Synology DX513 User manual

лчиттничюнльтцию.
глтчн.Бзвыдны
www.sotmarket.ru
дбняинфмциятв,
тзывы,бзыиы
Инструкция
Synology DX513
Перейти в карточку товара
8 800 775 98 98

DX513 User’s Guide
Syno_UsersGuide_DX513_20120727

Table of Contents
TOC
i
1 Chapter 1: Get Started with DX513
1 Package Contents
2 
3 Appearance
4 Default/Manual Switch Behavior
4 LED Indication Table
6 Safety Instructions
7 Chapter 2: Set Up DX513
7 Tools and Parts for Hard Disk Installation
10 Install Hard Disks
11 Connect with Synology DiskStation
12 Work with Synology DiskStation
13 Learn More

1
1
Congratulations on your purchase of Synology DX513. This product is specially
designed for the storage expansion of Synology DiskStation. This user’s guide
will guide you through the installation.
Package Contents
Before installation, please check the package contents to verify that you
have received the items below.
Main Unit AC power Cord
User’s Guide
Screws for 3.5”
Hard Drives x 24
Screws for 2.5”
Hard Drives x 24
Hard drive tray
key x 2 Expansion Cable
Get Started with DX513

2 Chapter 1: Get Started with DX513

Internal HDD 5X SATA(II)
Expansion Port # 1
Max Capacity (Internal HDD) 5X 4TB
Hot Swappable HDD Yes
Size (HxWxD) (mm) 157 x 248 x 233mm
Weight 3.91 kg
System Fan 2X (80x80mm)
Noise Level (Fan-only) 30dB (2500rpm)
Power Recovery Sync with the connected DiskStation
(Default Mode)
AC Input Power Voltage 100V to 240V AC
Power Frequency 50 / 60Hz, Single Phase
HDD Temperature (Room: 27°C) 46°C
HDD Temperature (Room: 40°C) 55°C
Operating Temperature 5°C ~ 35°C (40°F ~ 95°F)
Storage Temperature -10°C ~ 70°C (15°F ~ 155°F)
Relative Humidity 5% to 95% RH
Maximum Operating Altitude 10,000 feet
 FCC Class B, CE Class B, BSMI Class B
Supported Models
DS710+, DS712+, DS1010+, DS1511+,
DS1512+, DS1812+
(Used as independent volume: DS112, DS112+,
DS212+, DS213+, DS412+, DS413)
Note:
1 Please visit www.synology.com for the latest compatible models.
2 DSM needs to be upgraded to version 4.0-2240 or above.

Chapter 1: Get Started with DX513 3
Appearance
Front View
LED Indicators
POWER
Button
Hard Drive Tray
Hard Drive
Tray Lock
Back View
Power Port
Expansion
Port
RESET Button
Fan
Default/Manual
Switch
Article Name Location Description
POWER Button Front
The POWER button is used to turn DX513 on or off.
Press and hold the button for 7 seconds to shut down
DX513.
Note: DX513 will be turned on or off automatically when
the connected Synology DiskStation powers on or off.
However, the POWER button has no power-off function
when volume is created to prevent accidental volume
damage.

4 Chapter 1: Get Started with DX513
Article Name Location Description
LED Indicators Front
The LED indicators are used to display the status of
the internal disks and the system. For complete details,
please refer to the table: LED Indication Table.
Hard Drive Tray Front The hard drive tray is designed for loading the hard
drives with DX513.
Hard Drive
Tray Lock Front Each hard drive tray is equipped with one tray lock to
lock or unlock the tray to DX513.
Default/Manual
Switch Back
In the default mode, DX513 can auto power on/off
with the connected Synology DiskStation, while in the
manual mode, DX513 cannot auto power on with the
DiskStation when using its independent volume. For
more details, please refer to the table: Default/Manual
Switch Behavior.
Expansion Port Back The expansion port is used to connect any Synology
DiskStation listed in the table: Supported Models.
Fan Back
The fan is built to exhaust waste heat out of DX513.
If the fan is not working, DX513 will “beep” every few
seconds.
RESET Button Back The RESET button is used to restore the settings to the
factory default.
Power Port Back The power port is where you connect the power cord to
DX513.
Default/Manual Switch Behavior
Mode Expand DiskStation
Internal Volume Independent Volume
Default Auto power on/off Auto power on/off
Manual Auto power on/off Auto power off
LED Indication Table
LED Behavior Description
POWER Solid Blue Power is on
Off Power is off
eSATA Solid Green Synology DiskStation is connected
Off Synology DiskStation is disconnected
RAID
Solid Green Volume is created
Flashing Green Volume is degraded
Off Volume is crashed or not created

Chapter 1: Get Started with DX513 5
LED Behavior Description
STATUS Solid Green System is functioning
Off System is not working
ALERT Solid Orange Fan is not working
Off Fan is functioning
Hard Disk
Status
(on tray)
Solid Green Disk is ready and idle
Flashing Green Disk is being accessed
Solid Orange Read/write or other errors are encountered
Off No internal disk is found