Synargy Smart Comfort 806212 User manual

Model: 806212
Please read these instructions carefully before operating.
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is disconnected from the power outlet and the back is
in the full upright position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever detect a burning odour or smoke coming from the
product.
• Do not operate this product if liquid spillage occurs on or around it. Disconnect from the power outlet and allow the
product to completely dry before reconnecting.
• Do not operate the power functions or charge station with wet hands.
• Check the condition of the power cord, electrical cords, transformer, plug and connector on a monthly basis. Do not
operate if wear is visible.
• Ensure the power cord, electrical cords and transformer are clear of moving parts and not trapped underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
Assembly Instructions
ASSEMBLY INSTRUCTIONS
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
Please read these instructions carefully before operating.
• Ensure there is no person, animal or item obstructing the area under the footrest before operating this product.
• Improper use or installation may result in the risk of fire, electric shock and/or injury. We assume no liability for any
eventual damages caused by improper use or inappropriate handling, or by any other non-compliance with the
instructions in this manual.
• This product is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the product by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the product.
• This product contains moving parts. Keep fingers, hair and body parts well clear from moving parts. To reduce the
risk of injury, keep children and pets clear of the product when in use.
• Do not sit or place additional weight on the arms, back or open footrest.
• This product is very heavy. Only move this product by lifting the main body. Never drag by the footrest, back or
armrest.
• Return this product to the full upright position to stand safely and prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential use only. It is not suitable for commercial or
outdoor use.
• This product is not intended to be used as part of a health care plan. Consult your medical professional before
operating if you are taking medication or have physical limitations.
• Do not exceed the maximum 120kg weight limit per seat for this product.
WARNING! ENTRAPMENT OR CRUSHING RISK
Ensure there is no person, animal or item obstructing the area under
the footrest before operating this product.
Synargy is a registered responsible supplier on ERAC. Electrical components within our products have been tested and comply
with all legal requirements imposed for electrical safety and EMC.

Assembly Instructions
Please read these instructions carefully before assembling.
1. Assemble this product in an open area with room to move.
2. Remove the external power cords attached to the metal posts B. Set aside for step 7.
3. Attach the seat backs to the base by sliding the metal receivers A over the metal posts B (Figure 1).
Ensure both sides align before pushing down firmly to lock in place. The seat backs are heavy. Ask for help if
you need assistance aligning the posts and receivers. Repeat across all backs.
4. Locate the power cord C on the seat back and connect to power cord Dat the rear of the seat base (Figure
3). Repeat across all seats.
5. On the middle seat (3 Seater) and console (2 Seater), locate the light cord Eattached to the seat back and
connect to light cord Fat the rear of the seat base (Figure 4).
6. Connect power cord G from the middle seat (3 Seater only) to a power outlet (Figure 2).
7. Retrieve the external power cords set aside in step 2 and connect power cord P into the socket on the left
side of the suite when facing from behind. Connect power cord Ointo the socket on the right side (3 Seater
and 2 Seater). Power cord Ocan be identified by the black box plug. Connect both plugs into a power outlet.
8. Check all electrical connections are firmly connected as per the above steps before turning the power
outlet on. Ensure the red switch where power cord Pis connected is switched on and lit up.
9. Your suite is now assembled and ready to be used. Please read the safety instructions before operating.
Refer to www.smartcomfort.com.au or www.smartcomfort.co.nz for troubleshooting information.
ASSEMBLY INSTRUCTIONS 2 Seater Recliner
V1
OPERATION INSTRUCTIONS
Button Functionality
HOME Push and hold to return the seat and headrest to the upright position.
OPEN Raises the footrest and reclines the seat back into the reclined position.
CLOSE Returns the seat to the upright position.
UP Raises the headrest.
DOWN Lowers the headrest.
LIGHT On/Off for the base and cup holder lights. Push and hold to cycle through the 7 colour options.
Cup Holder Controller
3 Seater
Figure 1 Figure 2 Figure 3 Figure 4
If you experience difficulties with the suite please contact the store from which it was purchased.