ASSEMBLY INSTRUCTIONS
Please read these instructions carefully before assembling.
1. Assemble this product in an open space with room to move. There are five modules—1 x Left Arm, 1 x
Right Arm, 1 x 2 Seat Armless and 2 x Consoles.
2. Connect the seat backs to the bases of each module by sliding the metal receivers on the seat back
into the metal posts on the base. Ensure the correct seat back has been selected and that both sides
align before pushing down firmly into place (Figure 1). The seat backs are heavy. Ask for help if you
need assistance aligning the posts and receivers.
3. On all seats, connect the two power cables for the Power Headrest (Figure 2). Velcro all backs down
onto the base.
4. Using the brackets down the side of each module
(Figure 3), connect the Left Arm and Left side of the
2 Seat Armless to one Console. Connect the Right
Arm and Right side of the 2 Seat Armless to the
remaining Console.
Figure 3
Figure 1
Figure 2
Assembly Instructions
SAFETY INSTRUCTIONS
Please read these instructions carefully before operating.
• Improper use or installation may result in the risk of fire, electric shock and/or injury. We assume no
liability for any eventual damages caused by improper use or inappropriate handling, or by any other
non-compliance with the instructions in this manual.
• This product contains moving parts. Keep fingers, hair and body parts well clear from moving parts.
To reduce the risk of injury, keep children and pets clear of the product when in use.
• Supervise children or disabled persons using this product.
• Ensure sufficient space around this product for operating the reclining back and footrest. Remove
any objects which obstruct moving parts.
• Do not sit or place additional weight on the arms, back or open footrest.
• This product is very heavy. Only move this product by lifting the main body. Never drag by the
footrest, back or arm rest.
• Return this product to the full upright position to exit safely and prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential use only. It is not suitable for
commercial or outdoor use.
• This product is not intended to be used as part of a health care plan. Consult your medical
professional before operating if you are taking medication or have physical limitations.
• Do not exceed the maximum 120kg weight limit for this product.
ELECTRICAL SAFETY
Please read these instructions carefully before operating.
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is disconnected from the power
outlet and back is in the full upright position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever detect a burning odour or smoke
coming from the product.
• Do not operate this product if liquid spillage occurs on or around it. Disconnect from the power
outlet and allow product to completely dry before reconnecting.
• Do not operate the power functions or charge station with wet hands.
• Check the condition of the power cord, electrical cords, transformer, plug and connector on a
monthly basis. Do not operate if wear is visible.
• Ensure the power cord, electrical cords and transformer are clear of moving parts and not trapped
underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
