synargy.com

ASSEMBLY INSTRUCTIONS
CHARM LOUNGE
MODEL: MF5215
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Step 1
Assemble this product in an open space with room to move. Remove the packaging from the
product.
The armchair needs to have feet attached. These are located in the zipped pocket underneath
the seat. Attach each foot with 2 screws and washers. Be careful when rotating to avoid damage
to the product.
Charm Armchair
The components are heavy, assembly should be performed by two people.
Step 2
Lift the seat backrest to align the metal receivers with the metal posts of the chair base. Allow
the posts to slide into the receivers and press down firmly on the top of the backrest until a click
is heard on each side.
Scan QR code to watch
a video of this step
For care and maintenance tips & tricks, videos, and other
products please visit our website: www.synargy.com